iPad USB Charging Utility for Dell Optiplex












1















As you probably know already, an iPad requires a certain power on USB port to be charged from.
Thus, some motherboard manufacturers (such as ASUS, Gigabyte etc) had released a special driver that recognizes that an iPad is connected to the port and adjust the USB power accordingly.



On one of my computers (Gigabyte motherboard) it works fine. But other one is Dell Optiplex 780 and the regular googling by "<motherboard type> + iPad charging" doesn't seem to bring encouraging results.



Just for completeness: no, the iPad is not being charged without any special driver installed (out of the box) either.



Any suggestions will be welcomed.










share|improve this question

























  • How can you adjust the USB power?

    – pavium
    Jun 19 '11 at 12:26











  • @pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

    – BreakPhreak
    Jun 19 '11 at 12:32











  • This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

    – pavium
    Jun 19 '11 at 12:37













  • The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

    – Simon Sheehan
    Jun 19 '11 at 12:51











  • I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

    – BreakPhreak
    Jun 19 '11 at 12:56
















1















As you probably know already, an iPad requires a certain power on USB port to be charged from.
Thus, some motherboard manufacturers (such as ASUS, Gigabyte etc) had released a special driver that recognizes that an iPad is connected to the port and adjust the USB power accordingly.



On one of my computers (Gigabyte motherboard) it works fine. But other one is Dell Optiplex 780 and the regular googling by "<motherboard type> + iPad charging" doesn't seem to bring encouraging results.



Just for completeness: no, the iPad is not being charged without any special driver installed (out of the box) either.



Any suggestions will be welcomed.










share|improve this question

























  • How can you adjust the USB power?

    – pavium
    Jun 19 '11 at 12:26











  • @pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

    – BreakPhreak
    Jun 19 '11 at 12:32











  • This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

    – pavium
    Jun 19 '11 at 12:37













  • The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

    – Simon Sheehan
    Jun 19 '11 at 12:51











  • I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

    – BreakPhreak
    Jun 19 '11 at 12:56














1












1








1








As you probably know already, an iPad requires a certain power on USB port to be charged from.
Thus, some motherboard manufacturers (such as ASUS, Gigabyte etc) had released a special driver that recognizes that an iPad is connected to the port and adjust the USB power accordingly.



On one of my computers (Gigabyte motherboard) it works fine. But other one is Dell Optiplex 780 and the regular googling by "<motherboard type> + iPad charging" doesn't seem to bring encouraging results.



Just for completeness: no, the iPad is not being charged without any special driver installed (out of the box) either.



Any suggestions will be welcomed.










share|improve this question
















As you probably know already, an iPad requires a certain power on USB port to be charged from.
Thus, some motherboard manufacturers (such as ASUS, Gigabyte etc) had released a special driver that recognizes that an iPad is connected to the port and adjust the USB power accordingly.



On one of my computers (Gigabyte motherboard) it works fine. But other one is Dell Optiplex 780 and the regular googling by "<motherboard type> + iPad charging" doesn't seem to bring encouraging results.



Just for completeness: no, the iPad is not being charged without any special driver installed (out of the box) either.



Any suggestions will be welcomed.







usb ipad dell-optiplex






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 8 '16 at 14:10









Hennes

59.2k792142




59.2k792142










asked Jun 19 '11 at 12:06









BreakPhreakBreakPhreak

50531019




50531019













  • How can you adjust the USB power?

    – pavium
    Jun 19 '11 at 12:26











  • @pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

    – BreakPhreak
    Jun 19 '11 at 12:32











  • This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

    – pavium
    Jun 19 '11 at 12:37













  • The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

    – Simon Sheehan
    Jun 19 '11 at 12:51











  • I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

    – BreakPhreak
    Jun 19 '11 at 12:56



















  • How can you adjust the USB power?

    – pavium
    Jun 19 '11 at 12:26











  • @pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

    – BreakPhreak
    Jun 19 '11 at 12:32











  • This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

    – pavium
    Jun 19 '11 at 12:37













  • The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

    – Simon Sheehan
    Jun 19 '11 at 12:51











  • I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

    – BreakPhreak
    Jun 19 '11 at 12:56

















How can you adjust the USB power?

– pavium
Jun 19 '11 at 12:26





How can you adjust the USB power?

– pavium
Jun 19 '11 at 12:26













@pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

– BreakPhreak
Jun 19 '11 at 12:32





@pavium: gigabyte.com/microsite/185/on-off-charge.htm - just an example.

– BreakPhreak
Jun 19 '11 at 12:32













This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

– pavium
Jun 19 '11 at 12:37







This looks like marketing hype. The USB standard requires USB ports provide a fixed voltage of 5V. How could a driver change either the voltage or the current compliance? If the voltage is fixed (as it must be) the speed of charging is determined by the device being charged.

