How can I recover a Mac-formatted external hard drive?
My girlfriend has an external hard drive with a bunch of photos on it from her Mac. She needed to transfer the files to her PC but we soon discovered that Macs and PCs use different formatting standards for hard drives. Initially, after plugging in the external hard drive to the PC, I ran diskmgmt.msc to make sure the computer was seeing it (since it wasn't showing up under My Computer), and indeed it did - but Windows prompted me to specify which type of file system it was. I don't remember exactly what the two options it presented were but I chose whatever the default option was. I believe it started with a G. It was only later that I learned I'd have to use third-party software to do it.
Now I'm worried that by simply telling Windows to choose one of those two file systems, it may have actually made some real changes to the disk's partition scheme, rendering it a brick. Because now when we go back to plug the drive into the Mac, this message pops up:
The disk you inserted is not readable by this computer.
Is it possible that Window's disk manager actually changed the partitions when I told it to expect a certain type of file system? Is there any way I can get this drive working on a Mac again?
hard-drive external-disk
edited Feb 17 at 10:03
IconDaemon
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
add a comment |
My girlfriend has an external hard drive with a bunch of photos on it from her Mac. She needed to transfer the files to her PC but we soon discovered that Macs and PCs use different formatting standards for hard drives. Initially, after plugging in the external hard drive to the PC, I ran diskmgmt.msc to make sure the computer was seeing it (since it wasn't showing up under My Computer), and indeed it did - but Windows prompted me to specify which type of file system it was. I don't remember exactly what the two options it presented were but I chose whatever the default option was. I believe it started with a G. It was only later that I learned I'd have to use third-party software to do it.
Now I'm worried that by simply telling Windows to choose one of those two file systems, it may have actually made some real changes to the disk's partition scheme, rendering it a brick. Because now when we go back to plug the drive into the Mac, this message pops up:
The disk you inserted is not readable by this computer.
Is it possible that Window's disk manager actually changed the partitions when I told it to expect a certain type of file system? Is there any way I can get this drive working on a Mac again?
hard-drive external-disk
edited Feb 17 at 10:03
IconDaemon
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
add a comment |
My girlfriend has an external hard drive with a bunch of photos on it from her Mac. She needed to transfer the files to her PC but we soon discovered that Macs and PCs use different formatting standards for hard drives. Initially, after plugging in the external hard drive to the PC, I ran diskmgmt.msc to make sure the computer was seeing it (since it wasn't showing up under My Computer), and indeed it did - but Windows prompted me to specify which type of file system it was. I don't remember exactly what the two options it presented were but I chose whatever the default option was. I believe it started with a G. It was only later that I learned I'd have to use third-party software to do it.
Now I'm worried that by simply telling Windows to choose one of those two file systems, it may have actually made some real changes to the disk's partition scheme, rendering it a brick. Because now when we go back to plug the drive into the Mac, this message pops up:
The disk you inserted is not readable by this computer.
Is it possible that Window's disk manager actually changed the partitions when I told it to expect a certain type of file system? Is there any way I can get this drive working on a Mac again?
hard-drive external-disk
edited Feb 17 at 10:03
IconDaemon
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
My girlfriend has an external hard drive with a bunch of photos on it from her Mac. She needed to transfer the files to her PC but we soon discovered that Macs and PCs use different formatting standards for hard drives. Initially, after plugging in the external hard drive to the PC, I ran diskmgmt.msc to make sure the computer was seeing it (since it wasn't showing up under My Computer), and indeed it did - but Windows prompted me to specify which type of file system it was. I don't remember exactly what the two options it presented were but I chose whatever the default option was. I believe it started with a G. It was only later that I learned I'd have to use third-party software to do it.
Now I'm worried that by simply telling Windows to choose one of those two file systems, it may have actually made some real changes to the disk's partition scheme, rendering it a brick. Because now when we go back to plug the drive into the Mac, this message pops up:
The disk you inserted is not readable by this computer.
