Remote Desktop Dropouts: “Because of an error in data encryption, this session will end.”











up vote
3
down vote

favorite
1












I'm getting some strange connection problems when trying to remote desktop to a Vista box. It connects and works for a while then disconnects with the following message:




"Because of an error in data encryption, this session will end. Please try connecting to the remote computer again."




Any help would be great!










share|improve this question






















  • Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
    – boot13
    Sep 2 '10 at 1:26










  • @boot13 The connection is via a VPN over the Internet.
    – Luke Quinane
    Sep 2 '10 at 1:40










  • Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
    – boot13
    Sep 2 '10 at 5:22















up vote
3
down vote

favorite
1












I'm getting some strange connection problems when trying to remote desktop to a Vista box. It connects and works for a while then disconnects with the following message:




"Because of an error in data encryption, this session will end. Please try connecting to the remote computer again."




Any help would be great!










share|improve this question






















  • Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
    – boot13
    Sep 2 '10 at 1:26










  • @boot13 The connection is via a VPN over the Internet.
    – Luke Quinane
    Sep 2 '10 at 1:40










  • Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
    – boot13
    Sep 2 '10 at 5:22













up vote
3
down vote

favorite
1









up vote
3
down vote

favorite
1






1





I'm getting some strange connection problems when trying to remote desktop to a Vista box. It connects and works for a while then disconnects with the following message:




"Because of an error in data encryption, this session will end. Please try connecting to the remote computer again."




Any help would be great!










share|improve this question













I'm getting some strange connection problems when trying to remote desktop to a Vista box. It connects and works for a while then disconnects with the following message:




"Because of an error in data encryption, this session will end. Please try connecting to the remote computer again."




Any help would be great!







windows-vista remote-desktop






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Sep 1 '10 at 23:46









Luke Quinane

292716




292716












  • Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
    – boot13
    Sep 2 '10 at 1:26










  • @boot13 The connection is via a VPN over the Internet.
    – Luke Quinane
    Sep 2 '10 at 1:40










  • Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
    – boot13
    Sep 2 '10 at 5:22


















  • Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
    – boot13
    Sep 2 '10 at 1:26










  • @boot13 The connection is via a VPN over the Internet.
    – Luke Quinane
    Sep 2 '10 at 1:40










  • Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
    – boot13
    Sep 2 '10 at 5:22
















Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
– boot13
Sep 2 '10 at 1:26




Are the two machines on the same LAN or are you connecting across a router, the Internet, etc?
– boot13
Sep 2 '10 at 1:26












@boot13 The connection is via a VPN over the Internet.
– Luke Quinane
Sep 2 '10 at 1:40




@boot13 The connection is via a VPN over the Internet.
– Luke Quinane
Sep 2 '10 at 1:40












Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
– boot13
Sep 2 '10 at 5:22




Ah. Which VPN client are you using? You might want to read any documentation you can find on that client, looking for notes on using RDP. You could also use it to narrow down your search. Anyway, from what I've seen so far, this is one of those weird problems that a few people are having but nobody knows how to resolve (+1).
– boot13
Sep 2 '10 at 5:22










3 Answers
3






active

oldest

votes

















up vote
0
down vote













From this thread, http://www.techzonez.com/forums/archive/index.php/t-9868.html, it sounds like you may have your Vista computer setup in the router as the DMZ. Other suggestions are to delete any network protocols except the basics to see if that fixes it.



Hope this helps






share|improve this answer





















  • the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
    – Luke Quinane
    Sep 2 '10 at 1:16


















up vote
0
down vote













These answers are not correct, you can fix this by Simply uninstalling the Link-Layer Topology (Mapper I/O Driver and Responder) protocols, as well as the QoS Packet Scheduler service (you can add them back again afterwards) in the Local Area Connection of the client machine (not the server/target). You must uninstall, not simply remove the checkmark next to the protocol or service.






share|improve this answer

















  • 1




    Anything to back that up?
    – Canadian Luke
    Jul 31 '13 at 22:25










  • I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
    – wandersick
    Sep 15 '17 at 6:48


















up vote
0
down vote













My issue was resolved by starting the Link-Layer Topology service. It was previously set to Manual and was not started after I had reinstalled Windows 7.






share|improve this answer

















  • 2




    Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
    – Twisty Impersonator
    Dec 17 '14 at 21:05











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














 

draft saved


draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f183661%2fremote-desktop-dropouts-because-of-an-error-in-data-encryption-this-session-w%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























3 Answers
3






active

oldest

votes








3 Answers
3






active

oldest

votes









active

oldest

votes






active

oldest

votes








up vote
0
down vote













From this thread, http://www.techzonez.com/forums/archive/index.php/t-9868.html, it sounds like you may have your Vista computer setup in the router as the DMZ. Other suggestions are to delete any network protocols except the basics to see if that fixes it.



Hope this helps






share|improve this answer





















  • the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
    – Luke Quinane
    Sep 2 '10 at 1:16















up vote
0
down vote













From this thread, http://www.techzonez.com/forums/archive/index.php/t-9868.html, it sounds like you may have your Vista computer setup in the router as the DMZ. Other suggestions are to delete any network protocols except the basics to see if that fixes it.



Hope this helps






share|improve this answer





















  • the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
    – Luke Quinane
    Sep 2 '10 at 1:16













up vote
0
down vote










up vote
0
down vote









From this thread, http://www.techzonez.com/forums/archive/index.php/t-9868.html, it sounds like you may have your Vista computer setup in the router as the DMZ. Other suggestions are to delete any network protocols except the basics to see if that fixes it.