– pavium
Jun 19 '11 at 12:37















The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

– Simon Sheehan
Jun 19 '11 at 12:51





The comment above is correct. You MAY need to install iTunes to get the iPodSupport files to recognize it

– Simon Sheehan
Jun 19 '11 at 12:51













I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

– BreakPhreak
Jun 19 '11 at 12:56





I am sorry, this has nothing to do with iTunes and also nothing about file recognition. On my home computer (with Gigabye motherboard), I have no iTunes installed and iPad charging started to work only after I've installed the driver, mentioned above. Not sure how power is measured, I think it's rather about a current: 2amper vs. 0.5amper, but I might be wrong.

– BreakPhreak
Jun 19 '11 at 12:56










2 Answers
2






active

oldest

votes


















1














Its a hardware issue,



"GIGABYTE's latest motherboards are equipped with ON/OFF Charge technology"



If it is not incorporated into the motherboard, then no driver can modify the USB chip and circuitry on a standard motherboard. Obviously your Dell does not have this motherboard feature.



Standard USB is 500 milliamps, no way to upgrade this to 2 amps with a driver, you need a special USB chip/circuit on the motherboard to do this.






share|improve this answer
























  • I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

    – BreakPhreak
    Jun 20 '11 at 8:00








  • 1





    If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

    – Moab
    Jun 20 '11 at 15:23











  • Ah... completely understood now. Thanks.

    – BreakPhreak
    Jun 21 '11 at 11:18



















0














My Dell XPS 8300 is in no way anounced to be able to charge iPad by USB when using it at the same time, and it doesn't with default drivers.



CPU-Z tells me the motherboard is




  • Manufacturer: Dell Inc.

  • Model: 0Y2MRG A00

  • Chipset: Intel, Sandy Bridge, Rev. 09

  • Southbridge: Intel, H67, Rev. B3

  • LPCIO: ITE, IT8772


BIOS




  • Brand: Dell Inc.

  • Version: A06 (updated by Dell driver download)

  • Date: 10/07/2011


...but, installing Asus AI Charger, I'm completely able to charge it at the same time that I use it. Give it a try, download it from:




  • http://event.asus.com/mb/2010/ai_charger/


I've also tried first to install Gigabyte On/Off driver, it gives no error, but doesn't have any effect, so i uninstalled it.






share|improve this answer























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "3"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f299210%2fipad-usb-charging-utility-for-dell-optiplex%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    1














    Its a hardware issue,



    "GIGABYTE's latest motherboards are equipped with ON/OFF Charge technology"



    If it is not incorporated into the motherboard, then no driver can modify the USB chip and circuitry on a standard motherboard. Obviously your Dell does not have this motherboard feature.



    Standard USB is 500 milliamps, no way to upgrade this to 2 amps with a driver, you need a special USB chip/circuit on the motherboard to do this.






    share|improve this answer
























    • I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

      – BreakPhreak
      Jun 20 '11 at 8:00








    • 1





      If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

      – Moab
      Jun 20 '11 at 15:23











    • Ah... completely understood now. Thanks.

      – BreakPhreak
      Jun 21 '11 at 11:18
















    1














    Its a hardware issue,



    "GIGABYTE's latest motherboards are equipped with ON/OFF Charge technology"



    If it is not incorporated into the motherboard, then no driver can modify the USB chip and circuitry on a standard motherboard. Obviously your Dell does not have this motherboard feature.



    Standard USB is 500 milliamps, no way to upgrade this to 2 amps with a driver, you need a special USB chip/circuit on the motherboard to do this.






    share|improve this answer
























    • I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

      – BreakPhreak
      Jun 20 '11 at 8:00








    • 1





      If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

      – Moab
      Jun 20 '11 at 15:23











    • Ah... completely understood now. Thanks.

      – BreakPhreak
      Jun 21 '11 at 11:18














    1












    1








    1







    Its a hardware issue,



    "GIGABYTE's latest motherboards are equipped with ON/OFF Charge technology"



    If it is not incorporated into the motherboard, then no driver can modify the USB chip and circuitry on a standard motherboard. Obviously your Dell does not have this motherboard feature.



    Standard USB is 500 milliamps, no way to upgrade this to 2 amps with a driver, you need a special USB chip/circuit on the motherboard to do this.






    share|improve this answer













    Its a hardware issue,



    "GIGABYTE's latest motherboards are equipped with ON/OFF Charge technology"



    If it is not incorporated into the motherboard, then no driver can modify the USB chip and circuitry on a standard motherboard. Obviously your Dell does not have this motherboard feature.



    Standard USB is 500 milliamps, no way to upgrade this to 2 amps with a driver, you need a special USB chip/circuit on the motherboard to do this.







    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered Jun 19 '11 at 16:04









    MoabMoab

    51.3k1494160




    51.3k1494160













    • I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

      – BreakPhreak
      Jun 20 '11 at 8:00








    • 1





      If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

      – Moab
      Jun 20 '11 at 15:23











    • Ah... completely understood now. Thanks.

