Why were the Voyager spacecraft numbered “out-of-order”?
up vote
41
down vote
favorite
Voyager 2 was launched on August 20, 1977. Sixteen days later, Voyager 1 was launched on September 5, 1977.
Why was the first spacecraft numbered #2 and the second spacecraft numbered #1?
Clarification: One would expect that the first spacecraft to be manufactured would be the first ready for launch. Since that didn't happen, there is more to the story, and that is what this question is about.
voyager
asked 2 days ago
Dr Sheldon
2,109832
|
show 3 more comments
up vote
41
down vote
favorite
Voyager 2 was launched on August 20, 1977. Sixteen days later, Voyager 1 was launched on September 5, 1977.
Why was the first spacecraft numbered #2 and the second spacecraft numbered #1?
Clarification: One would expect that the first spacecraft to be manufactured would be the first ready for launch. Since that didn't happen, there is more to the story, and that is what this question is about.
voyager
asked 2 days ago
Dr Sheldon
2,109832
2
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
2
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
1
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
1
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
4
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday
|
show 3 more comments
up vote
41
down vote
favorite
up vote
41
down vote
favorite
Voyager 2 was launched on August 20, 1977. Sixteen days later, Voyager 1 was launched on September 5, 1977.
Why was the first spacecraft numbered #2 and the second spacecraft numbered #1?
Clarification: One would expect that the first spacecraft to be manufactured would be the first ready for launch. Since that didn't happen, there is more to the story, and that is what this question is about.
voyager
asked 2 days ago
Dr Sheldon
2,109832
Voyager 2 was launched on August 20, 1977. Sixteen days later, Voyager 1 was launched on September 5, 1977.
Why was the first spacecraft numbered #2 and the second spacecraft numbered #1?
Clarification: One would expect that the first spacecraft to be manufactured would be the first ready for launch. Since that didn't happen, there is more to the story, and that is what this question is about.
voyager
voyager
asked 2 days ago
Dr Sheldon
2,109832
asked 2 days ago
Dr Sheldon
2,109832
edited 2 days ago
asked 2 days ago
Dr Sheldon
2,109832
asked 2 days ago
Dr Sheldon
2,109832
asked 2 days ago
Dr Sheldon
2,109832
2,109832
2
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
2
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
1
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
1
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
4
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday
|
show 3 more comments
2
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
2
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
1
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
1
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
4
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday
2
2
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
2
2
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
1
1
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
1
1
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
4
4
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday
|
show 3 more comments
1 Answer
1
active
oldest
votes
up vote
66
down vote
accepted
Voyager 1 was the first to reach Jupiter and the first to reach Saturn, as it was launched on a "shorter and faster trajectory" (Wikipedia, NASA). So the numbering was chosen to reflect the order of the main part of the mission, not the launches.
I have not found any sources explicitly stating that as the reason, but the arrivals at Jupiter and Saturn received much more publicity than the launches, and at the time it certainly seemed natural that the first Voyager mission to reach Jupiter would be Voyager 1.
In Exploring Space by William E. Burrows, there is the following footnote:
Three weeks before the scheduled launch, the spacecraft that was
originally to be Voyager 2 developed mechanical problems. As a result,
a "spare" that actually carried the designation Voyager 3 became
Voyager 2. Once repaired, the original Voyager 2 was made Voyager 1.
The original voyager 1 was shipped back to JPL.
This at least shows that the naming had nothing to do when when each piece of hardware became available, since they renamed the hardware when they had to swap it out.
A reference to a NASA memo or even contemporaneous media coverage specifically supporting this reason would be a better answer, but this is what I have.
answered 2 days ago
Mark Foskey
1,313613
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
66
down vote
accepted
Voyager 1 was the first to reach Jupiter and the first to reach Saturn, as it was launched on a "shorter and faster trajectory" (Wikipedia, NASA). So the numbering was chosen to reflect the order of the main part of the mission, not the launches.
I have not found any sources explicitly stating that as the reason, but the arrivals at Jupiter and Saturn received much more publicity than the launches, and at the time it certainly seemed natural that the first Voyager mission to reach Jupiter would be Voyager 1.
In Exploring Space by William E. Burrows, there is the following footnote:
Three weeks before the scheduled launch, the spacecraft that was
originally to be Voyager 2 developed mechanical problems. As a result,
a "spare" that actually carried the designation Voyager 3 became
Voyager 2. Once repaired, the original Voyager 2 was made Voyager 1.
The original voyager 1 was shipped back to JPL.
This at least shows that the naming had nothing to do when when each piece of hardware became available, since they renamed the hardware when they had to swap it out.
A reference to a NASA memo or even contemporaneous media coverage specifically supporting this reason would be a better answer, but this is what I have.
answered 2 days ago
Mark Foskey
1,313613
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
add a comment |
up vote
66
down vote
accepted
Voyager 1 was the first to reach Jupiter and the first to reach Saturn, as it was launched on a "shorter and faster trajectory" (Wikipedia, NASA). So the numbering was chosen to reflect the order of the main part of the mission, not the launches.
I have not found any sources explicitly stating that as the reason, but the arrivals at Jupiter and Saturn received much more publicity than the launches, and at the time it certainly seemed natural that the first Voyager mission to reach Jupiter would be Voyager 1.
In Exploring Space by William E. Burrows, there is the following footnote:
Three weeks before the scheduled launch, the spacecraft that was
originally to be Voyager 2 developed mechanical problems. As a result,
a "spare" that actually carried the designation Voyager 3 became
Voyager 2. Once repaired, the original Voyager 2 was made Voyager 1.
The original voyager 1 was shipped back to JPL.
This at least shows that the naming had nothing to do when when each piece of hardware became available, since they renamed the hardware when they had to swap it out.
A reference to a NASA memo or even contemporaneous media coverage specifically supporting this reason would be a better answer, but this is what I have.
answered 2 days ago
Mark Foskey
1,313613
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
add a comment |
up vote
66
down vote
accepted
up vote
66
down vote
accepted
Voyager 1 was the first to reach Jupiter and the first to reach Saturn, as it was launched on a "shorter and faster trajectory" (Wikipedia, NASA). So the numbering was chosen to reflect the order of the main part of the mission, not the launches.
I have not found any sources explicitly stating that as the reason, but the arrivals at Jupiter and Saturn received much more publicity than the launches, and at the time it certainly seemed natural that the first Voyager mission to reach Jupiter would be Voyager 1.
In Exploring Space by William E. Burrows, there is the following footnote:
Three weeks before the scheduled launch, the spacecraft that was
originally to be Voyager 2 developed mechanical problems. As a result,
a "spare" that actually carried the designation Voyager 3 became
Voyager 2. Once repaired, the original Voyager 2 was made Voyager 1.
The original voyager 1 was shipped back to JPL.
This at least shows that the naming had nothing to do when when each piece of hardware became available, since they renamed the hardware when they had to swap it out.
A reference to a NASA memo or even contemporaneous media coverage specifically supporting this reason would be a better answer, but this is what I have.
answered 2 days ago
Mark Foskey
1,313613
Voyager 1 was the first to reach Jupiter and the first to reach Saturn, as it was launched on a "shorter and faster trajectory" (Wikipedia, NASA). So the numbering was chosen to reflect the order of the main part of the mission, not the launches.
I have not found any sources explicitly stating that as the reason, but the arrivals at Jupiter and Saturn received much more publicity than the launches, and at the time it certainly seemed natural that the first Voyager mission to reach Jupiter would be Voyager 1.
In Exploring Space by William E. Burrows, there is the following footnote:
Three weeks before the scheduled launch, the spacecraft that was
originally to be Voyager 2 developed mechanical problems. As a result,
a "spare" that actually carried the designation Voyager 3 became
Voyager 2. Once repaired, the original Voyager 2 was made Voyager 1.
The original voyager 1 was shipped back to JPL.
This at least shows that the naming had nothing to do when when each piece of hardware became available, since they renamed the hardware when they had to swap it out.
A reference to a NASA memo or even contemporaneous media coverage specifically supporting this reason would be a better answer, but this is what I have.
answered 2 days ago
Mark Foskey
1,313613
edited 2 days ago
answered 2 days ago
Mark Foskey
1,313613
answered 2 days ago
Mark Foskey
1,313613
answered 2 days ago
Mark Foskey
1,313613
1,313613
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
add a comment |
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
3
3
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
It's not from a contemporaneous source, but here's something from NASA's Voyager mission page stating this is the reason: nasa.gov/mission_pages/voyager/multimedia/pia01480.html
– Elezar
2 days ago
1
1
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
This is correct. This is also covered in The Interstellar Age: Inside the Forty-Year Voyager Mission by Jim Bell.
– Brian Rogers
2 days ago
1
1
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
The original Voyager 1 remains on display today in the von Karman auditorium at JPL.
– Mark Adler
yesterday
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f31969%2fwhy-were-the-voyager-spacecraft-numbered-out-of-order%23new-answer', 'question_page');
}
);
Post as a guest
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
2
That still doesn't explain why #2 was launched first.
– Dr Sheldon
2 days ago
2
Voyager 1 was started later but used a faster trajectory. From wikipedia "On November 7, 2012, Voyager 2 reached 100 AU from the sun, making it the third human-made object to reach 100 AU. Voyager 1 was 122 AU from the Sun" , "In 2013 Voyager 1 was escaping the solar system at a speed of about 3.6 AU per year, while Voyager 2 was only escaping at 3.3 AU per year.[41] (Each year Voyager 1 increases its lead over Voyager 2) ".
– Uwe
2 days ago
1
There is a very good documentary on the Voyager spacecraft called "The Farthest" available on Netflix. I watched it a few nights ago and the numbering was explained there as well.
– James
2 days ago
1
While I don't know for sure, I would think that something like the Voyagers would be built in parallel, rather than one after the other.
– jamesqf
2 days ago
4
On MER we numbered the builds, but used letters for the launches. So MER-1 was built before MER-2. MER-A would both launch and arrive first, and MER-B would launch and arrive second. We weren't sure which hardware would launch first, and in fact due to how system testing on the two units was laid out, MER-2 became MER-A (Spirit), and MER-1 became MER-B (Opportunity).
– Mark Adler
yesterday