new ssd wont show in disk management












2















I recently bought a new Kingston 120GB 2.5" SSD (SA400S37/120), to add to my motherboard, an Asus - H81M-K Micro ATX (hardware manual) with two 6G SATA-III ports (yellow) and two 3G SATA ports (dark brown).



When I boot into Windows 10 from my 1 TB HDD on one of my two (yellow) 6G SATA-III ports, the new Kingston SSD connected to another, 3G SATA port (brown) does not show in Windows Explorer. I tried initializing it in the disk management software but it doesn't appear.



It shows in Device Manager, and when i go into the BIOS Setup. diskpart in the console doesn't show the Kingston drive.



My friend said I had to set the drive to a slave drive, but I cannot find that in the BIOS of my motherboard, an Asus - H81M-K.



EDIT: Yes, it shows an SSD, but I forgot to mention I already have a M.2 SSD which is plugged into a SSD-to-SATA adapter, connected to the other yellow 6G SATA port. The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports.



EDIT: i realized that my m.2 and 1tb HDD are connected to the yellow ports on my motherboard so what i have done is swap the m.2 to the brown port and plug the SSD into the yellow port, i have just booted back into windows with the same results, i managed to document everything with screenshots so i will post them now.



device managerwindows explorerbios screenshotDisk Managementdisk util after boot










share|improve this question

























  • Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

    – K7AAY
    Feb 26 at 22:38













  • "The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

    – Ramhound
    Feb 26 at 22:51











  • amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

    – K7AAY
    Feb 26 at 22:52











  • i have added some photos and explained more in the edit part of my post

    – Ben W
    Feb 26 at 23:23
















2















I recently bought a new Kingston 120GB 2.5" SSD (SA400S37/120), to add to my motherboard, an Asus - H81M-K Micro ATX (hardware manual) with two 6G SATA-III ports (yellow) and two 3G SATA ports (dark brown).



When I boot into Windows 10 from my 1 TB HDD on one of my two (yellow) 6G SATA-III ports, the new Kingston SSD connected to another, 3G SATA port (brown) does not show in Windows Explorer. I tried initializing it in the disk management software but it doesn't appear.



It shows in Device Manager, and when i go into the BIOS Setup. diskpart in the console doesn't show the Kingston drive.



My friend said I had to set the drive to a slave drive, but I cannot find that in the BIOS of my motherboard, an Asus - H81M-K.



EDIT: Yes, it shows an SSD, but I forgot to mention I already have a M.2 SSD which is plugged into a SSD-to-SATA adapter, connected to the other yellow 6G SATA port. The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports.



EDIT: i realized that my m.2 and 1tb HDD are connected to the yellow ports on my motherboard so what i have done is swap the m.2 to the brown port and plug the SSD into the yellow port, i have just booted back into windows with the same results, i managed to document everything with screenshots so i will post them now.



device managerwindows explorerbios screenshotDisk Managementdisk util after boot










share|improve this question

























  • Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

    – K7AAY
    Feb 26 at 22:38













  • "The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

    – Ramhound
    Feb 26 at 22:51











  • amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

    – K7AAY
    Feb 26 at 22:52











  • i have added some photos and explained more in the edit part of my post

    – Ben W
    Feb 26 at 23:23














2












2








2


1






I recently bought a new Kingston 120GB 2.5" SSD (SA400S37/120), to add to my motherboard, an Asus - H81M-K Micro ATX (hardware manual) with two 6G SATA-III ports (yellow) and two 3G SATA ports (dark brown).



When I boot into Windows 10 from my 1 TB HDD on one of my two (yellow) 6G SATA-III ports, the new Kingston SSD connected to another, 3G SATA port (brown) does not show in Windows Explorer. I tried initializing it in the disk management software but it doesn't appear.



It shows in Device Manager, and when i go into the BIOS Setup. diskpart in the console doesn't show the Kingston drive.



My friend said I had to set the drive to a slave drive, but I cannot find that in the BIOS of my motherboard, an Asus - H81M-K.



