MIME Not Supported Error on Webpage
I have a strange issue on some but not all machines I am currently deploying across a large network. All are the same base image except some have obviously had things installed since this has come to light.
The error itself is MIME_TYPE_NOT_SUPPORTED with no other information (as below)
I have tried to troubleshoot this in two ways, using Fiddler to track all HTTP traffic from a working PC and a none working but unable to see the 'troublesome' part of the site. I have also compared the MIME registry database list from both machines but no differences except one program which I have installed but did not help the problem.
Any other way I can troubleshoot this further?
The link is:
https://paymentservices.bacs.co.uk/online/newbacs/loginBrowser.do
webpage mime-types mime-headers
add a comment |
I have a strange issue on some but not all machines I am currently deploying across a large network. All are the same base image except some have obviously had things installed since this has come to light.
The error itself is MIME_TYPE_NOT_SUPPORTED with no other information (as below)
I have tried to troubleshoot this in two ways, using Fiddler to track all HTTP traffic from a working PC and a none working but unable to see the 'troublesome' part of the site. I have also compared the MIME registry database list from both machines but no differences except one program which I have installed but did not help the problem.
Any other way I can troubleshoot this further?
The link is:
https://paymentservices.bacs.co.uk/online/newbacs/loginBrowser.do
webpage mime-types mime-headers
add a comment |
I have a strange issue on some but not all machines I am currently deploying across a large network. All are the same base image except some have obviously had things installed since this has come to light.
The error itself is MIME_TYPE_NOT_SUPPORTED with no other information (as below)
I have tried to troubleshoot this in two ways, using Fiddler to track all HTTP traffic from a working PC and a none working but unable to see the 'troublesome' part of the site. I have also compared the MIME registry database list from both machines but no differences except one program which I have installed but did not help the problem.
Any other way I can troubleshoot this further?
The link is:
https://paymentservices.bacs.co.uk/online/newbacs/loginBrowser.do
webpage mime-types mime-headers
I have a strange issue on some but not all machines I am currently deploying across a large network. All are the same base image except some have obviously had things installed since this has come to light.
The error itself is MIME_TYPE_NOT_SUPPORTED with no other information (as below)
I have tried to troubleshoot this in two ways, using Fiddler to track all HTTP traffic from a working PC and a none working but unable to see the 'troublesome' part of the site. I have also compared the MIME registry database list from both machines but no differences except one program which I have installed but did not help the problem.
Any other way I can troubleshoot this further?
The link is:
https://paymentservices.bacs.co.uk/online/newbacs/loginBrowser.do
webpage mime-types mime-headers
webpage mime-types mime-headers
asked Oct 15 '14 at 10:11
CharlesHCharlesH
1,8932817
1,8932817
add a comment |
add a comment |
4 Answers
4
active
oldest
votes
I Spoke to my Bacs provider (Barclays) They sent me new software version 4.4 to install... if you have other bacs provider software on there E.G Bottomline you have to tell them and they will send different software to by an email link and this corrects the problem. took 5 mins to sort hope this helps.
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
add a comment |
I had a user experience the same issue using eSigner version 4.4. Poking around for some differences between the 4.4 install and a 4.2 install that worked on another machine, I found that the config.reg file from the 4.2 install had the following entry that was not present in the local.conf on the 4.4 install:
"ISPI.mode.support"=dword:00000001
I added this to local.conf and it now works.
Some results from google appear to imply that this setting is to do with browser plugins, so this change would seem to make sense.
This fixed it for us, too. Thanks! For posterity, our path/version wasC:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
add a comment |
Check the version you are using and ask your bank if its the right version - just had this problem and Barclays had sent us the wrong version - we were using 6421 corporate and getting the same error message - we contacted BACS and they told us ask Barclays about the version - removed the corp version installed 6421 IS and now working fine
add a comment |
What worked for me was going to Control Panel and change it to Always Allow JNPL File/MIME Association in JAVA, Advanced Tab.
add a comment |
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f826585%2fmime-not-supported-error-on-webpage%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
I Spoke to my Bacs provider (Barclays) They sent me new software version 4.4 to install... if you have other bacs provider software on there E.G Bottomline you have to tell them and they will send different software to by an email link and this corrects the problem. took 5 mins to sort hope this helps.
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
add a comment |
I Spoke to my Bacs provider (Barclays) They sent me new software version 4.4 to install... if you have other bacs provider software on there E.G Bottomline you have to tell them and they will send different software to by an email link and this corrects the problem. took 5 mins to sort hope this helps.
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
add a comment |
I Spoke to my Bacs provider (Barclays) They sent me new software version 4.4 to install... if you have other bacs provider software on there E.G Bottomline you have to tell them and they will send different software to by an email link and this corrects the problem. took 5 mins to sort hope this helps.
