How can I create this warped checkerboard effect on Illustrator/Photoshop?












1















enter image description here



Here is an image by David Rudnick. I would like to create the checkered effect, been trying with illustrator but no luck. It seems like this was either wrapped on an existing object, or 3D extrusion.



If someone could lend a hand that would be fantastic! :)






adobe-photoshop adobe-illustrator vector illustration







share|improve this question























  • That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

    – usr2564301
    Jan 2 at 21:33
















1















enter image description here



Here is an image by David Rudnick. I would like to create the checkered effect, been trying with illustrator but no luck. It seems like this was either wrapped on an existing object, or 3D extrusion.



If someone could lend a hand that would be fantastic! :)






adobe-photoshop adobe-illustrator vector illustration







share|improve this question























  • That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

    – usr2564301
    Jan 2 at 21:33














1












1








1








enter image description here



Here is an image by David Rudnick. I would like to create the checkered effect, been trying with illustrator but no luck. It seems like this was either wrapped on an existing object, or 3D extrusion.



If someone could lend a hand that would be fantastic! :)






adobe-photoshop adobe-illustrator vector illustration







share|improve this question














enter image description here



Here is an image by David Rudnick. I would like to create the checkered effect, been trying with illustrator but no luck. It seems like this was either wrapped on an existing object, or 3D extrusion.



If someone could lend a hand that would be fantastic! :)






adobe-photoshop adobe-illustrator vector illustration




adobe-photoshop adobe-illustrator vector illustration






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Jan 2 at 19:51









wardrobefanaticwardrobefanatic

161




161













  • That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

    – usr2564301
    Jan 2 at 21:33



















  • That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

    – usr2564301
    Jan 2 at 21:33

















That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

– usr2564301
Jan 2 at 21:33





That soldier is very Rogue Trooper. (But that's done by a different Dave, though.)

– usr2564301
Jan 2 at 21:33










3 Answers
3






active

oldest

votes


















2














I used Plain-jane Illustrator, no plug-ins, and created simple rectangles, scaled and placed with smart guides on for snapping, placed an alternating row of them, then made both the alternating rows a symbol.



I used the direct selection (white arrow) tool to select all the outer edge anchor nodes, and pulled them back the correct amount to get this effect.



No tricks, no filters. Simple.



I only took it a small distance - you can keep going till the chevrons are very small, and you'll get materially the same effect as the example image.



enter image description here






share|improve this answer



















  • 1





    I stoled your idea, but also added a little.

    – user287001
    Jan 2 at 23:20











  • Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

    – wardrobefanatic
    Jan 3 at 19:59



















2














Actually the major idea is already shown by user GeradFalla - except the right spacing. The original stripe obviously wants to be like a 3D revolution surface, so let it be. Unfortunately 3D in Illustrator is a little poor, so we solve and draw the projection in 2D.



enter image description here




  1. Draw a 40-gon with the polygon tool. By holding shift force a side to be the uppermost part. Be sure you have no fill, only a stroke. Then rotate the shape 4,5 degrees to make one corner to be the uppermost point.


  2. Delete 3/4 of the 40-gon. Leave a 90 degree polyline sector between9 and 12 o'clock. I have splitted and colored the segments only to show them. For the work splitting and coloring is useless.


  3. Have Smart guides and snap to point ON, no other snaps. With two vertical lines (black) and horizontal lines from the nodes of the polyline draw the borders of a well spaced stripe



enter image description here




  1. Select the line grid. With the shape builder fill the rectangles with 2 solid colors. Do not use black nor white here.


  2. Remove remnants and strokes. You should now have this stripe of rectangles. Group it.


  3. Double click the shear tool and set vertical shearing 30 degrees. Apply it to the stripe.



7.Goto Object > Transform > Reflect > Vertical and make a flipped copy of the stripe. Then goto Edit > Edit Colors > Recolor artwork and recolor the stripes to opposite Black and White. I used light grey instead of white to make the stripe fully visible.



Now you have the needed stripes ready to clone and tile.






share|improve this answer


























  • Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

    – wardrobefanatic
    Jan 3 at 20:02



















1














Envelope Distort....



