Confusion regarding exact type and voltage of my laptop RAM module for upgrade











up vote
0
down vote

favorite












I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.










share|improve this question







New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.




















  • Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
    – NoAngel
    Nov 15 at 10:05












  • Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
    – Bobby Sha
    Nov 15 at 14:34










  • MT means just Micron Technology. With or without MT it's the same thing.
    – NoAngel
    Nov 16 at 2:44















up vote
0
down vote

favorite












I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.










share|improve this question







New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.




















  • Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
    – NoAngel
    Nov 15 at 10:05












  • Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
    – Bobby Sha
    Nov 15 at 14:34










  • MT means just Micron Technology. With or without MT it's the same thing.
    – NoAngel
    Nov 16 at 2:44













up vote
0
down vote

favorite









up vote
0
down vote

favorite











I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.










share|improve this question







New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.







laptop memory






share|improve this question







New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked Nov 15 at 8:40









Bobby Sha

11




11




New contributor




Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Bobby Sha is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












  • Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
    – NoAngel
    Nov 15 at 10:05












  • Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
    – Bobby Sha
    Nov 15 at 14:34










  • MT means just Micron Technology. With or without MT it's the same thing.
    – NoAngel
    Nov 16 at 2:44


















  • Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
    – NoAngel
    Nov 15 at 10:05












  • Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
    – Bobby Sha
    Nov 15 at 14:34










  • MT means just Micron Technology. With or without MT it's the same thing.
    – NoAngel
    Nov 16 at 2:44
















Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05






Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05














Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34




Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34












MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44




MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44










1 Answer
1






active

oldest

votes

















up vote
0
down vote













Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.



To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.



Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.



All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.



Take this with a grain of salt and consider it suggestions and speculation.






share|improve this answer





















  • Thank you. My BIOS doesnt list RAM voltage.
    – Bobby Sha
    Nov 15 at 14:30










  • @BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
    – Ricardo S.
    Nov 15 at 14:35











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});






Bobby Sha is a new contributor. Be nice, and check out our Code of Conduct.










 

draft saved


draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1375588%2fconfusion-regarding-exact-type-and-voltage-of-my-laptop-ram-module-for-upgrade%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes








up vote
0
down vote













Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.



To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.



Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.



All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.



Take this with a grain of salt and consider it suggestions and speculation.






share|improve this answer





















  • Thank you. My BIOS doesnt list RAM voltage.
    – Bobby Sha
    Nov 15 at 14:30










  • @BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
    – Ricardo S.
    Nov 15 at 14:35















up vote
0
down vote













Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.



To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.



Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.



All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.



Take this with a grain of salt and consider it suggestions and speculation.






share|improve this answer





















  • Thank you. My BIOS doesnt list RAM voltage.
    – Bobby Sha
    Nov 15 at 14:30










  • @BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
    – Ricardo S.
    Nov 15 at 14:35













up vote
0
down vote










up vote
0
down vote









Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.



To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.



Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.



All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.



Take this with a grain of salt and consider it suggestions and speculation.






share|improve this answer












Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.



To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.



Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.



All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.



Take this with a grain of salt and consider it suggestions and speculation.







share|improve this answer












share|improve this answer



share|improve this answer










answered Nov 15 at 9:54









Ricardo S.

527




527












  • Thank you. My BIOS doesnt list RAM voltage.
    – Bobby Sha
    Nov 15 at 14:30










  • @BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
    – Ricardo S.
    Nov 15 at 14:35


















  • Thank you. My BIOS doesnt list RAM voltage.
    – Bobby Sha
    Nov 15 at 14:30










  • @BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
    – Ricardo S.
    Nov 15 at 14:35
















Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30




Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30












@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35




@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35










Bobby Sha is a new contributor. Be nice, and check out our Code of Conduct.










 

draft saved


draft discarded


















Bobby Sha is a new contributor. Be nice, and check out our Code of Conduct.













Bobby Sha is a new contributor. Be nice, and check out our Code of Conduct.












Bobby Sha is a new contributor. Be nice, and check out our Code of Conduct.















 


draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1375588%2fconfusion-regarding-exact-type-and-voltage-of-my-laptop-ram-module-for-upgrade%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Aardman Animations

Are they similar matrix