Jtdylktuy

Question

usepackage{multirow}

begin{table}[htbp]

begin{tabular}{p{2.5cm}p{2.5cm}p{1.5cm}p{6.5cm}}

hline

multicolumn{2}{c}{textbf{Parameters}}                       & multirow{2}{*}{textbf{Used value}} & multicolumn{1}{c}{multirow{2}{*}{textbf{Definition}}}                                                                                                                                 \

textbf{Original}             & textbf{English translation}  &                                      & multicolumn{1}{c}{}                                                                                                                                                                     \

hline

Rechenlauf fortsetzen         & Continue calculation          & No                                   & It determines whether a calculation run is to be continued. If yes, the result data from the file HYDRO_AS 2D.CPR is transferred to the program and used as initial boundary condition. \

Simulationszeit {[}s{]}       & Simulation time {[}s{]}       & 86400                                & It defines the simulation time in seconds                                                                                                                                                \

Zeitintervall SMS {[}s{]}     & Time interval SMS {[}s{]}     & 8640                                 & It defines the time interval (in seconds) for the storage of area-based result data which can be visualized with the SMS program following the calculations.                             \

Zeitintervall Q_Strg {[}s{]} & Time interval Q_Strg {[}s{]} & 900                                  & It defines the time interval (in seconds) for which the data of the node strings are written to the Q_Strg.dat.                                                                         \

Hmin                          & multirow{5}{*}{}             & 0.01 m                               & Minimum water depth                                                                                                                                                                      \

VELMAX                        &                               & 15 m/s                               & Maximum velocity allowed                                                                                                                                                                 \

Amin                          &                               & 1.e-15 mtextsuperscript{2}                            & Minimum element size allowed for calculating the internal calculation time step                                                                                                          \

CMUVISC                       &                               & 0.60                                 & Coefficient cm in the viscosity formula                                                                                                                                                  \

SCF                           &                               & 1.00                                 & Coefficient for the additional acceleration of the calculation process       \

hline                                                                                                           

end{tabular}

end{table}

enter image description here

I would put "used value" on two lines.
– Jay
Nov 13 at 13:04 — Nov 13 at 13:04

score 12 · Answer 1 · 2018-11-13 13:17:07Z

A few points:

use booktabs package for better spacing

use siunitx package to get the space between values and units right

use a tabularx to keep the table within the available textwidth, yours was much wider

subdivide the middle rule

your parameters seems to be the names of some variables? I'd write them either in typewriter font or in small caps.

left align the columns. Justified text in very narrow columns will never look good

you mix if the unit is part of the parameter name of used value. I don't know your program, so no idea what is the correct way, but be consistent

make the content of the table and the rules aligned by using @{}

documentclass{article}



usepackage{geometry}

usepackage{booktabs}

usepackage{array}

usepackage{multirow}

usepackage{tabularx}

usepackage{siunitx}





newcolumntype{L}[1]{>{centeringraggedright}m{#1}}



begin{document}





begin{table}[htbp]

renewcommand{arraystretch}{1.5}

begin{tabularx}{linewidth}{@{}L{2.5cm}L{2.5cm}L{1.5cm}X@{}}

toprule

multicolumn{2}{c}{textbf{Parametershspace{1em}}} & & \

textbf{Original} & textbf{English translation} & textbf{Used value} & textbf{Definition} \



cmidrule(r){1-2} cmidrule(lr){3-3} cmidrule(l){4-4}



Rechenlauf fortsetzen & Continue calculation & No & It determines whether a calculation run is to be continued. If yes, the result data from the file texttt{HYDRO_AS 2D.CPR} is transferred to the program and used as initial boundary condition. \



Simulationszeit & Simulation time & SI{86400}{s} & It defines the simulation time in seconds \



Zeitintervall texttt{SMS} & Time interval texttt{SMS} & SI{8640}{s} & It defines the time interval (in seconds) for the storage of area-based result data which can be visualized with the texttt{SMS} program following the calculations. \



Zeitintervall texttt{Q_Strg} & Time interval texttt{Q_Strg} & SI{900}{s} & It defines the time interval (in seconds) for which the data of the node strings are written to the texttt{Q_Strg.dat}. \