Checkered pattern-filled rectangle, Object > Envelope > Make with Mesh.



Then move, add/subtract, mesh points with the Mesh Tool and distort till your heart's content.



enter image description here



This isn't quite the same checkered pattern, but it's close enough to show the theory. Realize this is a very quick demonstration of the features its not a direct attempt to mimic the sample image. More care would be needed to create the proper checker pattern and adjust the mesh points. It can be done using this method though and there would be no need to draw every piece of the pattern manually.






share|improve this answer


























  • Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

    – GerardFalla
    Jan 2 at 22:59








  • 1





    With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

    – Scott
    Jan 3 at 2:26











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "174"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgraphicdesign.stackexchange.com%2fquestions%2f118658%2fhow-can-i-create-this-warped-checkerboard-effect-on-illustrator-photoshop%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























3 Answers
3






active

oldest

votes








3 Answers
3






active

oldest

votes









active

oldest

votes






active

oldest

votes









2














I used Plain-jane Illustrator, no plug-ins, and created simple rectangles, scaled and placed with smart guides on for snapping, placed an alternating row of them, then made both the alternating rows a symbol.



I used the direct selection (white arrow) tool to select all the outer edge anchor nodes, and pulled them back the correct amount to get this effect.



No tricks, no filters. Simple.



I only took it a small distance - you can keep going till the chevrons are very small, and you'll get materially the same effect as the example image.



enter image description here






share|improve this answer



















  • 1





    I stoled your idea, but also added a little.

    – user287001
    Jan 2 at 23:20











  • Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

    – wardrobefanatic
    Jan 3 at 19:59
















2














I used Plain-jane Illustrator, no plug-ins, and created simple rectangles, scaled and placed with smart guides on for snapping, placed an alternating row of them, then made both the alternating rows a symbol.



I used the direct selection (white arrow) tool to select all the outer edge anchor nodes, and pulled them back the correct amount to get this effect.



No tricks, no filters. Simple.



I only took it a small distance - you can keep going till the chevrons are very small, and you'll get materially the same effect as the example image.



enter image description here






share|improve this answer



















  • 1





    I stoled your idea, but also added a little.

    – user287001
    Jan 2 at 23:20











  • Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

    – wardrobefanatic
    Jan 3 at 19:59














2












2








2







I used Plain-jane Illustrator, no plug-ins, and created simple rectangles, scaled and placed with smart guides on for snapping, placed an alternating row of them, then made both the alternating rows a symbol.



I used the direct selection (white arrow) tool to select all the outer edge anchor nodes, and pulled them back the correct amount to get this effect.



No tricks, no filters. Simple.



I only took it a small distance - you can keep going till the chevrons are very small, and you'll get materially the same effect as the example image.



enter image description here






share|improve this answer













I used Plain-jane Illustrator, no plug-ins, and created simple rectangles, scaled and placed with smart guides on for snapping, placed an alternating row of them, then made both the alternating rows a symbol.



I used the direct selection (white arrow) tool to select all the outer edge anchor nodes, and pulled them back the correct amount to get this effect.



No tricks, no filters. Simple.



I only took it a small distance - you can keep going till the chevrons are very small, and you'll get materially the same effect as the example image.



enter image description here







share|improve this answer












share|improve this answer



share|improve this answer










answered Jan 2 at 20:11









GerardFallaGerardFalla

2,995217




2,995217








  • 1





    I stoled your idea, but also added a little.

    – user287001
    Jan 2 at 23:20











  • Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

    – wardrobefanatic
    Jan 3 at 19:59














  • 1





    I stoled your idea, but also added a little.

    – user287001
    Jan 2 at 23:20











  • Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

    – wardrobefanatic
    Jan 3 at 19:59








1




1





I stoled your idea, but also added a little.

– user287001
Jan 2 at 23:20





I stoled your idea, but also added a little.

– user287001
Jan 2 at 23:20













Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

– wardrobefanatic
Jan 3 at 19:59





Thank you!!!!!! Ah, you all in this website are just divine!! It would be really nice if you could iterate how you placed the rectangle, or visually give a step by step screenshot. Did you use the shear tool?

