Printer on a ARM Linux (CUPS) - general theories/questions
up vote
4
down vote
favorite
I have a theory and I kindly ask the skilled linux users to confirm/deny it (I am not a skileld one at all). Im running:
Raspberry Pi model B+, Raspbian OS and CUPS 1.5.4
And I bought the SEWOO LK-TL322 POS printer.
The printer is supposed to support Linux CUPS driver they provide. Ok according to their 2 pages long simple manual (link down) I was able to install the printer. Worked in 1 min like a charm.
But, with the printer driver, a filter was installed - rastertosewoo filter which is failing with every print job, no matter how simple it is (error massage: rastertosewoo filter failed). I googled what a filter is and found out its a layer of editing the content to be printed to fit the next layer or finally the printer. This is the last layer provided by the manufacturer - guessing from the logs, since its the last filter to be started.
Theorys / Ideas:
1. Is it possible that the manufacturer says it supports "Linux CUPS" but does not say that only for some architectures? That the ARM architecture (raspberry pi) could be a filter issue?
2. If it is so, is there a way how to make it work for ARM? (I dont haev the filter sources, I just got a compiled filter) - recompiling the compiled?
3. Is there any generic linux "driver" that is simmilar or supports POS printers like this?
4. In the manual, the manufacturer informs about these two distro types: (Ubuntu) vs (SUSE, Fedora Core, RedHat) - could Raspbian be a isse (and not ARM)? I have read that Ubuntu and Debian are VERY close and that Raspbian is build on Debian so that should work .. am I correct?
5. I have read, that if a printer supports natively PostScript - it does not really need a driver, adn if my printer would support PS natively I could just add it as RAW printer and use it like that. I tried that, I am able to print ASCII but the moment I try to print a image I get a looong (200+ lines) printed output starting
%!PS-Adobe-3.0
%%BEGIN PROLOG
...
Does that mean my printer supports PS or not?
Last info: Yes, I contacted the manufacturer, without response yet and I highly doubt there will be any. Regarding POS printing on linux, I should look for something that supports natively PS and/or is covered in GHOST printer driver?
Thank you for any inputs or anything that could help me.. I could not sleep and am highly depressed, becasue it works like a charm on windows and doing trouble on linux :(
Links:
- Short installation manual
- CUPS driver by manufacturer - filter and PPD
linux printing cups arm
edited Sep 16 '14 at 14:39
jww
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
add a comment |
up vote
4
down vote
favorite
I have a theory and I kindly ask the skilled linux users to confirm/deny it (I am not a skileld one at all). Im running:
Raspberry Pi model B+, Raspbian OS and CUPS 1.5.4
And I bought the SEWOO LK-TL322 POS printer.
The printer is supposed to support Linux CUPS driver they provide. Ok according to their 2 pages long simple manual (link down) I was able to install the printer. Worked in 1 min like a charm.
But, with the printer driver, a filter was installed - rastertosewoo filter which is failing with every print job, no matter how simple it is (error massage: rastertosewoo filter failed). I googled what a filter is and found out its a layer of editing the content to be printed to fit the next layer or finally the printer. This is the last layer provided by the manufacturer - guessing from the logs, since its the last filter to be started.
Theorys / Ideas:
1. Is it possible that the manufacturer says it supports "Linux CUPS" but does not say that only for some architectures? That the ARM architecture (raspberry pi) could be a filter issue?
2. If it is so, is there a way how to make it work for ARM? (I dont haev the filter sources, I just got a compiled filter) - recompiling the compiled?
3. Is there any generic linux "driver" that is simmilar or supports POS printers like this?
4. In the manual, the manufacturer informs about these two distro types: (Ubuntu) vs (SUSE, Fedora Core, RedHat) - could Raspbian be a isse (and not ARM)? I have read that Ubuntu and Debian are VERY close and that Raspbian is build on Debian so that should work .. am I correct?
5. I have read, that if a printer supports natively PostScript - it does not really need a driver, adn if my printer would support PS natively I could just add it as RAW printer and use it like that. I tried that, I am able to print ASCII but the moment I try to print a image I get a looong (200+ lines) printed output starting
%!PS-Adobe-3.0
%%BEGIN PROLOG
...
