Fedora 19 (you have not created a bootloader stage 1 target device)
up vote
1
down vote
favorite
I want to install fedora 19 to my HDD but I get errors:
- you have not created a bootloader stage 1 target device
- sda6 must have one of the following disklabel types: GPT.
I tried:
- Create 1-2 mb BIOS boot partition. (does not work)
- Change UEFI to Legacy first in BIOS (USB does not boot)
- Delete
BOOTX64.efiin EFI folder in bootable USB (USB does not boot) - Use other USB creator - unebootin, lili usb, linux live usb creator (does not work)
Where is the problem? I've got Lenovo z500.
linux boot fedora uefi efi
edited Sep 8 '13 at 5:47
slm
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
add a comment |
up vote
1
down vote
favorite
I want to install fedora 19 to my HDD but I get errors:
- you have not created a bootloader stage 1 target device
- sda6 must have one of the following disklabel types: GPT.
I tried:
- Create 1-2 mb BIOS boot partition. (does not work)
- Change UEFI to Legacy first in BIOS (USB does not boot)
- Delete
BOOTX64.efiin EFI folder in bootable USB (USB does not boot) - Use other USB creator - unebootin, lili usb, linux live usb creator (does not work)
Where is the problem? I've got Lenovo z500.
linux boot fedora uefi efi
edited Sep 8 '13 at 5:47
slm
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I want to install fedora 19 to my HDD but I get errors:
- you have not created a bootloader stage 1 target device
- sda6 must have one of the following disklabel types: GPT.
I tried:
- Create 1-2 mb BIOS boot partition. (does not work)
- Change UEFI to Legacy first in BIOS (USB does not boot)
- Delete
BOOTX64.efiin EFI folder in bootable USB (USB does not boot) - Use other USB creator - unebootin, lili usb, linux live usb creator (does not work)
Where is the problem? I've got Lenovo z500.
linux boot fedora uefi efi
edited Sep 8 '13 at 5:47
slm
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
I want to install fedora 19 to my HDD but I get errors:
- you have not created a bootloader stage 1 target device
- sda6 must have one of the following disklabel types: GPT.
I tried:
- Create 1-2 mb BIOS boot partition. (does not work)
- Change UEFI to Legacy first in BIOS (USB does not boot)
- Delete
BOOTX64.efiin EFI folder in bootable USB (USB does not boot) - Use other USB creator - unebootin, lili usb, linux live usb creator (does not work)
Where is the problem? I've got Lenovo z500.
linux boot fedora uefi efi
linux boot fedora uefi efi
edited Sep 8 '13 at 5:47
slm
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
edited Sep 8 '13 at 5:47
slm
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
edited Sep 8 '13 at 5:47
slm
6,12053745
edited Sep 8 '13 at 5:47
slm
6,12053745
edited Sep 8 '13 at 5:47
slm
6,12053745
6,12053745
asked Sep 7 '13 at 16:49
Fakt7
612
asked Sep 7 '13 at 16:49
Fakt7
612
asked Sep 7 '13 at 16:49
Fakt7
612
612
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
My suspicion is that you've booted the installer in EFI mode, which requires an EFI System Partition (ESP) to be bootable. If you're partitioning manually, you should be sure to create the ESP, which is a FAT32 partition with a type code of EF00 (in gdisk, sgdisk, or cgdisk) or that has its "boot flag" set (in parted, GParted, or most other libparted-based tools). You may also need to flag the ESP as such in Anaconda, but I don't recall the details of how to do that in Anaconda's user interface. You'll need to undo the things you said you tried (except for creating a BIOS Boot Partition; that's harmless, except for the waste of disk space it represents).
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
My suspicion is that you've booted the installer in EFI mode, which requires an EFI System Partition (ESP) to be bootable. If you're partitioning manually, you should be sure to create the ESP, which is a FAT32 partition with a type code of EF00 (in gdisk, sgdisk, or cgdisk) or that has its "boot flag" set (in parted, GParted, or most other libparted-based tools). You may also need to flag the ESP as such in Anaconda, but I don't recall the details of how to do that in Anaconda's user interface. You'll need to undo the things you said you tried (except for creating a BIOS Boot Partition; that's harmless, except for the waste of disk space it represents).
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
add a comment |
up vote
0
down vote
My suspicion is that you've booted the installer in EFI mode, which requires an EFI System Partition (ESP) to be bootable. If you're partitioning manually, you should be sure to create the ESP, which is a FAT32 partition with a type code of EF00 (in gdisk, sgdisk, or cgdisk) or that has its "boot flag" set (in parted, GParted, or most other libparted-based tools). You may also need to flag the ESP as such in Anaconda, but I don't recall the details of how to do that in Anaconda's user interface. You'll need to undo the things you said you tried (except for creating a BIOS Boot Partition; that's harmless, except for the waste of disk space it represents).
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
add a comment |
up vote
0
down vote
up vote
0
down vote
My suspicion is that you've booted the installer in EFI mode, which requires an EFI System Partition (ESP) to be bootable. If you're partitioning manually, you should be sure to create the ESP, which is a FAT32 partition with a type code of EF00 (in gdisk, sgdisk, or cgdisk) or that has its "boot flag" set (in parted, GParted, or most other libparted-based tools). You may also need to flag the ESP as such in Anaconda, but I don't recall the details of how to do that in Anaconda's user interface. You'll need to undo the things you said you tried (except for creating a BIOS Boot Partition; that's harmless, except for the waste of disk space it represents).
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
My suspicion is that you've booted the installer in EFI mode, which requires an EFI System Partition (ESP) to be bootable. If you're partitioning manually, you should be sure to create the ESP, which is a FAT32 partition with a type code of EF00 (in gdisk, sgdisk, or cgdisk) or that has its "boot flag" set (in parted, GParted, or most other libparted-based tools). You may also need to flag the ESP as such in Anaconda, but I don't recall the details of how to do that in Anaconda's user interface. You'll need to undo the things you said you tried (except for creating a BIOS Boot Partition; that's harmless, except for the waste of disk space it represents).
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
answered Sep 7 '13 at 17:10
Rod Smith
16.8k22042
16.8k22042
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
add a comment |
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
1
1
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
I solved it! I used another usb. After it I changed UEFI to Legaci first in bios. Usb booted and i created 3 partitions: - 120 mb (/boot) - 4 gb (swap) - 45GB (/ fedora install) It was easy finally. But thanks for help.
– Fakt7
Sep 7 '13 at 18:24
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f642296%2ffedora-19-you-have-not-created-a-bootloader-stage-1-target-device%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