Is it possible that Window's disk manager actually changed the partitions when I told it to expect a certain type of file system? Is there any way I can get this drive working on a Mac again?
hard-drive external-disk
hard-drive external-disk
edited Feb 17 at 10:03
IconDaemon
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
edited Feb 17 at 10:03
IconDaemon
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
edited Feb 17 at 10:03
IconDaemon
12.4k62843
edited Feb 17 at 10:03
IconDaemon
12.4k62843
edited Feb 17 at 10:03
IconDaemon
12.4k62843
12.4k62843
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
asked Feb 16 at 20:35
Gordon MyersGordon Myers
1701210
1701210
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Windows prompted me to specify which type of file system it was...
Windows disk management console doesn't ask you to tell it what type of file system it, it asks you what file system you want to write to it.
Is there any way I can get this drive working on a Mac again?
- Don't attempt to write anything to the disk
Duplicate the drive to an image on her Mac (it doesn't matter if it's readable or not) using the following command where X is the drive identifier of your source (corrupted) drive.
$sudo dd if=/dev/rdiskX of=~/Desktop/USB_Drive.img bs=1m
Using a tool like Disk Drill or Disk Warrior, see if data can be recovered. It's free to diagnose, but you'll have to purchase a license to actually recover the data.
You don't have to make an image - that step is optional. However, if you attempt to make changes and it fails, you still have the original from which to make another image and try again.
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to bebs=1mwith a lowercase "m" otherwise the commands gives an error.
– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
add a comment |
Windows cannot read HFS+. You need to either get third party drivers (like Paragon HFS+) for it or use a Mac. If you did format your disk, your data is gone. There's no such thing as telling Windows to expect a filesystem; you probably formatted it. If you only assigned a letter to it, the data should still be intact.
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "118"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fapple.stackexchange.com%2fquestions%2f351637%2fhow-can-i-recover-a-mac-formatted-external-hard-drive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Windows prompted me to specify which type of file system it was...
Windows disk management console doesn't ask you to tell it what type of file system it, it asks you what file system you want to write to it.
Is there any way I can get this drive working on a Mac again?
- Don't attempt to write anything to the disk
Duplicate the drive to an image on her Mac (it doesn't matter if it's readable or not) using the following command where X is the drive identifier of your source (corrupted) drive.
$sudo dd if=/dev/rdiskX of=~/Desktop/USB_Drive.img bs=1m
Using a tool like Disk Drill or Disk Warrior, see if data can be recovered. It's free to diagnose, but you'll have to purchase a license to actually recover the data.
You don't have to make an image - that step is optional. However, if you attempt to make changes and it fails, you still have the original from which to make another image and try again.
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to bebs=1mwith a lowercase "m" otherwise the commands gives an error.
– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
add a comment |
Windows prompted me to specify which type of file system it was...
Windows disk management console doesn't ask you to tell it what type of file system it, it asks you what file system you want to write to it.
Is there any way I can get this drive working on a Mac again?
- Don't attempt to write anything to the disk
Duplicate the drive to an image on her Mac (it doesn't matter if it's readable or not) using the following command where X is the drive identifier of your source (corrupted) drive.
$sudo dd if=/dev/rdiskX of=~/Desktop/USB_Drive.img bs=1m
Using a tool like Disk Drill or Disk Warrior, see if data can be recovered. It's free to diagnose, but you'll have to purchase a license to actually recover the data.
You don't have to make an image - that step is optional. However, if you attempt to make changes and it fails, you still have the original from which to make another image and try again.
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to bebs=1mwith a lowercase "m" otherwise the commands gives an error.
– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
add a comment |
Windows prompted me to specify which type of file system it was...
Windows disk management console doesn't ask you to tell it what type of file system it, it asks you what file system you want to write to it.
Is there any way I can get this drive working on a Mac again?