Hmin & multirow{5}{*}{} & SI{0.01}{m} & Minimum water depth \



texttt{VELMAX} & & SI{15}{m/s} & Maximum velocity allowed \



Amin & & SI{e-15}{metersquare} & Minimum element size allowed for calculating the internal calculation time step \



texttt{CMUVISC} & & 0.60 & Coefficient cm in the viscosity formula \



texttt{SCF} & & 1.00 & Coefficient for the additional acceleration of the calculation process \

bottomrule 

end{tabularx}

end{table}



end{document}

enter image description here

Personally I would put also a cmidrule to "Parameters".
– Fran
Nov 13 at 13:23 — Nov 13 at 13:23

score 4 · Answer 2 · 2018-11-13 14:00:10Z

Here's a solution that's very similar to the one posted by @samcarter. E.g., it uses a tabularx environment, doesn't fully justify the cell contents, and uses the macros num, si, and SI of the siunitx package to display numbers, scientific units, and combinations of numbers and associated units.

Some differences:

No line breaks allowed in column 3

Automatic hanging indentation of cell contents in columns 1 and 2

No bold-facing of header cells

Terser language in column 4

Use path macro (provided by url package) to typeset file names

Use of , (comma) as thousands-separator for numbers with 4 or more digits

enter image description here

documentclass{article}

usepackage[a4paper]{geometry} % set page parameters suitably

usepackage[hyphens,spaces,obeyspaces]{url} % for 'path' macro

usepackage{ragged2e,tabularx,booktabs,siunitx}

newcolumntype{L}{>{RaggedRightarraybackslash}X}

newcolumntype{P}[2]{>{RaggedRighthangafter=1hangindent=1em}p{#1}}

begin{document}

begin{table}[htbp]

sisetup{per-mode=symbol,

         tight-spacing,

         group-minimum-digits=4,

         group-separator={,}}

begin{tabularx}{textwidth}{@{} *{2}{P{2.2cm}}lL @{}}

toprule

multicolumn{2}{c}{Parameters} & Used value & Definition \

cmidrule(r){1-2}

Original & English translation \

midrule

Rechenlauf fortsetzen & Continue calculation & No & Determines whether a calculation run is to be continued. If yes, result data from the file path{HYDRO_AS 2D.CPR} is transferred to program and used as initial boundary condition \

Simulations-zeit [si{second}] & Simulation time [si{second}] & num{86400}  & Simulation time, in seconds \

Zeitintervall SMS [si{second}]& Time interval SMS [si{second}] & num{8640} & Time interval (in seconds) for storage of area-based result data which can be visualized with the SMS program following the calculations \

Zeitintervall Q_Strg [si{second}] & Time interval Q_Strg [si{second}] & num{900}  & Time interval (in seconds) for which the data of the node strings are written to path{Q_Strg.dat} \

Hmin               & & SI{0.01}{meter} & Minimum water depth \

VELMAX             & & SI{15}{meterpersecond} & Maximum velocity allowed   \

Amin               & & SI{e-15}{metersquared} & Minimum element size allowed for calculating the internal calculation time step \

CMUVISC            & & num{0.60} & Coefficient cm in viscosity formula \

SCF                & & num{1.00} & Coefficient for  additional acceleration of calculation process \

bottomrule          

end{tabularx}

end{table}

end{document}

Nice answer! The indention looks nice. Tiny problem: path does not preserve the space within the file name (ok, file names should not have spaces, but ...) — Nov 13 at 13:51
@samcarter - Good catch about the space inside the file name! This issue can be remedied easily by adding the option obeyspaces when loading the url package. I'll update the answer accordingly. — Nov 13 at 13:57

score 2 · Answer 3 · 2018-11-13 15:46:50Z

This is a slightly off-topic answer, in that others have covered the TeX aspects better than I could and I concentrate on the writing.

You can tighten up the wording of many of the entries in the last column. The "It" at the start of many entries is definitely superfluous. I'd also drop "determines" or "defines" and the "the". You can lose some other articles as well and generally copy-edit your text into a shorter form. I've had a go for you, see below. I may have overdone it in some cases but I still think the first entry is a little wordy. This saves a line on each of all but one of your multiline items, making the whole lot easier to read. Also you've got full stops on some entries but not others.

I'd also add a little vertical space between rows (the total height can still be less within the copy-editing), to make the last column easier to read . Use raggedright to split lines between words rather than hyphenating I've used raggedright for "Continue Calculation", but not for the teo cells starting "Time interval", to demonstrate the effect. These points are covered in other answers, as is the use of texttt which I've inconsistently demonstrated.

In particular line breaks in variable names and the like should really be avoided

defarraystretch{1.5}%

begin{table}[htbp]

begin{tabular}{p{2.5cm}p{2.5cm}p{1.5cm}p{6.5cm}}

hline

multicolumn{2}{c}{textbf{Parameters}}                       & multirow{2}{*}{textbf{Used value}} & multicolumn{1}{c}{multirow{2}{*}{textbf{Definition}}}                                                                                                                                 \

textbf{Original}             & textbf{English translation}  &                                      & multicolumn{1}{c}{}                                                                                                                                                                     \

hline

Rechenlauf fortsetzen         & raggedright Continue calculation          & No                     & Whether calculation run is to be continued. If yes, results from file texttt{HYDRO_AS 2D.CPR} are transferred to the program and used as initial condition. \

Simulationszeit {[}s{]}       & Simulation time {[}s{]}       & 86400                                & Simulation time (in seconds)                                                                                                                                                \

Zeitintervall SMS {[}s{]}     & Time interval SMS {[}s{]}     & 8640                                 & Time interval (in seconds) for storage of area-based results which can subsequently be visualized with the SMS program.                             \

Zeitintervall Q_Strg {[}s{]} & Time interval Q_Strg {[}s{]} & 900                                  & Time interval (in seconds) for which  data of the node strings are written to texttt{Q_Strg.dat}.                                                                         \

Hmin                          & multirow{5}{*}{}             & 0.01 m                               & Minimum water depth                                                                                                                                                                      \

VELMAX                        &                               & 15 m/s                               & Maximum velocity                                                                                                                                                                  \

Amin                          &                               & 1.e-15 mtextsuperscript{2}          & Minimum element size for calculating internal calculation time step                                                                                                          \

CMUVISC                       &                               & 0.60                                 & Coefficient cm in  viscosity formula                                                                                                                                                  \

SCF                           &                               & 1.00                                 & Coefficient for  additional acceleration of  calculation process       \

hline                                                                                                           

end{tabular}

end{table}

Output

Can you think of a method for reducing the sizable inter-word gaps in the second column? — Nov 13 at 15:38
@Mico more raggedrights will do it -- I'll expand the answer. I prefer to use it locally so I can apply my own judgement as to which cells need it (rather than figuring out a way of making a column ragged -- another question) — Nov 13 at 15:45

score 12 · Answer 4 · 2018-11-13 13:17:07Z

A few points:

use booktabs package for better spacing

use siunitx package to get the space between values and units right

use a tabularx to keep the table within the available textwidth, yours was much wider

subdivide the middle rule

your parameters seems to be the names of some variables? I'd write them either in typewriter font or in small caps.

left align the columns. Justified text in very narrow columns will never look good

you mix if the unit is part of the parameter name of used value. I don't know your program, so no idea what is the correct way, but be consistent

make the content of the table and the rules aligned by using @{}

documentclass{article}



usepackage{geometry}

usepackage{booktabs}

usepackage{array}

usepackage{multirow}

usepackage{tabularx}

usepackage{siunitx}





newcolumntype{L}[1]{>{centeringraggedright}m{#1}}



begin{document}





begin{table}[htbp]

renewcommand{arraystretch}{1.5}

begin{tabularx}{linewidth}{@{}L{2.5cm}L{2.5cm}L{1.5cm}X@{}}

toprule

multicolumn{2}{c}{textbf{Parametershspace{1em}}} & & \

textbf{Original} & textbf{English translation} & textbf{Used value} & textbf{Definition} \



cmidrule(r){1-2} cmidrule(lr){3-3} cmidrule(l){4-4}



Rechenlauf fortsetzen & Continue calculation & No & It determines whether a calculation run is to be continued. If yes, the result data from the file texttt{HYDRO_AS 2D.CPR} is transferred to the program and used as initial boundary condition. \