Does that mean my printer supports PS or not?
Last info: Yes, I contacted the manufacturer, without response yet and I highly doubt there will be any. Regarding POS printing on linux, I should look for something that supports natively PS and/or is covered in GHOST printer driver?
Thank you for any inputs or anything that could help me.. I could not sleep and am highly depressed, becasue it works like a charm on windows and doing trouble on linux :(
Links:
- Short installation manual
- CUPS driver by manufacturer - filter and PPD
linux printing cups arm
edited Sep 16 '14 at 14:39
jww
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
I have a theory and I kindly ask the skilled linux users to confirm/deny it (I am not a skileld one at all). Im running:
Raspberry Pi model B+, Raspbian OS and CUPS 1.5.4
And I bought the SEWOO LK-TL322 POS printer.
The printer is supposed to support Linux CUPS driver they provide. Ok according to their 2 pages long simple manual (link down) I was able to install the printer. Worked in 1 min like a charm.
But, with the printer driver, a filter was installed - rastertosewoo filter which is failing with every print job, no matter how simple it is (error massage: rastertosewoo filter failed). I googled what a filter is and found out its a layer of editing the content to be printed to fit the next layer or finally the printer. This is the last layer provided by the manufacturer - guessing from the logs, since its the last filter to be started.
Theorys / Ideas:
1. Is it possible that the manufacturer says it supports "Linux CUPS" but does not say that only for some architectures? That the ARM architecture (raspberry pi) could be a filter issue?
2. If it is so, is there a way how to make it work for ARM? (I dont haev the filter sources, I just got a compiled filter) - recompiling the compiled?
3. Is there any generic linux "driver" that is simmilar or supports POS printers like this?
4. In the manual, the manufacturer informs about these two distro types: (Ubuntu) vs (SUSE, Fedora Core, RedHat) - could Raspbian be a isse (and not ARM)? I have read that Ubuntu and Debian are VERY close and that Raspbian is build on Debian so that should work .. am I correct?
5. I have read, that if a printer supports natively PostScript - it does not really need a driver, adn if my printer would support PS natively I could just add it as RAW printer and use it like that. I tried that, I am able to print ASCII but the moment I try to print a image I get a looong (200+ lines) printed output starting
%!PS-Adobe-3.0
%%BEGIN PROLOG
...
Does that mean my printer supports PS or not?
Last info: Yes, I contacted the manufacturer, without response yet and I highly doubt there will be any. Regarding POS printing on linux, I should look for something that supports natively PS and/or is covered in GHOST printer driver?
Thank you for any inputs or anything that could help me.. I could not sleep and am highly depressed, becasue it works like a charm on windows and doing trouble on linux :(
Links:
- Short installation manual
- CUPS driver by manufacturer - filter and PPD
linux printing cups arm
edited Sep 16 '14 at 14:39
jww
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
I have a theory and I kindly ask the skilled linux users to confirm/deny it (I am not a skileld one at all). Im running:
Raspberry Pi model B+, Raspbian OS and CUPS 1.5.4
And I bought the SEWOO LK-TL322 POS printer.
The printer is supposed to support Linux CUPS driver they provide. Ok according to their 2 pages long simple manual (link down) I was able to install the printer. Worked in 1 min like a charm.
But, with the printer driver, a filter was installed - rastertosewoo filter which is failing with every print job, no matter how simple it is (error massage: rastertosewoo filter failed). I googled what a filter is and found out its a layer of editing the content to be printed to fit the next layer or finally the printer. This is the last layer provided by the manufacturer - guessing from the logs, since its the last filter to be started.
Theorys / Ideas:
1. Is it possible that the manufacturer says it supports "Linux CUPS" but does not say that only for some architectures? That the ARM architecture (raspberry pi) could be a filter issue?
2. If it is so, is there a way how to make it work for ARM? (I dont haev the filter sources, I just got a compiled filter) - recompiling the compiled?