Hope this helps






share|improve this answer












From this thread, http://www.techzonez.com/forums/archive/index.php/t-9868.html, it sounds like you may have your Vista computer setup in the router as the DMZ. Other suggestions are to delete any network protocols except the basics to see if that fixes it.



Hope this helps







share|improve this answer












share|improve this answer



share|improve this answer










answered Sep 2 '10 at 0:13









wbeard52

2,71822238




2,71822238












  • the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
    – Luke Quinane
    Sep 2 '10 at 1:16


















  • the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
    – Luke Quinane
    Sep 2 '10 at 1:16
















the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
– Luke Quinane
Sep 2 '10 at 1:16




the remote computer is just connected to a basic switch, no DMZ setting. Both local and remote PCs only have IPv4 and IPv6.
– Luke Quinane
Sep 2 '10 at 1:16












up vote
0
down vote













These answers are not correct, you can fix this by Simply uninstalling the Link-Layer Topology (Mapper I/O Driver and Responder) protocols, as well as the QoS Packet Scheduler service (you can add them back again afterwards) in the Local Area Connection of the client machine (not the server/target). You must uninstall, not simply remove the checkmark next to the protocol or service.






share|improve this answer

















  • 1




    Anything to back that up?
    – Canadian Luke
    Jul 31 '13 at 22:25










  • I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
    – wandersick
    Sep 15 '17 at 6:48















up vote
0
down vote













These answers are not correct, you can fix this by Simply uninstalling the Link-Layer Topology (Mapper I/O Driver and Responder) protocols, as well as the QoS Packet Scheduler service (you can add them back again afterwards) in the Local Area Connection of the client machine (not the server/target). You must uninstall, not simply remove the checkmark next to the protocol or service.






share|improve this answer

















  • 1




    Anything to back that up?
    – Canadian Luke
    Jul 31 '13 at 22:25










  • I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
    – wandersick
    Sep 15 '17 at 6:48













up vote
0
down vote










up vote
0
down vote









These answers are not correct, you can fix this by Simply uninstalling the Link-Layer Topology (Mapper I/O Driver and Responder) protocols, as well as the QoS Packet Scheduler service (you can add them back again afterwards) in the Local Area Connection of the client machine (not the server/target). You must uninstall, not simply remove the checkmark next to the protocol or service.






share|improve this answer












These answers are not correct, you can fix this by Simply uninstalling the Link-Layer Topology (Mapper I/O Driver and Responder) protocols, as well as the QoS Packet Scheduler service (you can add them back again afterwards) in the Local Area Connection of the client machine (not the server/target). You must uninstall, not simply remove the checkmark next to the protocol or service.







share|improve this answer












share|improve this answer



share|improve this answer










answered Jul 31 '13 at 21:45









Nightdiver

1




1








  • 1




    Anything to back that up?
    – Canadian Luke
    Jul 31 '13 at 22:25










  • I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
    – wandersick
    Sep 15 '17 at 6:48














  • 1




    Anything to back that up?
    – Canadian Luke
    Jul 31 '13 at 22:25










  • I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
    – wandersick
    Sep 15 '17 at 6:48








1




1




Anything to back that up?
– Canadian Luke
Jul 31 '13 at 22:25




Anything to back that up?
– Canadian Luke
Jul 31 '13 at 22:25












I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
– wandersick
Sep 15 '17 at 6:48




I am not the one who answered but I found the reference here from a comment made by "Garth Rautenbach": social.technet.microsoft.com/Forums/windowsserver/en-US/…
– wandersick
Sep 15 '17 at 6:48










up vote
0
down vote













My issue was resolved by starting the Link-Layer Topology service. It was previously set to Manual and was not started after I had reinstalled Windows 7.






share|improve this answer

















  • 2




    Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
    – Twisty Impersonator
    Dec 17 '14 at 21:05















up vote
0
down vote













My issue was resolved by starting the Link-Layer Topology service. It was previously set to Manual and was not started after I had reinstalled Windows 7.






share|improve this answer

















  • 2




    Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
    – Twisty Impersonator
    Dec 17 '14 at 21:05













up vote
0
down vote










up vote
0
down vote









My issue was resolved by starting the Link-Layer Topology service. It was previously set to Manual and was not started after I had reinstalled Windows 7.






share|improve this answer












My issue was resolved by starting the Link-Layer Topology service. It was previously set to Manual and was not started after I had reinstalled Windows 7.







share|improve this answer












share|improve this answer



share|improve this answer










answered Dec 17 '14 at 21:02









Jaszucs

1




1








  • 2




    Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
    – Twisty Impersonator
    Dec 17 '14 at 21:05














  • 2




    Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
    – Twisty Impersonator
    Dec 17 '14 at 21:05








2




2




Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
– Twisty Impersonator
Dec 17 '14 at 21:05




Welcome to SuperUser. Your answer would be even better if you edit it to provide some explanation as to why your solution addresses the OPs question.
– Twisty Impersonator
Dec 17 '14 at 21:05


















 

draft saved


draft discarded



















































 


draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f183661%2fremote-desktop-dropouts-because-of-an-error-in-data-encryption-this-session-w%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Aardman Animations

Are they similar matrix