– wardrobefanatic
Jan 3 at 19:59











2














Actually the major idea is already shown by user GeradFalla - except the right spacing. The original stripe obviously wants to be like a 3D revolution surface, so let it be. Unfortunately 3D in Illustrator is a little poor, so we solve and draw the projection in 2D.



enter image description here




  1. Draw a 40-gon with the polygon tool. By holding shift force a side to be the uppermost part. Be sure you have no fill, only a stroke. Then rotate the shape 4,5 degrees to make one corner to be the uppermost point.


  2. Delete 3/4 of the 40-gon. Leave a 90 degree polyline sector between9 and 12 o'clock. I have splitted and colored the segments only to show them. For the work splitting and coloring is useless.


  3. Have Smart guides and snap to point ON, no other snaps. With two vertical lines (black) and horizontal lines from the nodes of the polyline draw the borders of a well spaced stripe



enter image description here




  1. Select the line grid. With the shape builder fill the rectangles with 2 solid colors. Do not use black nor white here.


  2. Remove remnants and strokes. You should now have this stripe of rectangles. Group it.


  3. Double click the shear tool and set vertical shearing 30 degrees. Apply it to the stripe.



7.Goto Object > Transform > Reflect > Vertical and make a flipped copy of the stripe. Then goto Edit > Edit Colors > Recolor artwork and recolor the stripes to opposite Black and White. I used light grey instead of white to make the stripe fully visible.



Now you have the needed stripes ready to clone and tile.






share|improve this answer


























  • Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

    – wardrobefanatic
    Jan 3 at 20:02
















2














Actually the major idea is already shown by user GeradFalla - except the right spacing. The original stripe obviously wants to be like a 3D revolution surface, so let it be. Unfortunately 3D in Illustrator is a little poor, so we solve and draw the projection in 2D.



enter image description here




  1. Draw a 40-gon with the polygon tool. By holding shift force a side to be the uppermost part. Be sure you have no fill, only a stroke. Then rotate the shape 4,5 degrees to make one corner to be the uppermost point.


  2. Delete 3/4 of the 40-gon. Leave a 90 degree polyline sector between9 and 12 o'clock. I have splitted and colored the segments only to show them. For the work splitting and coloring is useless.


  3. Have Smart guides and snap to point ON, no other snaps. With two vertical lines (black) and horizontal lines from the nodes of the polyline draw the borders of a well spaced stripe



enter image description here




  1. Select the line grid. With the shape builder fill the rectangles with 2 solid colors. Do not use black nor white here.


  2. Remove remnants and strokes. You should now have this stripe of rectangles. Group it.


  3. Double click the shear tool and set vertical shearing 30 degrees. Apply it to the stripe.



7.Goto Object > Transform > Reflect > Vertical and make a flipped copy of the stripe. Then goto Edit > Edit Colors > Recolor artwork and recolor the stripes to opposite Black and White. I used light grey instead of white to make the stripe fully visible.



Now you have the needed stripes ready to clone and tile.






share|improve this answer


























  • Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

    – wardrobefanatic
    Jan 3 at 20:02














2












2








2







Actually the major idea is already shown by user GeradFalla - except the right spacing. The original stripe obviously wants to be like a 3D revolution surface, so let it be. Unfortunately 3D in Illustrator is a little poor, so we solve and draw the projection in 2D.



enter image description here




  1. Draw a 40-gon with the polygon tool. By holding shift force a side to be the uppermost part. Be sure you have no fill, only a stroke. Then rotate the shape 4,5 degrees to make one corner to be the uppermost point.


  2. Delete 3/4 of the 40-gon. Leave a 90 degree polyline sector between9 and 12 o'clock. I have splitted and colored the segments only to show them. For the work splitting and coloring is useless.


  3. Have Smart guides and snap to point ON, no other snaps. With two vertical lines (black) and horizontal lines from the nodes of the polyline draw the borders of a well spaced stripe



enter image description here




  1. Select the line grid. With the shape builder fill the rectangles with 2 solid colors. Do not use black nor white here.


