I want to extend Local Disk C but I can't create unallocated space next to it so that i just simply extend it
I urgently need to extend my Local Disk C but when O shrink the other disk (E), the unallocated space appears after disk E
so I'm unable to extend disk C to the unallocated space.
windows-10 hard-drive partitioning disk-space
add a comment |
I urgently need to extend my Local Disk C but when O shrink the other disk (E), the unallocated space appears after disk E
so I'm unable to extend disk C to the unallocated space.
windows-10 hard-drive partitioning disk-space
2
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42
add a comment |
I urgently need to extend my Local Disk C but when O shrink the other disk (E), the unallocated space appears after disk E
so I'm unable to extend disk C to the unallocated space.
windows-10 hard-drive partitioning disk-space
I urgently need to extend my Local Disk C but when O shrink the other disk (E), the unallocated space appears after disk E
so I'm unable to extend disk C to the unallocated space.
windows-10 hard-drive partitioning disk-space
windows-10 hard-drive partitioning disk-space
edited Dec 13 at 8:01
Ahmed Ashour
1,062610
1,062610
asked Dec 12 at 16:35
Naluzze Anita
111
111
2
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42
add a comment |
2
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42
2
2
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42
add a comment |
2 Answers
2
active
oldest
votes
If the E disk does not have software installed, we can try this method:
Create a partition for 292.97GB.
Then copy the data of the E disk to this new partition.
Delete the E drive.
Expand the C drive.
Tip: Please backup the data of the E disk in advance.
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
add a comment |
If you have or get a partition manager live CD/flash drive, you can tell it to move partition E to the end of the disk so the free space will be between it and partition C. Then, you can tell it to expand partition C to use the free space.
You don't want to be doing any of this from a system which is running on the same disk! That's why you need the live CD/flash drive.
The nice thing about this is that you may be able to schedule both tasks (to run one after the other) at the same time. Moving and resizing partitions often takes several hours so you can let it run when you are going out or overnight.
This is a fairly safe operation, but when doing anything like this, you should make sure you have backups of all your personal data and anything else you cannot afford to lose if the operation fails.
I use gparted (on a live CD) for all such things. (It knows about NTFS and Windows partitions and works fine with them and is easy to use.)
The great thing about gparted (aside from the fact that it's free) is that after you tell it all the steps you want it to do, it shows you the final results before doing anything. You can back out of steps or start over as many times as you need to without having touched the actual partitions. When you're happy with the tasks, then you tell it to go ahead and apply your changes.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1383030%2fi-want-to-extend-local-disk-c-but-i-cant-create-unallocated-space-next-to-it-so%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
If the E disk does not have software installed, we can try this method:
Create a partition for 292.97GB.
Then copy the data of the E disk to this new partition.
Delete the E drive.
Expand the C drive.
Tip: Please backup the data of the E disk in advance.
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
add a comment |
If the E disk does not have software installed, we can try this method:
Create a partition for 292.97GB.
Then copy the data of the E disk to this new partition.
Delete the E drive.
Expand the C drive.
Tip: Please backup the data of the E disk in advance.
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
add a comment |
If the E disk does not have software installed, we can try this method:
Create a partition for 292.97GB.
Then copy the data of the E disk to this new partition.
Delete the E drive.
Expand the C drive.
Tip: Please backup the data of the E disk in advance.
If the E disk does not have software installed, we can try this method:
Create a partition for 292.97GB.
Then copy the data of the E disk to this new partition.
Delete the E drive.
Expand the C drive.
Tip: Please backup the data of the E disk in advance.
answered Dec 13 at 15:11
Daisy Zhou
596114
596114
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
add a comment |
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
If drive E is easy to backup and restore from external media (or is empty), this approach will be very much faster than my answer which moves the partition.
– Joe
Dec 18 at 10:46
add a comment |
If you have or get a partition manager live CD/flash drive, you can tell it to move partition E to the end of the disk so the free space will be between it and partition C. Then, you can tell it to expand partition C to use the free space.
You don't want to be doing any of this from a system which is running on the same disk! That's why you need the live CD/flash drive.
