Can you get a reply from a HTTPS site using the Ping command?
up vote
44
down vote
favorite
I tried using the ping command on a https page, but the message says that ping could not find the host. Is there some issue regarding ping and https?
http ping https
edited Aug 22 '11 at 13:38
slhck
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
add a comment |
up vote
44
down vote
favorite
I tried using the ping command on a https page, but the message says that ping could not find the host. Is there some issue regarding ping and https?
http ping https
edited Aug 22 '11 at 13:38
slhck
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
6
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
4
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02
add a comment |
up vote
44
down vote
favorite
up vote
44
down vote
favorite
I tried using the ping command on a https page, but the message says that ping could not find the host. Is there some issue regarding ping and https?
http ping https
edited Aug 22 '11 at 13:38
slhck
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
I tried using the ping command on a https page, but the message says that ping could not find the host. Is there some issue regarding ping and https?
http ping https
http ping https
edited Aug 22 '11 at 13:38
slhck
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
edited Aug 22 '11 at 13:38
slhck
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
edited Aug 22 '11 at 13:38
slhck
158k47437461
edited Aug 22 '11 at 13:38
slhck
158k47437461
edited Aug 22 '11 at 13:38
slhck
158k47437461
158k47437461
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
asked Aug 22 '11 at 13:33
Shamim Hafiz
53141728
53141728
6
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
4
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02
add a comment |
6
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
4
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02
6
6
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
4
4
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02
add a comment |
4 Answers
4
active
oldest
votes
up vote
35
down vote
accepted
The answer to your question (Can you get a reply from a HTTPS site using the Ping command?) is Yes, you can, as long as ICMP replies are enabled on the HTTPS site provider. However, it has nothing to do with HTTP or HTTPS:
Ping will use ICMP protocol, it belongs to TCP/IP Internet Layer, which is a lower layer than HTTP or HTTPs (from Application Layer):
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP response. In the process it measures the time from transmission to reception (round-trip time)1 and records any packet loss. The results of the test are printed in form of a statistical summary of the response packets received, including the minimum, maximum, and the mean round-trip times, and sometimes the standard deviation of the mean.
You can test with "cmd" (Windows Start button / type cmd in the search box, open "cmd.exe"), then with ping:
ping www.hotmail.com
If you try to ping a HTTP URL, such it follows:
ping http://www.hotmail.com
You will get the same error that you would get when trying to ping a HTTPS based URL:
ping https://www.hotmail.com
(An error something like that ping cant reach the requested address will appear on both attempts).
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
add a comment |
up vote
19
down vote
ping works at a much lower level than HTTP or HTTPS, and only accepts hostnames, not URLs. For example:
ping www.google.com
answered Aug 22 '11 at 13:35
grawity
230k35484544
add a comment |
up vote
5
down vote
tcping - simulate "ping" over tcp by establishing a connection to network hosts. tcping at application level will send SYN, waiting for ACK, closing with FIN ACK
C:>tcping google.com 443
Probing 87.106.83.127:443/tcp - Port is open - time=19.787ms
Probing 87.106.83.127:443/tcp - Port is open - time=20.487ms
Probing 87.106.83.127:443/tcp - Port is open - time=24.494ms
Control-C
Ping statistics for 87.106.83.127:443
3 probes sent.
3 successful, 0 failed.
Approximate trip times in milli-seconds:
Minimum = 19.787ms, Maximum = 24.494ms, Average = 21.589ms
edited Mar 28 '15 at 10:45
karel
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
add a comment |
up vote
2
down vote
You can issue a HEAD request with OpenSSL:
openssl s_client -quiet -connect github.com:443 <<eof
HEAD / HTTP/1.1
Connection: close
Host: github.com
eof
Note that you can also use "HTTP/2", but be careful because some servers
(e.g. github.com) do not support it.
answered Jan 22 at 19:17
Steven Penny
4,1101683133
add a comment |
protected by Community♦ Jun 30 '15 at 18:58
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
35
down vote
accepted
The answer to your question (Can you get a reply from a HTTPS site using the Ping command?) is Yes, you can, as long as ICMP replies are enabled on the HTTPS site provider. However, it has nothing to do with HTTP or HTTPS:
Ping will use ICMP protocol, it belongs to TCP/IP Internet Layer, which is a lower layer than HTTP or HTTPs (from Application Layer):
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP response. In the process it measures the time from transmission to reception (round-trip time)1 and records any packet loss. The results of the test are printed in form of a statistical summary of the response packets received, including the minimum, maximum, and the mean round-trip times, and sometimes the standard deviation of the mean.
You can test with "cmd" (Windows Start button / type cmd in the search box, open "cmd.exe"), then with ping:
ping www.hotmail.com
If you try to ping a HTTP URL, such it follows:
ping http://www.hotmail.com
You will get the same error that you would get when trying to ping a HTTPS based URL:
ping https://www.hotmail.com
(An error something like that ping cant reach the requested address will appear on both attempts).