      – BreakPhreak
      Jun 21 '11 at 11:18



















    • I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

      – BreakPhreak
      Jun 20 '11 at 8:00








    • 1





      If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

      – Moab
      Jun 20 '11 at 15:23











    • Ah... completely understood now. Thanks.

      – BreakPhreak
      Jun 21 '11 at 11:18

















    I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

    – BreakPhreak
    Jun 20 '11 at 8:00







    I know it is a hardware issue. I was trying to understand IF my Dell Optiplex 780 motherboard supports such a functionality. I just can't get which motherboard is it. You say that it is obvious that my dell does not have it. Assumed it comes from your common knowledge. Just re-assuring/re-validating.

    – BreakPhreak
    Jun 20 '11 at 8:00






    1




    1





    If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

    – Moab
    Jun 20 '11 at 15:23





    If Dell supported this feature, they would advertise it like crazy, yes obvious to me, maybe not you. I doubt they ever will since Apple is a direct competitor.

    – Moab
    Jun 20 '11 at 15:23













    Ah... completely understood now. Thanks.

    – BreakPhreak
    Jun 21 '11 at 11:18





    Ah... completely understood now. Thanks.

    – BreakPhreak
    Jun 21 '11 at 11:18













    0














    My Dell XPS 8300 is in no way anounced to be able to charge iPad by USB when using it at the same time, and it doesn't with default drivers.



    CPU-Z tells me the motherboard is




    • Manufacturer: Dell Inc.

    • Model: 0Y2MRG A00

    • Chipset: Intel, Sandy Bridge, Rev. 09

    • Southbridge: Intel, H67, Rev. B3

    • LPCIO: ITE, IT8772


    BIOS




    • Brand: Dell Inc.

    • Version: A06 (updated by Dell driver download)

    • Date: 10/07/2011


    ...but, installing Asus AI Charger, I'm completely able to charge it at the same time that I use it. Give it a try, download it from:




    • http://event.asus.com/mb/2010/ai_charger/


    I've also tried first to install Gigabyte On/Off driver, it gives no error, but doesn't have any effect, so i uninstalled it.






    share|improve this answer




























      0














      My Dell XPS 8300 is in no way anounced to be able to charge iPad by USB when using it at the same time, and it doesn't with default drivers.



      CPU-Z tells me the motherboard is




      • Manufacturer: Dell Inc.

      • Model: 0Y2MRG A00

      • Chipset: Intel, Sandy Bridge, Rev. 09

      • Southbridge: Intel, H67, Rev. B3

      • LPCIO: ITE, IT8772


      BIOS




      • Brand: Dell Inc.

      • Version: A06 (updated by Dell driver download)

      • Date: 10/07/2011


      ...but, installing Asus AI Charger, I'm completely able to charge it at the same time that I use it. Give it a try, download it from:




      • http://event.asus.com/mb/2010/ai_charger/


      I've also tried first to install Gigabyte On/Off driver, it gives no error, but doesn't have any effect, so i uninstalled it.






      share|improve this answer


























        0












        0








        0







        My Dell XPS 8300 is in no way anounced to be able to charge iPad by USB when using it at the same time, and it doesn't with default drivers.



        CPU-Z tells me the motherboard is




        • Manufacturer: Dell Inc.

        • Model: 0Y2MRG A00

        • Chipset: Intel, Sandy Bridge, Rev. 09

        • Southbridge: Intel, H67, Rev. B3

        • LPCIO: ITE, IT8772


        BIOS




        • Brand: Dell Inc.

        • Version: A06 (updated by Dell driver download)

        • Date: 10/07/2011


        ...but, installing Asus AI Charger, I'm completely able to charge it at the same time that I use it. Give it a try, download it from:




        • http://event.asus.com/mb/2010/ai_charger/


        I've also tried first to install Gigabyte On/Off driver, it gives no error, but doesn't have any effect, so i uninstalled it.






        share|improve this answer













        My Dell XPS 8300 is in no way anounced to be able to charge iPad by USB when using it at the same time, and it doesn't with default drivers.



        CPU-Z tells me the motherboard is




        • Manufacturer: Dell Inc.

        • Model: 0Y2MRG A00

        • Chipset: Intel, Sandy Bridge, Rev. 09

        • Southbridge: Intel, H67, Rev. B3

        • LPCIO: ITE, IT8772


        BIOS




        • Brand: Dell Inc.

        • Version: A06 (updated by Dell driver download)

        • Date: 10/07/2011


        ...but, installing Asus AI Charger, I'm completely able to charge it at the same time that I use it. Give it a try, download it from:




        • http://event.asus.com/mb/2010/ai_charger/


        I've also tried first to install Gigabyte On/Off driver, it gives no error, but doesn't have any effect, so i uninstalled it.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Nov 26 '12 at 22:27









        vicenteherreravicenteherrera

        1856




        1856






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Super User!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f299210%2fipad-usb-charging-utility-for-dell-optiplex%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            Probability when a professor distributes a quiz and homework assignment to a class of n students.

            Aardman Animations

            Are they similar matrix