Simulationszeit & Simulation time & SI{86400}{s} & It defines the simulation time in seconds \



Zeitintervall texttt{SMS} & Time interval texttt{SMS} & SI{8640}{s} & It defines the time interval (in seconds) for the storage of area-based result data which can be visualized with the texttt{SMS} program following the calculations. \



Zeitintervall texttt{Q_Strg} & Time interval texttt{Q_Strg} & SI{900}{s} & It defines the time interval (in seconds) for which the data of the node strings are written to the texttt{Q_Strg.dat}. \



Hmin & multirow{5}{*}{} & SI{0.01}{m} & Minimum water depth \



texttt{VELMAX} & & SI{15}{m/s} & Maximum velocity allowed \



Amin & & SI{e-15}{metersquare} & Minimum element size allowed for calculating the internal calculation time step \



texttt{CMUVISC} & & 0.60 & Coefficient cm in the viscosity formula \



texttt{SCF} & & 1.00 & Coefficient for the additional acceleration of the calculation process \

bottomrule 

end{tabularx}

end{table}



end{document}

enter image description here

Personally I would put also a cmidrule to "Parameters".
– Fran
Nov 13 at 13:23 — Nov 13 at 13:23

score 4 · Answer 5 · 2018-11-13 14:00:10Z

Here's a solution that's very similar to the one posted by @samcarter. E.g., it uses a tabularx environment, doesn't fully justify the cell contents, and uses the macros num, si, and SI of the siunitx package to display numbers, scientific units, and combinations of numbers and associated units.

Some differences:

No line breaks allowed in column 3

Automatic hanging indentation of cell contents in columns 1 and 2

No bold-facing of header cells

Terser language in column 4

Use path macro (provided by url package) to typeset file names

Use of , (comma) as thousands-separator for numbers with 4 or more digits

enter image description here

documentclass{article}

usepackage[a4paper]{geometry} % set page parameters suitably

usepackage[hyphens,spaces,obeyspaces]{url} % for 'path' macro

usepackage{ragged2e,tabularx,booktabs,siunitx}

newcolumntype{L}{>{RaggedRightarraybackslash}X}

newcolumntype{P}[2]{>{RaggedRighthangafter=1hangindent=1em}p{#1}}

begin{document}

begin{table}[htbp]

sisetup{per-mode=symbol,

         tight-spacing,

         group-minimum-digits=4,

         group-separator={,}}

begin{tabularx}{textwidth}{@{} *{2}{P{2.2cm}}lL @{}}

toprule

multicolumn{2}{c}{Parameters} & Used value & Definition \

cmidrule(r){1-2}

Original & English translation \

midrule

Rechenlauf fortsetzen & Continue calculation & No & Determines whether a calculation run is to be continued. If yes, result data from the file path{HYDRO_AS 2D.CPR} is transferred to program and used as initial boundary condition \

Simulations-zeit [si{second}] & Simulation time [si{second}] & num{86400}  & Simulation time, in seconds \

Zeitintervall SMS [si{second}]& Time interval SMS [si{second}] & num{8640} & Time interval (in seconds) for storage of area-based result data which can be visualized with the SMS program following the calculations \

Zeitintervall Q_Strg [si{second}] & Time interval Q_Strg [si{second}] & num{900}  & Time interval (in seconds) for which the data of the node strings are written to path{Q_Strg.dat} \

Hmin               & & SI{0.01}{meter} & Minimum water depth \

VELMAX             & & SI{15}{meterpersecond} & Maximum velocity allowed   \

Amin               & & SI{e-15}{metersquared} & Minimum element size allowed for calculating the internal calculation time step \

CMUVISC            & & num{0.60} & Coefficient cm in viscosity formula \

SCF                & & num{1.00} & Coefficient for  additional acceleration of calculation process \

bottomrule          

end{tabularx}

end{table}

end{document}

Nice answer! The indention looks nice. Tiny problem: path does not preserve the space within the file name (ok, file names should not have spaces, but ...) — Nov 13 at 13:51
@samcarter - Good catch about the space inside the file name! This issue can be remedied easily by adding the option obeyspaces when loading the url package. I'll update the answer accordingly. — Nov 13 at 13:57

score 2 · Answer 6 · 2018-11-13 15:46:50Z

This is a slightly off-topic answer, in that others have covered the TeX aspects better than I could and I concentrate on the writing.

You can tighten up the wording of many of the entries in the last column. The "It" at the start of many entries is definitely superfluous. I'd also drop "determines" or "defines" and the "the". You can lose some other articles as well and generally copy-edit your text into a shorter form. I've had a go for you, see below. I may have overdone it in some cases but I still think the first entry is a little wordy. This saves a line on each of all but one of your multiline items, making the whole lot easier to read. Also you've got full stops on some entries but not others.

I'd also add a little vertical space between rows (the total height can still be less within the copy-editing), to make the last column easier to read . Use raggedright to split lines between words rather than hyphenating I've used raggedright for "Continue Calculation", but not for the teo cells starting "Time interval", to demonstrate the effect. These points are covered in other answers, as is the use of texttt which I've inconsistently demonstrated.

In particular line breaks in variable names and the like should really be avoided

defarraystretch{1.5}%

begin{table}[htbp]

begin{tabular}{p{2.5cm}p{2.5cm}p{1.5cm}p{6.5cm}}

hline

multicolumn{2}{c}{textbf{Parameters}}                       & multirow{2}{*}{textbf{Used value}} & multicolumn{1}{c}{multirow{2}{*}{textbf{Definition}}}                                                                                                                                 \

textbf{Original}             & textbf{English translation}  &                                      & multicolumn{1}{c}{}                                                                                                                                                                     \

hline

Rechenlauf fortsetzen         & raggedright Continue calculation          & No                     & Whether calculation run is to be continued. If yes, results from file texttt{HYDRO_AS 2D.CPR} are transferred to the program and used as initial condition. \

Simulationszeit {[}s{]}       & Simulation time {[}s{]}       & 86400                                & Simulation time (in seconds)                                                                                                                                                \

Zeitintervall SMS {[}s{]}     & Time interval SMS {[}s{]}     & 8640                                 & Time interval (in seconds) for storage of area-based results which can subsequently be visualized with the SMS program.                             \

Zeitintervall Q_Strg {[}s{]} & Time interval Q_Strg {[}s{]} & 900                                  & Time interval (in seconds) for which  data of the node strings are written to texttt{Q_Strg.dat}.                                                                         \

Hmin                          & multirow{5}{*}{}             & 0.01 m                               & Minimum water depth                                                                                                                                                                      \

VELMAX                        &                               & 15 m/s                               & Maximum velocity                                                                                                                                                                  \

Amin                          &                               & 1.e-15 mtextsuperscript{2}          & Minimum element size for calculating internal calculation time step                                                                                                          \

CMUVISC                       &                               & 0.60                                 & Coefficient cm in  viscosity formula                                                                                                                                                  \

SCF                           &                               & 1.00                                 & Coefficient for  additional acceleration of  calculation process       \

hline                                                                                                           

end{tabular}

end{table}

Output

Can you think of a method for reducing the sizable inter-word gaps in the second column? — Nov 13 at 15:38
@Mico more raggedrights will do it -- I'll expand the answer. I prefer to use it locally so I can apply my own judgement as to which cells need it (rather than figuring out a way of making a column ragged -- another question) — Nov 13 at 15:45

搜尋此網誌

Jtdylktuy

Any ideas on how this table could be made better looking?

3 Answers
3

Your Answer

Post as a guest

3 Answers
3

3 Answers
3

Post as a guest

Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Aardman Animations

Are they similar matrix

Any ideas on how this table could be made better looking?

3 Answers 3

Your Answer

Sign up or log in

Post as a guest

Post as a guest

3 Answers 3

3 Answers 3

Sign up or log in

Post as a guest

Post as a guest

Sign up or log in

Post as a guest

Sign up or log in

Post as a guest

Sign up or log in

Post as a guest

Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Aardman Animations

Are they similar matrix

3 Answers
3

3 Answers
3

3 Answers
3