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
add a comment |
up vote
35
down vote
accepted
The answer to your question (Can you get a reply from a HTTPS site using the Ping command?) is Yes, you can, as long as ICMP replies are enabled on the HTTPS site provider. However, it has nothing to do with HTTP or HTTPS:
Ping will use ICMP protocol, it belongs to TCP/IP Internet Layer, which is a lower layer than HTTP or HTTPs (from Application Layer):
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP response. In the process it measures the time from transmission to reception (round-trip time)1 and records any packet loss. The results of the test are printed in form of a statistical summary of the response packets received, including the minimum, maximum, and the mean round-trip times, and sometimes the standard deviation of the mean.
You can test with "cmd" (Windows Start button / type cmd in the search box, open "cmd.exe"), then with ping:
ping www.hotmail.com
If you try to ping a HTTP URL, such it follows:
ping http://www.hotmail.com
You will get the same error that you would get when trying to ping a HTTPS based URL:
ping https://www.hotmail.com
(An error something like that ping cant reach the requested address will appear on both attempts).
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
add a comment |
up vote
35
down vote
accepted
up vote
35
down vote
accepted
The answer to your question (Can you get a reply from a HTTPS site using the Ping command?) is Yes, you can, as long as ICMP replies are enabled on the HTTPS site provider. However, it has nothing to do with HTTP or HTTPS:
Ping will use ICMP protocol, it belongs to TCP/IP Internet Layer, which is a lower layer than HTTP or HTTPs (from Application Layer):
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP response. In the process it measures the time from transmission to reception (round-trip time)1 and records any packet loss. The results of the test are printed in form of a statistical summary of the response packets received, including the minimum, maximum, and the mean round-trip times, and sometimes the standard deviation of the mean.
You can test with "cmd" (Windows Start button / type cmd in the search box, open "cmd.exe"), then with ping:
ping www.hotmail.com
If you try to ping a HTTP URL, such it follows:
ping http://www.hotmail.com
You will get the same error that you would get when trying to ping a HTTPS based URL:
ping https://www.hotmail.com
(An error something like that ping cant reach the requested address will appear on both attempts).
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
The answer to your question (Can you get a reply from a HTTPS site using the Ping command?) is Yes, you can, as long as ICMP replies are enabled on the HTTPS site provider. However, it has nothing to do with HTTP or HTTPS:
Ping will use ICMP protocol, it belongs to TCP/IP Internet Layer, which is a lower layer than HTTP or HTTPs (from Application Layer):
Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to the target host and waiting for an ICMP response. In the process it measures the time from transmission to reception (round-trip time)1 and records any packet loss. The results of the test are printed in form of a statistical summary of the response packets received, including the minimum, maximum, and the mean round-trip times, and sometimes the standard deviation of the mean.
You can test with "cmd" (Windows Start button / type cmd in the search box, open "cmd.exe"), then with ping:
ping www.hotmail.com
If you try to ping a HTTP URL, such it follows:
ping http://www.hotmail.com
You will get the same error that you would get when trying to ping a HTTPS based URL:
ping https://www.hotmail.com
(An error something like that ping cant reach the requested address will appear on both attempts).
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
edited Nov 19 '17 at 13:19
Glorfindel
1,30841220
1,30841220
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
answered Aug 22 '11 at 13:42
Diogo
21.9k55132209
21.9k55132209
add a comment |
add a comment |
up vote
19
down vote
ping works at a much lower level than HTTP or HTTPS, and only accepts hostnames, not URLs. For example:
ping www.google.com
answered Aug 22 '11 at 13:35
grawity
230k35484544
add a comment |
up vote
19
down vote
ping works at a much lower level than HTTP or HTTPS, and only accepts hostnames, not URLs. For example:
ping www.google.com
answered Aug 22 '11 at 13:35
grawity
230k35484544
add a comment |
up vote
19
down vote
up vote
19
down vote
ping works at a much lower level than HTTP or HTTPS, and only accepts hostnames, not URLs. For example:
ping www.google.com
answered Aug 22 '11 at 13:35
grawity
230k35484544
ping works at a much lower level than HTTP or HTTPS, and only accepts hostnames, not URLs. For example:
ping www.google.com
answered Aug 22 '11 at 13:35
grawity
230k35484544
answered Aug 22 '11 at 13:35
grawity
230k35484544
answered Aug 22 '11 at 13:35
grawity
230k35484544
answered Aug 22 '11 at 13:35
grawity
230k35484544
230k35484544
add a comment |
add a comment |
up vote
5
down vote
tcping - simulate "ping" over tcp by establishing a connection to network hosts. tcping at application level will send SYN, waiting for ACK, closing with FIN ACK
C:>tcping google.com 443
Probing 87.106.83.127:443/tcp - Port is open - time=19.787ms
Probing 87.106.83.127:443/tcp - Port is open - time=20.487ms
Probing 87.106.83.127:443/tcp - Port is open - time=24.494ms
Control-C
Ping statistics for 87.106.83.127:443
3 probes sent.
3 successful, 0 failed.