  2. Remove remnants and strokes. You should now have this stripe of rectangles. Group it.


  3. Double click the shear tool and set vertical shearing 30 degrees. Apply it to the stripe.



7.Goto Object > Transform > Reflect > Vertical and make a flipped copy of the stripe. Then goto Edit > Edit Colors > Recolor artwork and recolor the stripes to opposite Black and White. I used light grey instead of white to make the stripe fully visible.



Now you have the needed stripes ready to clone and tile.






share|improve this answer















Actually the major idea is already shown by user GeradFalla - except the right spacing. The original stripe obviously wants to be like a 3D revolution surface, so let it be. Unfortunately 3D in Illustrator is a little poor, so we solve and draw the projection in 2D.



enter image description here




  1. Draw a 40-gon with the polygon tool. By holding shift force a side to be the uppermost part. Be sure you have no fill, only a stroke. Then rotate the shape 4,5 degrees to make one corner to be the uppermost point.


  2. Delete 3/4 of the 40-gon. Leave a 90 degree polyline sector between9 and 12 o'clock. I have splitted and colored the segments only to show them. For the work splitting and coloring is useless.


  3. Have Smart guides and snap to point ON, no other snaps. With two vertical lines (black) and horizontal lines from the nodes of the polyline draw the borders of a well spaced stripe



enter image description here




  1. Select the line grid. With the shape builder fill the rectangles with 2 solid colors. Do not use black nor white here.


  2. Remove remnants and strokes. You should now have this stripe of rectangles. Group it.


  3. Double click the shear tool and set vertical shearing 30 degrees. Apply it to the stripe.



7.Goto Object > Transform > Reflect > Vertical and make a flipped copy of the stripe. Then goto Edit > Edit Colors > Recolor artwork and recolor the stripes to opposite Black and White. I used light grey instead of white to make the stripe fully visible.



Now you have the needed stripes ready to clone and tile.







share|improve this answer














share|improve this answer



share|improve this answer








edited Jan 3 at 0:38

























answered Jan 2 at 23:10









user287001user287001

20.5k21236




20.5k21236













  • Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

    – wardrobefanatic
    Jan 3 at 20:02



















  • Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

    – wardrobefanatic
    Jan 3 at 20:02

















Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

– wardrobefanatic
Jan 3 at 20:02





Thank you for this one too! I've never used the polygon tool. I'll fool around Ai to see how to make it. Super helpful!!

– wardrobefanatic
Jan 3 at 20:02











1














Envelope Distort....



Checkered pattern-filled rectangle, Object > Envelope > Make with Mesh.



Then move, add/subtract, mesh points with the Mesh Tool and distort till your heart's content.



enter image description here



This isn't quite the same checkered pattern, but it's close enough to show the theory. Realize this is a very quick demonstration of the features its not a direct attempt to mimic the sample image. More care would be needed to create the proper checker pattern and adjust the mesh points. It can be done using this method though and there would be no need to draw every piece of the pattern manually.






share|improve this answer


























  • Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

    – GerardFalla
    Jan 2 at 22:59








  • 1





    With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

    – Scott
    Jan 3 at 2:26
















1














Envelope Distort....



Checkered pattern-filled rectangle, Object > Envelope > Make with Mesh.



Then move, add/subtract, mesh points with the Mesh Tool and distort till your heart's content.



enter image description here



This isn't quite the same checkered pattern, but it's close enough to show the theory. Realize this is a very quick demonstration of the features its not a direct attempt to mimic the sample image. More care would be needed to create the proper checker pattern and adjust the mesh points. It can be done using this method though and there would be no need to draw every piece of the pattern manually.






share|improve this answer


























  • Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

    – GerardFalla
    Jan 2 at 22:59








  • 1





    With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

    – Scott
    Jan 3 at 2:26














1












1








1







Envelope Distort....



Checkered pattern-filled rectangle, Object > Envelope > Make with Mesh.