The nice thing about this is that you may be able to schedule both tasks (to run one after the other) at the same time. Moving and resizing partitions often takes several hours so you can let it run when you are going out or overnight.
This is a fairly safe operation, but when doing anything like this, you should make sure you have backups of all your personal data and anything else you cannot afford to lose if the operation fails.
I use gparted (on a live CD) for all such things. (It knows about NTFS and Windows partitions and works fine with them and is easy to use.)
The great thing about gparted (aside from the fact that it's free) is that after you tell it all the steps you want it to do, it shows you the final results before doing anything. You can back out of steps or start over as many times as you need to without having touched the actual partitions. When you're happy with the tasks, then you tell it to go ahead and apply your changes.
add a comment |
If you have or get a partition manager live CD/flash drive, you can tell it to move partition E to the end of the disk so the free space will be between it and partition C. Then, you can tell it to expand partition C to use the free space.
You don't want to be doing any of this from a system which is running on the same disk! That's why you need the live CD/flash drive.
The nice thing about this is that you may be able to schedule both tasks (to run one after the other) at the same time. Moving and resizing partitions often takes several hours so you can let it run when you are going out or overnight.
This is a fairly safe operation, but when doing anything like this, you should make sure you have backups of all your personal data and anything else you cannot afford to lose if the operation fails.
I use gparted (on a live CD) for all such things. (It knows about NTFS and Windows partitions and works fine with them and is easy to use.)
The great thing about gparted (aside from the fact that it's free) is that after you tell it all the steps you want it to do, it shows you the final results before doing anything. You can back out of steps or start over as many times as you need to without having touched the actual partitions. When you're happy with the tasks, then you tell it to go ahead and apply your changes.
add a comment |
If you have or get a partition manager live CD/flash drive, you can tell it to move partition E to the end of the disk so the free space will be between it and partition C. Then, you can tell it to expand partition C to use the free space.
You don't want to be doing any of this from a system which is running on the same disk! That's why you need the live CD/flash drive.
The nice thing about this is that you may be able to schedule both tasks (to run one after the other) at the same time. Moving and resizing partitions often takes several hours so you can let it run when you are going out or overnight.
This is a fairly safe operation, but when doing anything like this, you should make sure you have backups of all your personal data and anything else you cannot afford to lose if the operation fails.
I use gparted (on a live CD) for all such things. (It knows about NTFS and Windows partitions and works fine with them and is easy to use.)
The great thing about gparted (aside from the fact that it's free) is that after you tell it all the steps you want it to do, it shows you the final results before doing anything. You can back out of steps or start over as many times as you need to without having touched the actual partitions. When you're happy with the tasks, then you tell it to go ahead and apply your changes.
If you have or get a partition manager live CD/flash drive, you can tell it to move partition E to the end of the disk so the free space will be between it and partition C. Then, you can tell it to expand partition C to use the free space.
You don't want to be doing any of this from a system which is running on the same disk! That's why you need the live CD/flash drive.
The nice thing about this is that you may be able to schedule both tasks (to run one after the other) at the same time. Moving and resizing partitions often takes several hours so you can let it run when you are going out or overnight.
This is a fairly safe operation, but when doing anything like this, you should make sure you have backups of all your personal data and anything else you cannot afford to lose if the operation fails.
I use gparted (on a live CD) for all such things. (It knows about NTFS and Windows partitions and works fine with them and is easy to use.)
The great thing about gparted (aside from the fact that it's free) is that after you tell it all the steps you want it to do, it shows you the final results before doing anything. You can back out of steps or start over as many times as you need to without having touched the actual partitions. When you're happy with the tasks, then you tell it to go ahead and apply your changes.
answered Dec 18 at 10:42
Joe
493613
493613
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1383030%2fi-want-to-extend-local-disk-c-but-i-cant-create-unallocated-space-next-to-it-so%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Create new volume (assume X:) in unallocated space. Move everything to X: from E:. Remove E:. Change letter from X: to E:. Extend C:.
– Akina
Dec 12 at 16:42