Approximate trip times in milli-seconds:
Minimum = 19.787ms, Maximum = 24.494ms, Average = 21.589ms
edited Mar 28 '15 at 10:45
karel
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
add a comment |
up vote
5
down vote
tcping - simulate "ping" over tcp by establishing a connection to network hosts. tcping at application level will send SYN, waiting for ACK, closing with FIN ACK
C:>tcping google.com 443
Probing 87.106.83.127:443/tcp - Port is open - time=19.787ms
Probing 87.106.83.127:443/tcp - Port is open - time=20.487ms
Probing 87.106.83.127:443/tcp - Port is open - time=24.494ms
Control-C
Ping statistics for 87.106.83.127:443
3 probes sent.
3 successful, 0 failed.
Approximate trip times in milli-seconds:
Minimum = 19.787ms, Maximum = 24.494ms, Average = 21.589ms
edited Mar 28 '15 at 10:45
karel
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
add a comment |
up vote
5
down vote
up vote
5
down vote
tcping - simulate "ping" over tcp by establishing a connection to network hosts. tcping at application level will send SYN, waiting for ACK, closing with FIN ACK
C:>tcping google.com 443
Probing 87.106.83.127:443/tcp - Port is open - time=19.787ms
Probing 87.106.83.127:443/tcp - Port is open - time=20.487ms
Probing 87.106.83.127:443/tcp - Port is open - time=24.494ms
Control-C
Ping statistics for 87.106.83.127:443
3 probes sent.
3 successful, 0 failed.
Approximate trip times in milli-seconds:
Minimum = 19.787ms, Maximum = 24.494ms, Average = 21.589ms
edited Mar 28 '15 at 10:45
karel
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
tcping - simulate "ping" over tcp by establishing a connection to network hosts. tcping at application level will send SYN, waiting for ACK, closing with FIN ACK
C:>tcping google.com 443
Probing 87.106.83.127:443/tcp - Port is open - time=19.787ms
Probing 87.106.83.127:443/tcp - Port is open - time=20.487ms
Probing 87.106.83.127:443/tcp - Port is open - time=24.494ms
Control-C
Ping statistics for 87.106.83.127:443
3 probes sent.
3 successful, 0 failed.
Approximate trip times in milli-seconds:
Minimum = 19.787ms, Maximum = 24.494ms, Average = 21.589ms
edited Mar 28 '15 at 10:45
karel
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
edited Mar 28 '15 at 10:45
karel
9,17793138
edited Mar 28 '15 at 10:45
karel
9,17793138
edited Mar 28 '15 at 10:45
karel
9,17793138
9,17793138
answered Mar 28 '15 at 10:14
mdadm
5111
answered Mar 28 '15 at 10:14
mdadm
5111
answered Mar 28 '15 at 10:14
mdadm
5111
5111
add a comment |
add a comment |
up vote
2
down vote
You can issue a HEAD request with OpenSSL:
openssl s_client -quiet -connect github.com:443 <<eof
HEAD / HTTP/1.1
Connection: close
Host: github.com
eof
Note that you can also use "HTTP/2", but be careful because some servers
(e.g. github.com) do not support it.
answered Jan 22 at 19:17
Steven Penny
4,1101683133
add a comment |
up vote
2
down vote
You can issue a HEAD request with OpenSSL:
openssl s_client -quiet -connect github.com:443 <<eof
HEAD / HTTP/1.1
Connection: close
Host: github.com
eof
Note that you can also use "HTTP/2", but be careful because some servers
(e.g. github.com) do not support it.
answered Jan 22 at 19:17
Steven Penny
4,1101683133
add a comment |
up vote
2
down vote
up vote
2
down vote
You can issue a HEAD request with OpenSSL:
openssl s_client -quiet -connect github.com:443 <<eof
HEAD / HTTP/1.1
Connection: close
Host: github.com
eof
Note that you can also use "HTTP/2", but be careful because some servers
(e.g. github.com) do not support it.
answered Jan 22 at 19:17
Steven Penny
4,1101683133
You can issue a HEAD request with OpenSSL:
openssl s_client -quiet -connect github.com:443 <<eof
HEAD / HTTP/1.1
Connection: close
Host: github.com
eof
Note that you can also use "HTTP/2", but be careful because some servers
(e.g. github.com) do not support it.
answered Jan 22 at 19:17
Steven Penny
4,1101683133
edited Dec 3 at 18:00
answered Jan 22 at 19:17
Steven Penny
4,1101683133
answered Jan 22 at 19:17
Steven Penny
4,1101683133
answered Jan 22 at 19:17
Steven Penny
4,1101683133
4,1101683133
add a comment |
add a comment |
protected by Community♦ Jun 30 '15 at 18:58
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
6
Short answer: Ping and HTTPS have nothing in common. Ping is a low level network tool whereas HTTPS is an application layer protocol (or rather, an URI scheme).
– slhck
Aug 22 '11 at 13:35
4
If you want to test that you ssl site is responding correctly use openssl this way: "openssl s_client -connect google.com:443" Then you can issue a GET command followed by two presses on the return key like this: "GET / HTTP/1.1"
– Shadok
Aug 22 '11 at 14:03
In case anybody ended up here looking for a ping-like tool for https, I just wrote one: github.com/voutasaurus/sup
– voutasaurus
May 6 '16 at 0:02