- Don't attempt to write anything to the disk
Duplicate the drive to an image on her Mac (it doesn't matter if it's readable or not) using the following command where X is the drive identifier of your source (corrupted) drive.
$sudo dd if=/dev/rdiskX of=~/Desktop/USB_Drive.img bs=1m
Using a tool like Disk Drill or Disk Warrior, see if data can be recovered. It's free to diagnose, but you'll have to purchase a license to actually recover the data.
You don't have to make an image - that step is optional. However, if you attempt to make changes and it fails, you still have the original from which to make another image and try again.
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
Windows prompted me to specify which type of file system it was...
Windows disk management console doesn't ask you to tell it what type of file system it, it asks you what file system you want to write to it.
Is there any way I can get this drive working on a Mac again?
- Don't attempt to write anything to the disk
Duplicate the drive to an image on her Mac (it doesn't matter if it's readable or not) using the following command where X is the drive identifier of your source (corrupted) drive.
$sudo dd if=/dev/rdiskX of=~/Desktop/USB_Drive.img bs=1m
Using a tool like Disk Drill or Disk Warrior, see if data can be recovered. It's free to diagnose, but you'll have to purchase a license to actually recover the data.
You don't have to make an image - that step is optional. However, if you attempt to make changes and it fails, you still have the original from which to make another image and try again.
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
edited Feb 17 at 0:42
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
answered Feb 16 at 22:59
AllanAllan
45.6k1467172
45.6k1467172
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to bebs=1mwith a lowercase "m" otherwise the commands gives an error.
– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
add a comment |
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to bebs=1mwith a lowercase "m" otherwise the commands gives an error.
– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to be
bs=1m with a lowercase "m" otherwise the commands gives an error.– Gordon Myers
Feb 17 at 0:37
Thank you so much! I will give this a shot. I'm copying the disk image right now, which will take some time. By the way, it has to be
bs=1m with a lowercase "m" otherwise the commands gives an error.– Gordon Myers
Feb 17 at 0:37
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
@GordonMyers - Sorry for the typo....fixed!
– Allan
Feb 17 at 0:43
add a comment |
Windows cannot read HFS+. You need to either get third party drivers (like Paragon HFS+) for it or use a Mac. If you did format your disk, your data is gone. There's no such thing as telling Windows to expect a filesystem; you probably formatted it. If you only assigned a letter to it, the data should still be intact.
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
add a comment |
Windows cannot read HFS+. You need to either get third party drivers (like Paragon HFS+) for it or use a Mac. If you did format your disk, your data is gone. There's no such thing as telling Windows to expect a filesystem; you probably formatted it. If you only assigned a letter to it, the data should still be intact.
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
add a comment |
Windows cannot read HFS+. You need to either get third party drivers (like Paragon HFS+) for it or use a Mac. If you did format your disk, your data is gone. There's no such thing as telling Windows to expect a filesystem; you probably formatted it. If you only assigned a letter to it, the data should still be intact.
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
Windows cannot read HFS+. You need to either get third party drivers (like Paragon HFS+) for it or use a Mac. If you did format your disk, your data is gone. There's no such thing as telling Windows to expect a filesystem; you probably formatted it. If you only assigned a letter to it, the data should still be intact.
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
answered Feb 16 at 22:17
pixelomerpixelomer
1,4981319
1,4981319
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
add a comment |
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
Generally agree with your answer, but formatting a disk doesn’t necessarily mean the data is gone. In many cases it just means the data is still there but the computer has no record of it. In such cases the data can be recovered using 3rd party software for data recovery or for rebuilding the drive’s directory.
– Monomeeth♦
Feb 16 at 23:38
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
“In many cases”... same chance as heads or tails....
– Solar Mike
Feb 17 at 4:44
add a comment |
Thanks for contributing an answer to Ask Different!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fapple.stackexchange.com%2fquestions%2f351637%2fhow-can-i-recover-a-mac-formatted-external-hard-drive%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
