Allow Internet Access with Default Gateway on Windows 7 VPN Server
up vote
2
down vote
favorite
I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4
I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable.
I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN.
Any ideas on how I can fix this?
windows vpn
asked Jun 26 '12 at 18:32
jamireh
1112
|
show 1 more comment
up vote
2
down vote
favorite
I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4
I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable.
I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN.
Any ideas on how I can fix this?
windows vpn
asked Jun 26 '12 at 18:32
jamireh
1112
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34
|
show 1 more comment
up vote
2
down vote
favorite
up vote
2
down vote
favorite
I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4
I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable.
I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN.
Any ideas on how I can fix this?
windows vpn
asked Jun 26 '12 at 18:32
jamireh
1112
I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4
I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable.
I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN.
Any ideas on how I can fix this?
windows vpn
windows vpn
asked Jun 26 '12 at 18:32
jamireh
1112
asked Jun 26 '12 at 18:32
jamireh
1112
asked Jun 26 '12 at 18:32
jamireh
1112
asked Jun 26 '12 at 18:32
jamireh
1112
asked Jun 26 '12 at 18:32
jamireh
1112
1112
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34
|
show 1 more comment
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34
|
show 1 more comment
1 Answer
1
active
oldest
votes
up vote
0
down vote
Based on your update, you need to assure that the VPN server provides the clinet with an IP and a default gateway and likley DNS server addresses. What happens if you allow the VPN client to receive an address via DHCP rather than assigning the two you have? Can you confirm that the 192.168.1.10 &.11 addresses are on the local subnet which contains the gateway that the host system uses?
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Based on your update, you need to assure that the VPN server provides the clinet with an IP and a default gateway and likley DNS server addresses. What happens if you allow the VPN client to receive an address via DHCP rather than assigning the two you have? Can you confirm that the 192.168.1.10 &.11 addresses are on the local subnet which contains the gateway that the host system uses?
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
add a comment |
up vote
0
down vote
Based on your update, you need to assure that the VPN server provides the clinet with an IP and a default gateway and likley DNS server addresses. What happens if you allow the VPN client to receive an address via DHCP rather than assigning the two you have? Can you confirm that the 192.168.1.10 &.11 addresses are on the local subnet which contains the gateway that the host system uses?
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
add a comment |
up vote
0
down vote
up vote
0
down vote
Based on your update, you need to assure that the VPN server provides the clinet with an IP and a default gateway and likley DNS server addresses. What happens if you allow the VPN client to receive an address via DHCP rather than assigning the two you have? Can you confirm that the 192.168.1.10 &.11 addresses are on the local subnet which contains the gateway that the host system uses?
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
Based on your update, you need to assure that the VPN server provides the clinet with an IP and a default gateway and likley DNS server addresses. What happens if you allow the VPN client to receive an address via DHCP rather than assigning the two you have? Can you confirm that the 192.168.1.10 &.11 addresses are on the local subnet which contains the gateway that the host system uses?
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
edited Jun 26 '12 at 19:06
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
answered Jun 26 '12 at 18:45
Dave M
12.7k92838
12.7k92838
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
add a comment |
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
If I attempt to allow Home-VPN to issue its own address via DHCP, the client is prompted with an Error 720: The client is unable to connect to the sever. My router setup has two routers, one from the cable company, one for myself. The cable company has 192.168.1.1, my own has 192.168.1.2. The cable company router issues DHCP from 192.168.1.3-192.168.1.254.
– jamireh
Jun 26 '12 at 19:09
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
I don't think your second router (not from the cable company) is really acting like a router. How do you have the two routers connected together? Is the cable going from the LAN port on the cable router to the WAN port on your router or to the LAN port? I've setup the Win 7 VPN before and could access the internet when connected to the VPN. You also don't need to forward port 47 in the router. The VPN uses GRE instead of TCP or UDP for that port.
– wbeard52
Jan 1 '15 at 17:40
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f441858%2fallow-internet-access-with-default-gateway-on-windows-7-vpn-server%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What gateway does the client receive when they connect to the VPN? Are the two IP addresses on the same subnet as the network with the access to the Internet?
– Dave M
Jun 26 '12 at 18:35
When 'ipconfig' issued on the client after connecting to Home-VPN, the PPP Adapter (Home-VPN) is given a default gateway of 0.0.0.0 and one of the IP address the client is allowed to issue. It's current wireless connection IP information remains unchanged.
– jamireh
Jun 26 '12 at 18:42
Why have you made your pool of IP addresses for the VPN so small?
– Zoredache
Jun 26 '12 at 18:54
Because the Windows 7 VPN server can only allow one concurrent connection. It doesn't matter whether I make the pool 10 or 100 address, there will only ever be 1 address connected at a time.
– jamireh
Jun 26 '12 at 19:04
possible duplicate of Set up VPN Server on Windows 7 that shares internet connection
– Ƭᴇcʜιᴇ007
Jun 26 '12 at 19:34