Printer/Scanner over Network: Windows sees it for printing, but not for scanning
up vote
0
down vote
favorite
I set up my SCX-4623 Samsung printer by plugging the USB cable into my router. From there, I used these instructions to have Windows 10 be able to print to it over the network.
This works beautifully, over both wired (PCs) and wireless (laptop) connections. However, when I try to use Windows Fax & Scan in order to use the scanner, Windows claims that there aren't any scanners available:
Is there anything I can do to coax Windows into believing that the scanner, in fact, exists? The scanner works fine if I take the USB cable and connect the printer directly to the PC/laptop. But over the network it's a no-go.
windows-10 printer lan network-printer scanner
asked Jun 13 '17 at 15:45
Scott
41711023
add a comment |
up vote
0
down vote
favorite
I set up my SCX-4623 Samsung printer by plugging the USB cable into my router. From there, I used these instructions to have Windows 10 be able to print to it over the network.
This works beautifully, over both wired (PCs) and wireless (laptop) connections. However, when I try to use Windows Fax & Scan in order to use the scanner, Windows claims that there aren't any scanners available:
Is there anything I can do to coax Windows into believing that the scanner, in fact, exists? The scanner works fine if I take the USB cable and connect the printer directly to the PC/laptop. But over the network it's a no-go.
windows-10 printer lan network-printer scanner
asked Jun 13 '17 at 15:45
Scott
41711023
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
1
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
1
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I set up my SCX-4623 Samsung printer by plugging the USB cable into my router. From there, I used these instructions to have Windows 10 be able to print to it over the network.
This works beautifully, over both wired (PCs) and wireless (laptop) connections. However, when I try to use Windows Fax & Scan in order to use the scanner, Windows claims that there aren't any scanners available:
Is there anything I can do to coax Windows into believing that the scanner, in fact, exists? The scanner works fine if I take the USB cable and connect the printer directly to the PC/laptop. But over the network it's a no-go.
windows-10 printer lan network-printer scanner
asked Jun 13 '17 at 15:45
Scott
41711023
I set up my SCX-4623 Samsung printer by plugging the USB cable into my router. From there, I used these instructions to have Windows 10 be able to print to it over the network.
This works beautifully, over both wired (PCs) and wireless (laptop) connections. However, when I try to use Windows Fax & Scan in order to use the scanner, Windows claims that there aren't any scanners available:
Is there anything I can do to coax Windows into believing that the scanner, in fact, exists? The scanner works fine if I take the USB cable and connect the printer directly to the PC/laptop. But over the network it's a no-go.
windows-10 printer lan network-printer scanner
windows-10 printer lan network-printer scanner
asked Jun 13 '17 at 15:45
Scott
41711023
asked Jun 13 '17 at 15:45
Scott
41711023
edited Jun 13 '17 at 17:05
asked Jun 13 '17 at 15:45
Scott
41711023
asked Jun 13 '17 at 15:45
Scott
41711023
asked Jun 13 '17 at 15:45
Scott
41711023
41711023
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
1
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
1
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09
add a comment |
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
1
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
1
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
1
1
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
1
1
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09
add a comment |
2 Answers
2
active
oldest
votes
up vote
0
down vote
Probably your printer does not support remote scanning. Most printers does not have remote scanner capabilities unless, there is an instruction on manual.
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
add a comment |
up vote
0
down vote
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it from the host computer and install it on the client computers.
Just installing the shared printer will NOT provide the scanning capability of that piece of equipment.
Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this. Unless your scanner specifically states that it supports scanning over a network connection or share, it probably cannot do this.
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Probably your printer does not support remote scanning. Most printers does not have remote scanner capabilities unless, there is an instruction on manual.
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
add a comment |
up vote
0
down vote
Probably your printer does not support remote scanning. Most printers does not have remote scanner capabilities unless, there is an instruction on manual.
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
add a comment |
up vote
0
down vote
up vote
0
down vote
Probably your printer does not support remote scanning. Most printers does not have remote scanner capabilities unless, there is an instruction on manual.
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
Probably your printer does not support remote scanning. Most printers does not have remote scanner capabilities unless, there is an instruction on manual.
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
answered Jun 13 '17 at 15:57
Mukesh Jagani
1793
1793
add a comment |
add a comment |
up vote
0
down vote
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it from the host computer and install it on the client computers.
Just installing the shared printer will NOT provide the scanning capability of that piece of equipment.
Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this. Unless your scanner specifically states that it supports scanning over a network connection or share, it probably cannot do this.
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
add a comment |
up vote
0
down vote
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it from the host computer and install it on the client computers.
Just installing the shared printer will NOT provide the scanning capability of that piece of equipment.
Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this. Unless your scanner specifically states that it supports scanning over a network connection or share, it probably cannot do this.
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
add a comment |
up vote
0
down vote
up vote
0
down vote
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it from the host computer and install it on the client computers.
Just installing the shared printer will NOT provide the scanning capability of that piece of equipment.
Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this. Unless your scanner specifically states that it supports scanning over a network connection or share, it probably cannot do this.
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it from the host computer and install it on the client computers.
Just installing the shared printer will NOT provide the scanning capability of that piece of equipment.
Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this. Unless your scanner specifically states that it supports scanning over a network connection or share, it probably cannot do this.
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
answered Jun 13 '17 at 16:00
music2myear
30.4k75595
30.4k75595
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1218858%2fprinter-scanner-over-network-windows-sees-it-for-printing-but-not-for-scanning%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
The printer and the scanner are, to the computer, two different devices. If you wish to access the scanner over the network you must share it. Also, many scanners do not support scanning over the network. Most scanners you purchase at the store are not capable of this.
– music2myear
Jun 13 '17 at 15:57
1
Can you put the correct printer make and model... doing a search for what you've written doesn't result in a printer/scanner so I'm not sure the printer you're using... I wonder if it's related tot he fact the device is connected via USB to your router. I also wonder if you may need to install the printer/scanner software as there is no real "open" network scanner protocol apart from TWAIN but your scanner manufacturer would probably have a proprietary connectivity where their software can communicate with the scanner better than using Windows built-in functionality. Samsung aren't easy.
– Kinnectus
Jun 13 '17 at 16:05
Are there any options for scanning on the device itself? For instance, my home printer/scanner gives me the option to choose what network device to scan too, from the scanner. I have an HP program for my printer/scanner that opens on the selected computer I have scanned to.
– Eric W.
Jun 13 '17 at 16:22
@Kinnectus done. I put the router model in by mistake. The printer model is updated now (It's an SCX-4623).
– Scott
Jun 13 '17 at 17:05
1
According to samsung.com/us/support/answer/ANS00043750 you have a software installed called "Samsung Scan and Fax Manager" - this should allow your computer to see and use the network scan functionality - it should scan your network and find your device. I've experienced Samsung network scan devices before and they're quite hideous (much like many other manufacturers, in all honesty) and they all tend to use some proprietary protocol or function to perform network scanning.
– Kinnectus
Jun 13 '17 at 17:09