EDIT: Yes, it shows an SSD, but I forgot to mention I already have a M.2 SSD which is plugged into a SSD-to-SATA adapter, connected to the other yellow 6G SATA port. The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports.



EDIT: i realized that my m.2 and 1tb HDD are connected to the yellow ports on my motherboard so what i have done is swap the m.2 to the brown port and plug the SSD into the yellow port, i have just booted back into windows with the same results, i managed to document everything with screenshots so i will post them now.



device managerwindows explorerbios screenshotDisk Managementdisk util after boot










share|improve this question
















I recently bought a new Kingston 120GB 2.5" SSD (SA400S37/120), to add to my motherboard, an Asus - H81M-K Micro ATX (hardware manual) with two 6G SATA-III ports (yellow) and two 3G SATA ports (dark brown).



When I boot into Windows 10 from my 1 TB HDD on one of my two (yellow) 6G SATA-III ports, the new Kingston SSD connected to another, 3G SATA port (brown) does not show in Windows Explorer. I tried initializing it in the disk management software but it doesn't appear.



It shows in Device Manager, and when i go into the BIOS Setup. diskpart in the console doesn't show the Kingston drive.



My friend said I had to set the drive to a slave drive, but I cannot find that in the BIOS of my motherboard, an Asus - H81M-K.



EDIT: Yes, it shows an SSD, but I forgot to mention I already have a M.2 SSD which is plugged into a SSD-to-SATA adapter, connected to the other yellow 6G SATA port. The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports.



EDIT: i realized that my m.2 and 1tb HDD are connected to the yellow ports on my motherboard so what i have done is swap the m.2 to the brown port and plug the SSD into the yellow port, i have just booted back into windows with the same results, i managed to document everything with screenshots so i will post them now.



device managerwindows explorerbios screenshotDisk Managementdisk util after boot







hard-drive ssd desktop-computer computer-building disk-management






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 26 at 22:59







Ben W

















asked Feb 26 at 21:32









Ben WBen W

112




112













  • Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

    – K7AAY
    Feb 26 at 22:38













  • "The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

    – Ramhound
    Feb 26 at 22:51











  • amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

    – K7AAY
    Feb 26 at 22:52











  • i have added some photos and explained more in the edit part of my post

    – Ben W
    Feb 26 at 23:23



















  • Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

    – K7AAY
    Feb 26 at 22:38













  • "The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

    – Ramhound
    Feb 26 at 22:51











  • amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

    – K7AAY
    Feb 26 at 22:52











  • i have added some photos and explained more in the edit part of my post

    – Ben W
    Feb 26 at 23:23

















Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

– K7AAY
Feb 26 at 22:38







Good test. Try it, and let's find out. Also suggest you delete the Comments you made above; do you see how I added their data into the original question with edit? This board has limited room for comments, which is why I delete mine once you answer.

– K7AAY
Feb 26 at 22:38















"The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

– Ramhound
Feb 26 at 22:51





"The Kingston 2.5" SSD I'm trying to install doesn't appear; it is connected to one of the (brown) SATA 3G ports." - This sounds like a case where only a certain amount of SATA ports can be used. Check your motherboard manual for any such limitation.

– Ramhound
Feb 26 at 22:51













amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

– K7AAY
Feb 26 at 22:52





amazon.com/Lycom-DT-120-PCIe-Adapter-Support/dp/B00MYCQP38 and similar devices let you move the M.2 off the yellow 6GB/s port. Since you only have two of those, such a card may be helpful.

– K7AAY
Feb 26 at 22:52













i have added some photos and explained more in the edit part of my post

– Ben W
Feb 26 at 23:23





i have added some photos and explained more in the edit part of my post

– Ben W
Feb 26 at 23:23










0






active

oldest

votes












Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1409700%2fnew-ssd-wont-show-in-disk-management%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Super User!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1409700%2fnew-ssd-wont-show-in-disk-management%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

How do I know what Microsoft account the skydrive app is syncing to?

When does type information flow backwards in C++?

Grease: Live!