Then move, add/subtract, mesh points with the Mesh Tool and distort till your heart's content.



enter image description here



This isn't quite the same checkered pattern, but it's close enough to show the theory. Realize this is a very quick demonstration of the features its not a direct attempt to mimic the sample image. More care would be needed to create the proper checker pattern and adjust the mesh points. It can be done using this method though and there would be no need to draw every piece of the pattern manually.






share|improve this answer















Envelope Distort....



Checkered pattern-filled rectangle, Object > Envelope > Make with Mesh.



Then move, add/subtract, mesh points with the Mesh Tool and distort till your heart's content.



enter image description here



This isn't quite the same checkered pattern, but it's close enough to show the theory. Realize this is a very quick demonstration of the features its not a direct attempt to mimic the sample image. More care would be needed to create the proper checker pattern and adjust the mesh points. It can be done using this method though and there would be no need to draw every piece of the pattern manually.







share|improve this answer














share|improve this answer



share|improve this answer








edited Jan 3 at 6:46

























answered Jan 2 at 21:57









ScottScott

146k14201411




146k14201411













  • Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

    – GerardFalla
    Jan 2 at 22:59








  • 1





    With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

    – Scott
    Jan 3 at 2:26



















  • Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

    – GerardFalla
    Jan 2 at 22:59








  • 1





    With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

    – Scott
    Jan 3 at 2:26

















Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

– GerardFalla
Jan 2 at 22:59







Yours is a great approach for rectilinear patterns, but for myself I find it less successful with angled like the OP's example; I tried it, and even with a 1- row only by 6 column mesh, there was significant distortion of the underlying angled elements with a simple straight linear movement, sadly. But it's a wonderful technique to have in one's back pocket, i have to say - thank you for that as always Scott!

– GerardFalla
Jan 2 at 22:59






1




1





With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

– Scott
Jan 3 at 2:26





With enough care regarding the mesh and it's internal pattern, one could create the rounded distortion of the image in the question. This was merely a quick example to show the technique.

– Scott
Jan 3 at 2:26


















draft saved

draft discarded




















































Thanks for contributing an answer to Graphic Design Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid …



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgraphicdesign.stackexchange.com%2fquestions%2f118658%2fhow-can-i-create-this-warped-checkerboard-effect-on-illustrator-photoshop%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







-

Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Image
0 0 $begingroup$ Need help with this problem. Suppose our lazy professor collects a quiz and a homework assignment from a class of n students one day, then distributes both the quizzes and the homework assignments back to the class in a random fashion for grading. Each student receives one quiz and one homework assignment to grade. (a) What is the probability that every student receives someone else's quiz to grade, and someone else's homework to grade? (b) What is the probability that no student receives both their own quiz and their own homework assignment to grade? In this case, some students may receive their own quiz, and others may receive their own homework assignment. (c) Compute the limiting probability as n approaches infinity in each case. ...
Read more

Aardman Animations

Image
Aardman Animations, Ltd. Aardman Animations Tipo privada Atividade Animação em stop-motion , Animação em CGI Fundação 1972 Fundador(es) Peter Lord David Sproxton Sede Bristol, Inglaterra  Reino Unido Proprietário(s) Dreamworks Pessoas-chave Peter Lord David Sproxton Nick Park Divisões Aardman Features Aardman Digital Aardman Commercials Aardman Broadcast Aardman International Aardman Rights Aardman Effects Aardman 3-D Systems Aardman Nathan Love AardBoiled Website oficial aardman.com ...
Read more

Are they similar matrix

Image
0 $begingroup$ Do $begin{bmatrix} 0&i&0\0&0&1\0&0&0 end{bmatrix} $ and $begin{bmatrix} 0&0&0\-i&0&0\0&1&0 end{bmatrix} $ are similar.Is this True/false Clearly both are nilpotent and one is conjucate transpose of other but how to know if they are similar.i'm stuck. Please help me linear-algebra vector-spaces eigenvalues-eigenvectors generalizedeigenvector share | cite | improve this question edited Dec 10 '18 at 6:38 Vasanth Kris asked Dec 10 '18 at 6:19 ...
Read more