3. Is there any generic linux "driver" that is simmilar or supports POS printers like this?
4. In the manual, the manufacturer informs about these two distro types: (Ubuntu) vs (SUSE, Fedora Core, RedHat) - could Raspbian be a isse (and not ARM)? I have read that Ubuntu and Debian are VERY close and that Raspbian is build on Debian so that should work .. am I correct?
5. I have read, that if a printer supports natively PostScript - it does not really need a driver, adn if my printer would support PS natively I could just add it as RAW printer and use it like that. I tried that, I am able to print ASCII but the moment I try to print a image I get a looong (200+ lines) printed output starting
%!PS-Adobe-3.0
%%BEGIN PROLOG
...
Does that mean my printer supports PS or not?
Last info: Yes, I contacted the manufacturer, without response yet and I highly doubt there will be any. Regarding POS printing on linux, I should look for something that supports natively PS and/or is covered in GHOST printer driver?
Thank you for any inputs or anything that could help me.. I could not sleep and am highly depressed, becasue it works like a charm on windows and doing trouble on linux :(
Links:
- Short installation manual
- CUPS driver by manufacturer - filter and PPD
linux printing cups arm
linux printing cups arm
edited Sep 16 '14 at 14:39
jww
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
edited Sep 16 '14 at 14:39
jww
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
edited Sep 16 '14 at 14:39
jww
4,1082373143
edited Sep 16 '14 at 14:39
jww
4,1082373143
edited Sep 16 '14 at 14:39
jww
4,1082373143
4,1082373143
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
asked Sep 14 '14 at 11:31
Oliver Goossens
1493
1493
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06
add a comment |
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06
add a comment |
1 Answer
1
active
oldest
votes
up vote
2
down vote
accepted
Yep, the FILTERs are architecture dependent and after contacting the manufacturer he compiled and provided the ARM build for this driver (worked like a charm):
My dropbox link for users facing same problem: https://dl.dropboxusercontent.com/u/17524455/nodelete/SEWOO_CUPS_ARM_Driver.zip
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
accepted
Yep, the FILTERs are architecture dependent and after contacting the manufacturer he compiled and provided the ARM build for this driver (worked like a charm):
My dropbox link for users facing same problem: https://dl.dropboxusercontent.com/u/17524455/nodelete/SEWOO_CUPS_ARM_Driver.zip
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
add a comment |
up vote
2
down vote
accepted
Yep, the FILTERs are architecture dependent and after contacting the manufacturer he compiled and provided the ARM build for this driver (worked like a charm):
My dropbox link for users facing same problem: https://dl.dropboxusercontent.com/u/17524455/nodelete/SEWOO_CUPS_ARM_Driver.zip
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
add a comment |
up vote
2
down vote
accepted
up vote
2
down vote
accepted
Yep, the FILTERs are architecture dependent and after contacting the manufacturer he compiled and provided the ARM build for this driver (worked like a charm):
My dropbox link for users facing same problem: https://dl.dropboxusercontent.com/u/17524455/nodelete/SEWOO_CUPS_ARM_Driver.zip
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
Yep, the FILTERs are architecture dependent and after contacting the manufacturer he compiled and provided the ARM build for this driver (worked like a charm):
My dropbox link for users facing same problem: https://dl.dropboxusercontent.com/u/17524455/nodelete/SEWOO_CUPS_ARM_Driver.zip
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
answered Sep 16 '14 at 14:16
Oliver Goossens
1493
1493
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
add a comment |
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
2
2
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
Hi, your Dropbox link is no longer working. Could you perhaps upload it again? I will then mirror it.
– Daniel B
Nov 2 '14 at 22:20
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f811552%2fprinter-on-a-arm-linux-cups-general-theories-questions%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Just a comment. I just installed debian on a x86 machine and tested the driver there. Worked like a charm. So yep some filters have problem with ARM architercure obviously ... Damnit. anyone wants a POS printer? :)
– Oliver Goossens
Sep 15 '14 at 2:17
I was just contacted by the manufacturer, that they will provide a ARM based driver (filter) in the next days. Will upload for all and let you know.
– Oliver Goossens
Sep 15 '14 at 13:06