Solid red light on Samsung CLP-325W
I'm getting a solid red light on my Samsung CLP-325W printer. The printer started showing this error when I was low on 2 color toners. I've bought the official toners from Samsung. however I'm no longer getting the errors about low toner, but I'm getting a solid red light.
I've also tried to observe this printer via the "Smart Panel." Any attempts to print fail.
Other notes:
This printer is connected to my network via an ethernet cable. I can view the printer's page. However that does not report any particular errors.
printer laser-printer
add a comment |
I'm getting a solid red light on my Samsung CLP-325W printer. The printer started showing this error when I was low on 2 color toners. I've bought the official toners from Samsung. however I'm no longer getting the errors about low toner, but I'm getting a solid red light.
I've also tried to observe this printer via the "Smart Panel." Any attempts to print fail.
Other notes:
This printer is connected to my network via an ethernet cable. I can view the printer's page. However that does not report any particular errors.
printer laser-printer
add a comment |
I'm getting a solid red light on my Samsung CLP-325W printer. The printer started showing this error when I was low on 2 color toners. I've bought the official toners from Samsung. however I'm no longer getting the errors about low toner, but I'm getting a solid red light.
I've also tried to observe this printer via the "Smart Panel." Any attempts to print fail.
Other notes:
This printer is connected to my network via an ethernet cable. I can view the printer's page. However that does not report any particular errors.
printer laser-printer
I'm getting a solid red light on my Samsung CLP-325W printer. The printer started showing this error when I was low on 2 color toners. I've bought the official toners from Samsung. however I'm no longer getting the errors about low toner, but I'm getting a solid red light.
I've also tried to observe this printer via the "Smart Panel." Any attempts to print fail.
Other notes:
This printer is connected to my network via an ethernet cable. I can view the printer's page. However that does not report any particular errors.
printer laser-printer
printer laser-printer
edited Aug 21 '16 at 15:38
Hennes
59.3k793142
59.3k793142
asked May 23 '14 at 20:12
monksymonksy
88651529
88651529
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
According to Samsung, any of these conditions can cause the On Line LED to glow solid red:
- Printer paper is jammed inside your printer.
- A cover is not closed properly.
- The toner cartridge is not inserted properly and needs to be reinstalled.
- The toner cartridge is running low.
- There is no paper in the paper tray.
- The paper inside the paper tray is not installed correctly.
If you've looked and it's none of these, then check for blocked/broken sensors and switches that may cause the printer to think one of these conditions is true.
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f758062%2fsolid-red-light-on-samsung-clp-325w%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
According to Samsung, any of these conditions can cause the On Line LED to glow solid red:
- Printer paper is jammed inside your printer.
- A cover is not closed properly.
- The toner cartridge is not inserted properly and needs to be reinstalled.
- The toner cartridge is running low.
- There is no paper in the paper tray.
- The paper inside the paper tray is not installed correctly.
If you've looked and it's none of these, then check for blocked/broken sensors and switches that may cause the printer to think one of these conditions is true.
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
add a comment |
According to Samsung, any of these conditions can cause the On Line LED to glow solid red:
- Printer paper is jammed inside your printer.
- A cover is not closed properly.
- The toner cartridge is not inserted properly and needs to be reinstalled.
- The toner cartridge is running low.
- There is no paper in the paper tray.
- The paper inside the paper tray is not installed correctly.
If you've looked and it's none of these, then check for blocked/broken sensors and switches that may cause the printer to think one of these conditions is true.
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
add a comment |
According to Samsung, any of these conditions can cause the On Line LED to glow solid red:
- Printer paper is jammed inside your printer.
- A cover is not closed properly.
- The toner cartridge is not inserted properly and needs to be reinstalled.
- The toner cartridge is running low.
- There is no paper in the paper tray.
- The paper inside the paper tray is not installed correctly.
If you've looked and it's none of these, then check for blocked/broken sensors and switches that may cause the printer to think one of these conditions is true.
According to Samsung, any of these conditions can cause the On Line LED to glow solid red:
- Printer paper is jammed inside your printer.
- A cover is not closed properly.
- The toner cartridge is not inserted properly and needs to be reinstalled.
- The toner cartridge is running low.
- There is no paper in the paper tray.
- The paper inside the paper tray is not installed correctly.
If you've looked and it's none of these, then check for blocked/broken sensors and switches that may cause the printer to think one of these conditions is true.
answered May 23 '14 at 20:19
Ƭᴇcʜιᴇ007Ƭᴇcʜιᴇ007
99.6k14158219
99.6k14158219
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
add a comment |
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
I replaced the Yellow one and it went to work. It never claimed that that one was low.
– monksy
May 23 '14 at 20:33
Well it just went back to red.
– monksy
May 23 '14 at 21:10
Well it just went back to red.
– monksy
May 23 '14 at 21:10
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f758062%2fsolid-red-light-on-samsung-clp-325w%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown