How to use multiple virtual monitors if host has a single monitor?
up vote
3
down vote
favorite
My host has a single physical monitor but I need to reproduce a bug in an application that requires two monitors, each having a different scaling factor.
VMWare provides documentation for cycling through multiple virtual machines but it requires the host to have multiple physical monitors.
How can one cycle through multiple virtual monitors with a single physical host monitor?
UPDATE: The guest is Windows 10. The host is either Windows or MacOS.
virtual-machine multiple-monitors
|
show 1 more comment
up vote
3
down vote
favorite
My host has a single physical monitor but I need to reproduce a bug in an application that requires two monitors, each having a different scaling factor.
VMWare provides documentation for cycling through multiple virtual machines but it requires the host to have multiple physical monitors.
How can one cycle through multiple virtual monitors with a single physical host monitor?
UPDATE: The guest is Windows 10. The host is either Windows or MacOS.
virtual-machine multiple-monitors
What OS on the host and VMs?
– music2myear
May 23 at 21:47
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44
|
show 1 more comment
up vote
3
down vote
favorite
up vote
3
down vote
favorite
My host has a single physical monitor but I need to reproduce a bug in an application that requires two monitors, each having a different scaling factor.
VMWare provides documentation for cycling through multiple virtual machines but it requires the host to have multiple physical monitors.
How can one cycle through multiple virtual monitors with a single physical host monitor?
UPDATE: The guest is Windows 10. The host is either Windows or MacOS.
virtual-machine multiple-monitors
My host has a single physical monitor but I need to reproduce a bug in an application that requires two monitors, each having a different scaling factor.
VMWare provides documentation for cycling through multiple virtual machines but it requires the host to have multiple physical monitors.
How can one cycle through multiple virtual monitors with a single physical host monitor?
UPDATE: The guest is Windows 10. The host is either Windows or MacOS.
virtual-machine multiple-monitors
virtual-machine multiple-monitors
edited Dec 3 at 19:31
Hennes
58.7k792141
58.7k792141
asked May 23 at 20:32
Gili
1,05731326
1,05731326
What OS on the host and VMs?
– music2myear
May 23 at 21:47
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44
|
show 1 more comment
What OS on the host and VMs?
– music2myear
May 23 at 21:47
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44
What OS on the host and VMs?
– music2myear
May 23 at 21:47
What OS on the host and VMs?
– music2myear
May 23 at 21:47
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44
|
show 1 more comment
1 Answer
1
active
oldest
votes
up vote
1
down vote
With some effort I've managed to configure multiple virtual monitors using VMWare Workstation for a Windows 10 guest.
Host:
- Windows 7 Pro x64
- VMWare Workstation Pro 12.5.9 build-7535481
Guest:
- Windows 10 Pro 1709 x64 with all updates and current VMware Tools installed
VMWare Virtual Machine Display Settings:
- 3D graphics → checked Accelerate 3D graphics
- Monitors → selected Specify monitor settings
- Number of monitors: 4
- Maximum resolution of any one monitor: 1920x1080
- Graphics memory: 256M
- Display scaling → unchecked Automatically adjust user interface size ...
Preparations
- Start the Windows 10 guest
- Don't use Full Screen
- From VMWare Workstation's menu select View → Autosize → Center Guest
Configuration inside the Windows 10 guest machine:
Right-click on the Desktop, select Display settings and set the resolution to 800x600 (simply
to better see the additional monitors created in the following steps).
Now you will notice that nothing happens if you click the Detect button under Multiple Displays.
Note: In previous Windows versions you were offered an option "try to connect anyway on: VGA" if the display was not detected.
This might be a bug (or feature) introduced with Windows 10 Version 1703. There is a Microsoft Technet Question providing more information.
However, you can still force this by following the next steps:
- Run the following command:
displayswitch.exe
- Alternatively simply use the Windows + P hotkey (inside the Guest !)
This will bring up the Project settings plane. Choose Extend:
Et voilà, now you have two monitors:
And of course you now also see the usual multiple display options in the Display Settings.
In order to add the third monitor, press Detect. This will create a new box labeled Display not detected. You have to click on that box so that it gets highlighted in blue:
Now scroll down to Multiple Displays section and change the selection in the drop-down box from No display detected to the bottom-most entry Try to connect anyway on: VGA:
Repeat this process for additional monitors.
You can also align the monitors to your liking:
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1325393%2fhow-to-use-multiple-virtual-monitors-if-host-has-a-single-monitor%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
1
down vote
With some effort I've managed to configure multiple virtual monitors using VMWare Workstation for a Windows 10 guest.
Host:
- Windows 7 Pro x64
- VMWare Workstation Pro 12.5.9 build-7535481
Guest:
- Windows 10 Pro 1709 x64 with all updates and current VMware Tools installed
VMWare Virtual Machine Display Settings:
- 3D graphics → checked Accelerate 3D graphics
- Monitors → selected Specify monitor settings
- Number of monitors: 4
- Maximum resolution of any one monitor: 1920x1080
- Graphics memory: 256M
- Display scaling → unchecked Automatically adjust user interface size ...
Preparations
- Start the Windows 10 guest
- Don't use Full Screen
- From VMWare Workstation's menu select View → Autosize → Center Guest
Configuration inside the Windows 10 guest machine:
Right-click on the Desktop, select Display settings and set the resolution to 800x600 (simply
to better see the additional monitors created in the following steps).
Now you will notice that nothing happens if you click the Detect button under Multiple Displays.
Note: In previous Windows versions you were offered an option "try to connect anyway on: VGA" if the display was not detected.
This might be a bug (or feature) introduced with Windows 10 Version 1703. There is a Microsoft Technet Question providing more information.
However, you can still force this by following the next steps:
- Run the following command:
displayswitch.exe
- Alternatively simply use the Windows + P hotkey (inside the Guest !)
This will bring up the Project settings plane. Choose Extend:
Et voilà, now you have two monitors:
And of course you now also see the usual multiple display options in the Display Settings.
In order to add the third monitor, press Detect. This will create a new box labeled Display not detected. You have to click on that box so that it gets highlighted in blue:
Now scroll down to Multiple Displays section and change the selection in the drop-down box from No display detected to the bottom-most entry Try to connect anyway on: VGA:
Repeat this process for additional monitors.
You can also align the monitors to your liking:
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
add a comment |
up vote
1
down vote
With some effort I've managed to configure multiple virtual monitors using VMWare Workstation for a Windows 10 guest.
Host:
- Windows 7 Pro x64
- VMWare Workstation Pro 12.5.9 build-7535481
Guest:
- Windows 10 Pro 1709 x64 with all updates and current VMware Tools installed
VMWare Virtual Machine Display Settings:
- 3D graphics → checked Accelerate 3D graphics
- Monitors → selected Specify monitor settings
- Number of monitors: 4
- Maximum resolution of any one monitor: 1920x1080
- Graphics memory: 256M
- Display scaling → unchecked Automatically adjust user interface size ...
Preparations
- Start the Windows 10 guest
- Don't use Full Screen
- From VMWare Workstation's menu select View → Autosize → Center Guest
Configuration inside the Windows 10 guest machine:
Right-click on the Desktop, select Display settings and set the resolution to 800x600 (simply
to better see the additional monitors created in the following steps).
Now you will notice that nothing happens if you click the Detect button under Multiple Displays.
Note: In previous Windows versions you were offered an option "try to connect anyway on: VGA" if the display was not detected.
This might be a bug (or feature) introduced with Windows 10 Version 1703. There is a Microsoft Technet Question providing more information.
However, you can still force this by following the next steps:
- Run the following command:
displayswitch.exe
- Alternatively simply use the Windows + P hotkey (inside the Guest !)
This will bring up the Project settings plane. Choose Extend:
Et voilà, now you have two monitors:
And of course you now also see the usual multiple display options in the Display Settings.
In order to add the third monitor, press Detect. This will create a new box labeled Display not detected. You have to click on that box so that it gets highlighted in blue:
Now scroll down to Multiple Displays section and change the selection in the drop-down box from No display detected to the bottom-most entry Try to connect anyway on: VGA:
Repeat this process for additional monitors.
You can also align the monitors to your liking:
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
add a comment |
up vote
1
down vote
up vote
1
down vote
With some effort I've managed to configure multiple virtual monitors using VMWare Workstation for a Windows 10 guest.
Host:
- Windows 7 Pro x64
- VMWare Workstation Pro 12.5.9 build-7535481
Guest:
- Windows 10 Pro 1709 x64 with all updates and current VMware Tools installed
VMWare Virtual Machine Display Settings:
- 3D graphics → checked Accelerate 3D graphics
- Monitors → selected Specify monitor settings
- Number of monitors: 4
- Maximum resolution of any one monitor: 1920x1080
- Graphics memory: 256M
- Display scaling → unchecked Automatically adjust user interface size ...
Preparations
- Start the Windows 10 guest
- Don't use Full Screen
- From VMWare Workstation's menu select View → Autosize → Center Guest
Configuration inside the Windows 10 guest machine:
Right-click on the Desktop, select Display settings and set the resolution to 800x600 (simply
to better see the additional monitors created in the following steps).
Now you will notice that nothing happens if you click the Detect button under Multiple Displays.
Note: In previous Windows versions you were offered an option "try to connect anyway on: VGA" if the display was not detected.
This might be a bug (or feature) introduced with Windows 10 Version 1703. There is a Microsoft Technet Question providing more information.
However, you can still force this by following the next steps:
- Run the following command:
displayswitch.exe
- Alternatively simply use the Windows + P hotkey (inside the Guest !)
This will bring up the Project settings plane. Choose Extend:
Et voilà, now you have two monitors:
And of course you now also see the usual multiple display options in the Display Settings.
In order to add the third monitor, press Detect. This will create a new box labeled Display not detected. You have to click on that box so that it gets highlighted in blue:
Now scroll down to Multiple Displays section and change the selection in the drop-down box from No display detected to the bottom-most entry Try to connect anyway on: VGA:
Repeat this process for additional monitors.
You can also align the monitors to your liking:
With some effort I've managed to configure multiple virtual monitors using VMWare Workstation for a Windows 10 guest.
Host:
- Windows 7 Pro x64
- VMWare Workstation Pro 12.5.9 build-7535481
Guest:
- Windows 10 Pro 1709 x64 with all updates and current VMware Tools installed
VMWare Virtual Machine Display Settings:
- 3D graphics → checked Accelerate 3D graphics
- Monitors → selected Specify monitor settings
- Number of monitors: 4
- Maximum resolution of any one monitor: 1920x1080
- Graphics memory: 256M
- Display scaling → unchecked Automatically adjust user interface size ...
Preparations
- Start the Windows 10 guest
- Don't use Full Screen
- From VMWare Workstation's menu select View → Autosize → Center Guest
Configuration inside the Windows 10 guest machine:
Right-click on the Desktop, select Display settings and set the resolution to 800x600 (simply
to better see the additional monitors created in the following steps).
Now you will notice that nothing happens if you click the Detect button under Multiple Displays.
Note: In previous Windows versions you were offered an option "try to connect anyway on: VGA" if the display was not detected.
This might be a bug (or feature) introduced with Windows 10 Version 1703. There is a Microsoft Technet Question providing more information.
However, you can still force this by following the next steps:
- Run the following command:
displayswitch.exe
- Alternatively simply use the Windows + P hotkey (inside the Guest !)
This will bring up the Project settings plane. Choose Extend:
Et voilà, now you have two monitors:
And of course you now also see the usual multiple display options in the Display Settings.
In order to add the third monitor, press Detect. This will create a new box labeled Display not detected. You have to click on that box so that it gets highlighted in blue:
Now scroll down to Multiple Displays section and change the selection in the drop-down box from No display detected to the bottom-most entry Try to connect anyway on: VGA:
Repeat this process for additional monitors.
You can also align the monitors to your liking:
edited Sep 6 at 9:14
answered May 24 at 16:30
gollum
216111
216111
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
add a comment |
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not apply to VMware Fusion (MacOS Host). There is no option to select the number of monitors.
– Hec
Jul 1 at 8:18
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
This solution does not work for me for the following reason: (1) The "Select and rearrange display" dialog shows 4 monitors, but only 3 are rendered inside the guest. (2) All but the first monitor do not respond to right-mouse mouse clicks. Windows cannot be dragged from one virtual monitor to another. In short, we're getting close to a solution but this functionality seems to be broken in its current state. This was tested using a Windows 10.0.17134.254 host and a Windows 10.0.16299.125 guest.
– Gili
Sep 5 at 21:13
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
@Gili I've added an additional screenshot showing 4 virtual monitors. No issues with right-clicks. I guess you're doing something wrong. Make sure you have selected View → Autosize → Center Guest. However, I've shown the basic concept and given a valid answer to your question. If you experience bugs you might add a new question or try to get support from VMWare. Cheers.
– gollum
Sep 6 at 9:20
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1325393%2fhow-to-use-multiple-virtual-monitors-if-host-has-a-single-monitor%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What OS on the host and VMs?
– music2myear
May 23 at 21:47
This search brings up several QAs you should probably read: superuser.com/search?q=virtual+monitors+in+vmware And here are a few of the most relevant-appearing from the top of that search: superuser.com/questions/680841/… superuser.com/questions/1176221/…
– music2myear
May 23 at 21:48
@music2myear Question updated. superuser.com/q/1176221/57662 looks promising but it is a Windows 7 guest and does not explain how he got it working. superuser.com/a/964511/57662 is Windows 7 specific and doesn't seem to work on Windows 10.
– Gili
May 23 at 21:55
@Gili It being a Windows 7 guest doesn’t chnage how it’s accomplished
– Ramhound
May 23 at 22:49
@Ramhound It might make a difference. When I go into "Display Properties" I don't have an interface for configuring multiple monitors. When I go into "Device Manager" I only see a single monitor. I assume that is part of the problem. This is what I see running Windows 10 as a guest in windowed mode.
– Gili
May 24 at 7:44