How do I know whether my disk C: is on the SSD or on the HDD? [closed]











up vote
6
down vote

favorite












I bought an SSD and I cloned the system from the HDD to the SSD using the Minitool Partition Wizard, then changed the boot order in the BIOS and rebooted. I have two disks called OS visible in the File Manager. One is active (C:) - but how do I make sure that it's on the SSD? I open "properties" of drive C: in the File Manager, but there is nothing to indicate where it's located in the physical sense (SSD or HDD).






windows-10 hard-drive ssd windows-explorer







share|improve this question















closed as too broad by Ramhound, DavidPostill♦ Nov 24 at 21:06


Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.















  • I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
    – eckes
    Nov 25 at 0:57






  • 2




    I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
    – music2myear
    Nov 26 at 17:12

















up vote
6
down vote

favorite












I bought an SSD and I cloned the system from the HDD to the SSD using the Minitool Partition Wizard, then changed the boot order in the BIOS and rebooted. I have two disks called OS visible in the File Manager. One is active (C:) - but how do I make sure that it's on the SSD? I open "properties" of drive C: in the File Manager, but there is nothing to indicate where it's located in the physical sense (SSD or HDD).






windows-10 hard-drive ssd windows-explorer







share|improve this question















closed as too broad by Ramhound, DavidPostill♦ Nov 24 at 21:06


Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.















  • I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
    – eckes
    Nov 25 at 0:57






  • 2




    I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
    – music2myear
    Nov 26 at 17:12















up vote
6
down vote

favorite









up vote
6
down vote

favorite











I bought an SSD and I cloned the system from the HDD to the SSD using the Minitool Partition Wizard, then changed the boot order in the BIOS and rebooted. I have two disks called OS visible in the File Manager. One is active (C:) - but how do I make sure that it's on the SSD? I open "properties" of drive C: in the File Manager, but there is nothing to indicate where it's located in the physical sense (SSD or HDD).






windows-10 hard-drive ssd windows-explorer







share|improve this question















I bought an SSD and I cloned the system from the HDD to the SSD using the Minitool Partition Wizard, then changed the boot order in the BIOS and rebooted. I have two disks called OS visible in the File Manager. One is active (C:) - but how do I make sure that it's on the SSD? I open "properties" of drive C: in the File Manager, but there is nothing to indicate where it's located in the physical sense (SSD or HDD).






windows-10 hard-drive ssd windows-explorer




windows-10 hard-drive ssd windows-explorer






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Nov 26 at 18:02

























asked Nov 24 at 16:23









CopperKettle

9312




9312




closed as too broad by Ramhound, DavidPostill♦ Nov 24 at 21:06


Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.






closed as too broad by Ramhound, DavidPostill♦ Nov 24 at 21:06


Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.














  • I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
    – eckes
    Nov 25 at 0:57






  • 2




    I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
    – music2myear
    Nov 26 at 17:12




















  • I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
    – eckes
    Nov 25 at 0:57






  • 2




    I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
    – music2myear
    Nov 26 at 17:12


















I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
– eckes
Nov 25 at 0:57




I think you can drill down from the Explorer properties to driver and device properties (for all volumes) where you can check model or manufacturer.
– eckes
Nov 25 at 0:57




2




2




I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
– music2myear
Nov 26 at 17:12






I believe this question is clear enough and not too broad. OP needed to know about the appropriate tool to get them the information they require, and gave us sufficient information in their question to make that clear.
– music2myear
Nov 26 at 17:12












1 Answer
1






active

oldest

votes

















up vote
7
down vote



accepted










You find this information most easily in Disk Management.



Open your start menu and begin typing "disk management", once this application shows in the results open it.



You'll now see a list of all of the disks on your computer and the partitions on them and the drive letters associated with those partitions.






share|improve this answer




























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes








    up vote
    7
    down vote



    accepted










    You find this information most easily in Disk Management.



    Open your start menu and begin typing "disk management", once this application shows in the results open it.



    You'll now see a list of all of the disks on your computer and the partitions on them and the drive letters associated with those partitions.






    share|improve this answer

























      up vote
      7
      down vote



      accepted










      You find this information most easily in Disk Management.



      Open your start menu and begin typing "disk management", once this application shows in the results open it.



      You'll now see a list of all of the disks on your computer and the partitions on them and the drive letters associated with those partitions.






      share|improve this answer























        up vote
        7
        down vote



        accepted







        up vote
        7
        down vote



        accepted






        You find this information most easily in Disk Management.



        Open your start menu and begin typing "disk management", once this application shows in the results open it.



        You'll now see a list of all of the disks on your computer and the partitions on them and the drive letters associated with those partitions.






        share|improve this answer












        You find this information most easily in Disk Management.



        Open your start menu and begin typing "disk management", once this application shows in the results open it.



        You'll now see a list of all of the disks on your computer and the partitions on them and the drive letters associated with those partitions.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Nov 24 at 16:41









        music2myear

        30.4k75596




        30.4k75596















            -

            Popular posts from this blog

            Aardman Animations

            Image
            Aardman Animations, Ltd. Aardman Animations Tipo privada Atividade Animação em stop-motion , Animação em CGI Fundação 1972 Fundador(es) Peter Lord David Sproxton Sede Bristol, Inglaterra  Reino Unido Proprietário(s) Dreamworks Pessoas-chave Peter Lord David Sproxton Nick Park Divisões Aardman Features Aardman Digital Aardman Commercials Aardman Broadcast Aardman International Aardman Rights Aardman Effects Aardman 3-D Systems Aardman Nathan Love AardBoiled Website oficial aardman.com
            Read more

            Are they similar matrix

            Image
            0 $begingroup$ Do $begin{bmatrix} 0&i&0\0&0&1\0&0&0 end{bmatrix} $ and $begin{bmatrix} 0&0&0\-i&0&0\0&1&0 end{bmatrix} $ are similar.Is this True/false Clearly both are nilpotent and one is conjucate transpose of other but how to know if they are similar.i'm stuck. Please help me linear-algebra vector-spaces eigenvalues-eigenvectors generalizedeigenvector share | cite | improve this question edited Dec 10 '18 at 6:38 Vasanth Kris asked Dec 10 '18 at 6:19
            Read more

            “minimization” problem in Euclidean space related to orthonormal basis

            Image
            3 $begingroup$ I have stumbled upon an exercice for second year undegraduate student majoring in economics which I find quite demanding. I have an idea for the solution, but it seems awfully complicated, and I am wondering if there was a simpler way to solve it. This goes as follows: Let $(E, langle, rangle)$ be a euclidean space of dimension $n geq 2$ . 1) For any $x in E$ , show that $||x|| = sqrt{n}$ if and only if there exists $(e_1, dots, e_n)$ an orthonormal basis of $E$ such that $x =e_1+ ldots + e_n$ . 2) For any $(x,y) in E$ , show that $||x|| = sqrt{n}$ , $||y|| = sqrt{frac{n(n+1)(2n+1)}{6}}$ and $langle x,y rangle = frac{n(n+1)}{2}$ if and only if there eixsts $(e_1, ldots, e_n)$ an orthonormal basis of $E$ such that $x = e_1 + ldots + e_n$ and $y = e_1 + 2e_2 + ldots + ne_n$ The first q
            Read more