I Spoke to my Bacs provider (Barclays) They sent me new software version 4.4 to install... if you have other bacs provider software on there E.G Bottomline you have to tell them and they will send different software to by an email link and this corrects the problem. took 5 mins to sort hope this helps.
answered May 7 '15 at 13:54
Nick JamesNick James
363
363
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
add a comment |
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
Thanks Nick, to be honest I forgot about this post as we did fix the issue by installing another version of the software however I believe we went back down to 4.0 from 4.2 maybe (was a little while ago now). But yes looks like one of the versions is a bit buggy.
– CharlesH
May 8 '15 at 7:16
add a comment |
I had a user experience the same issue using eSigner version 4.4. Poking around for some differences between the 4.4 install and a 4.2 install that worked on another machine, I found that the config.reg file from the 4.2 install had the following entry that was not present in the local.conf on the 4.4 install:
"ISPI.mode.support"=dword:00000001
I added this to local.conf and it now works.
Some results from google appear to imply that this setting is to do with browser plugins, so this change would seem to make sense.
This fixed it for us, too. Thanks! For posterity, our path/version wasC:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
add a comment |
I had a user experience the same issue using eSigner version 4.4. Poking around for some differences between the 4.4 install and a 4.2 install that worked on another machine, I found that the config.reg file from the 4.2 install had the following entry that was not present in the local.conf on the 4.4 install:
"ISPI.mode.support"=dword:00000001
I added this to local.conf and it now works.
Some results from google appear to imply that this setting is to do with browser plugins, so this change would seem to make sense.
This fixed it for us, too. Thanks! For posterity, our path/version wasC:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
add a comment |
I had a user experience the same issue using eSigner version 4.4. Poking around for some differences between the 4.4 install and a 4.2 install that worked on another machine, I found that the config.reg file from the 4.2 install had the following entry that was not present in the local.conf on the 4.4 install:
"ISPI.mode.support"=dword:00000001
I added this to local.conf and it now works.
Some results from google appear to imply that this setting is to do with browser plugins, so this change would seem to make sense.
I had a user experience the same issue using eSigner version 4.4. Poking around for some differences between the 4.4 install and a 4.2 install that worked on another machine, I found that the config.reg file from the 4.2 install had the following entry that was not present in the local.conf on the 4.4 install:
"ISPI.mode.support"=dword:00000001
I added this to local.conf and it now works.
Some results from google appear to imply that this setting is to do with browser plugins, so this change would seem to make sense.
answered Mar 3 '17 at 10:07
DougDoug
111
111
This fixed it for us, too. Thanks! For posterity, our path/version wasC:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
add a comment |
This fixed it for us, too. Thanks! For posterity, our path/version wasC:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
This fixed it for us, too. Thanks! For posterity, our path/version was
C:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
This fixed it for us, too. Thanks! For posterity, our path/version was
C:Program Files (x86)GemaltoeSigner6pluginlocal.conf
– underscore_d
Jan 29 '18 at 10:11
add a comment |
Check the version you are using and ask your bank if its the right version - just had this problem and Barclays had sent us the wrong version - we were using 6421 corporate and getting the same error message - we contacted BACS and they told us ask Barclays about the version - removed the corp version installed 6421 IS and now working fine
add a comment |
Check the version you are using and ask your bank if its the right version - just had this problem and Barclays had sent us the wrong version - we were using 6421 corporate and getting the same error message - we contacted BACS and they told us ask Barclays about the version - removed the corp version installed 6421 IS and now working fine
add a comment |
Check the version you are using and ask your bank if its the right version - just had this problem and Barclays had sent us the wrong version - we were using 6421 corporate and getting the same error message - we contacted BACS and they told us ask Barclays about the version - removed the corp version installed 6421 IS and now working fine
Check the version you are using and ask your bank if its the right version - just had this problem and Barclays had sent us the wrong version - we were using 6421 corporate and getting the same error message - we contacted BACS and they told us ask Barclays about the version - removed the corp version installed 6421 IS and now working fine
answered Feb 21 '18 at 15:37
Gary GreenwoodGary Greenwood
1
1
add a comment |
add a comment |
What worked for me was going to Control Panel and change it to Always Allow JNPL File/MIME Association in JAVA, Advanced Tab.
add a comment |
What worked for me was going to Control Panel and change it to Always Allow JNPL File/MIME Association in JAVA, Advanced Tab.
add a comment |
What worked for me was going to Control Panel and change it to Always Allow JNPL File/MIME Association in JAVA, Advanced Tab.
What worked for me was going to Control Panel and change it to Always Allow JNPL File/MIME Association in JAVA, Advanced Tab.
answered Feb 27 at 16:48
AguiAgui
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f826585%2fmime-not-supported-error-on-webpage%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown