How can I swap primary and secondary display during an RDP session?
I have two displays on my desktop (Windows 10 Enterprise) and frequently connect to a VM (Windows 8 Pro) via remote desktop. I have checked "Use all my monitors for the remote session" so the display is extended across both screens. This is all fine.
However, when I work from home and RDP in to my desktop and then on to the VM, my screens are reversed. As it's a remote session, I can't change this.
My question is: how to I get screen 1 on the left and screen 2 on the right? It's a VM, so I can only connect to it via RDP.
I have searched for an answer already, but all the answers I found concerned editing the RDP file so the session starts full screen and/or on the correct screen on my desktop. I don't think it's an RDP issue, I need to change the settings in the VM OS somehow.
It's a minor annoyance, but I prefer to have Visual Studio on the left screen and browser on the right. I can drag them over each time I log on, but I'd rather swap the displays on the VM so I don't have to.
windows multiple-monitors virtual-machine remote-desktop
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
add a comment |
I have two displays on my desktop (Windows 10 Enterprise) and frequently connect to a VM (Windows 8 Pro) via remote desktop. I have checked "Use all my monitors for the remote session" so the display is extended across both screens. This is all fine.
However, when I work from home and RDP in to my desktop and then on to the VM, my screens are reversed. As it's a remote session, I can't change this.
My question is: how to I get screen 1 on the left and screen 2 on the right? It's a VM, so I can only connect to it via RDP.
I have searched for an answer already, but all the answers I found concerned editing the RDP file so the session starts full screen and/or on the correct screen on my desktop. I don't think it's an RDP issue, I need to change the settings in the VM OS somehow.
It's a minor annoyance, but I prefer to have Visual Studio on the left screen and browser on the right. I can drag them over each time I log on, but I'd rather swap the displays on the VM so I don't have to.
windows multiple-monitors virtual-machine remote-desktop
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22
add a comment |
I have two displays on my desktop (Windows 10 Enterprise) and frequently connect to a VM (Windows 8 Pro) via remote desktop. I have checked "Use all my monitors for the remote session" so the display is extended across both screens. This is all fine.
However, when I work from home and RDP in to my desktop and then on to the VM, my screens are reversed. As it's a remote session, I can't change this.
My question is: how to I get screen 1 on the left and screen 2 on the right? It's a VM, so I can only connect to it via RDP.
I have searched for an answer already, but all the answers I found concerned editing the RDP file so the session starts full screen and/or on the correct screen on my desktop. I don't think it's an RDP issue, I need to change the settings in the VM OS somehow.
It's a minor annoyance, but I prefer to have Visual Studio on the left screen and browser on the right. I can drag them over each time I log on, but I'd rather swap the displays on the VM so I don't have to.
windows multiple-monitors virtual-machine remote-desktop
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
I have two displays on my desktop (Windows 10 Enterprise) and frequently connect to a VM (Windows 8 Pro) via remote desktop. I have checked "Use all my monitors for the remote session" so the display is extended across both screens. This is all fine.
However, when I work from home and RDP in to my desktop and then on to the VM, my screens are reversed. As it's a remote session, I can't change this.
My question is: how to I get screen 1 on the left and screen 2 on the right? It's a VM, so I can only connect to it via RDP.
I have searched for an answer already, but all the answers I found concerned editing the RDP file so the session starts full screen and/or on the correct screen on my desktop. I don't think it's an RDP issue, I need to change the settings in the VM OS somehow.
It's a minor annoyance, but I prefer to have Visual Studio on the left screen and browser on the right. I can drag them over each time I log on, but I'd rather swap the displays on the VM so I don't have to.
windows multiple-monitors virtual-machine remote-desktop
windows multiple-monitors virtual-machine remote-desktop
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
asked Oct 19 '16 at 13:05
jon_twojon_two
12126
12126
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22
add a comment |
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22
add a comment |
3 Answers
3
active
oldest
votes
It just happened to me as well. This is what I did:
- Open RDP. Make sure you are on the main monitor
- Connect to the same box but set it to single monitor and full screen
- I believe it should be enough
- but I also made the RPD session normal
- then move the window to the second screen.
- then move the wndow back the the main screen.
- Disconnect
- Connect again specifying Use all monitors
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
add a comment |
I found a similar way to manipulate RDP. I decreased the resolution on one of my local monitors so that RDP would change which host monitor was assigned to which local monitor. Then after it assigned the monitors the way I wanted them, I changed the resolution of my local monitor back up. RDP kept the monitor assignments, and increased the resolution of the remote screen to match the local resolution. I'm guessing the apps will be all over the place when I get back and log in from the lock screen.
YMMV, but it's another lever to yank.
answered Feb 2 at 3:19
Ben GBen G
111
add a comment |
I had a similar issue, connecting to a Windows 10 machine from a Mac using RDP. The monitors displayed in RDP were reversed compared to when I sit in front of the PC.
I realised that the the main monitor on my Mac (the one with the menu bar in Display settings) was on the left, but the main monitor on the PC was set on the right. When RDP connects it connects main monitor to main monitor, so in the RDP session the screens on the remote session were reversed from when I log into it directly.
My solution was to open the Mac Display/Arrangement setting. Leave the monitor arrangement unchanged but drag the menu bar to the other (RH in my case) monitor. Close
Hey Presto! When I RDP into the Windows 10 PC the monitor displays are the right way round!
Hope this helps someone.
answered Feb 11 '18 at 12:30
MikeMike
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1136614%2fhow-can-i-swap-primary-and-secondary-display-during-an-rdp-session%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
It just happened to me as well. This is what I did:
- Open RDP. Make sure you are on the main monitor
- Connect to the same box but set it to single monitor and full screen
- I believe it should be enough
- but I also made the RPD session normal
- then move the window to the second screen.
- then move the wndow back the the main screen.
- Disconnect
- Connect again specifying Use all monitors
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
add a comment |
It just happened to me as well. This is what I did:
- Open RDP. Make sure you are on the main monitor
- Connect to the same box but set it to single monitor and full screen
- I believe it should be enough
- but I also made the RPD session normal
- then move the window to the second screen.
- then move the wndow back the the main screen.
- Disconnect
- Connect again specifying Use all monitors
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
add a comment |
It just happened to me as well. This is what I did:
- Open RDP. Make sure you are on the main monitor
- Connect to the same box but set it to single monitor and full screen
- I believe it should be enough
- but I also made the RPD session normal
- then move the window to the second screen.
- then move the wndow back the the main screen.
- Disconnect
- Connect again specifying Use all monitors
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
It just happened to me as well. This is what I did:
- Open RDP. Make sure you are on the main monitor
- Connect to the same box but set it to single monitor and full screen
- I believe it should be enough
- but I also made the RPD session normal
- then move the window to the second screen.
- then move the wndow back the the main screen.
- Disconnect
- Connect again specifying Use all monitors
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
edited Jul 3 '17 at 2:37
Donald Duck
1,47461831
1,47461831
answered Jul 3 '17 at 1:03
namvannamvan
313
answered Jul 3 '17 at 1:03
namvannamvan
313
answered Jul 3 '17 at 1:03
namvannamvan
313
313
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
add a comment |
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
I can verify that this worked. Change your RDP settings to single screen then start RDP and log into windows. Close out of RDP then change the settings back to multiple monitors. After this my open windows were on the correct monitor.
– Graham
Feb 16 '18 at 1:02
add a comment |
I found a similar way to manipulate RDP. I decreased the resolution on one of my local monitors so that RDP would change which host monitor was assigned to which local monitor. Then after it assigned the monitors the way I wanted them, I changed the resolution of my local monitor back up. RDP kept the monitor assignments, and increased the resolution of the remote screen to match the local resolution. I'm guessing the apps will be all over the place when I get back and log in from the lock screen.
YMMV, but it's another lever to yank.
answered Feb 2 at 3:19
Ben GBen G
111
add a comment |
I found a similar way to manipulate RDP. I decreased the resolution on one of my local monitors so that RDP would change which host monitor was assigned to which local monitor. Then after it assigned the monitors the way I wanted them, I changed the resolution of my local monitor back up. RDP kept the monitor assignments, and increased the resolution of the remote screen to match the local resolution. I'm guessing the apps will be all over the place when I get back and log in from the lock screen.
YMMV, but it's another lever to yank.
answered Feb 2 at 3:19
Ben GBen G
111
add a comment |
I found a similar way to manipulate RDP. I decreased the resolution on one of my local monitors so that RDP would change which host monitor was assigned to which local monitor. Then after it assigned the monitors the way I wanted them, I changed the resolution of my local monitor back up. RDP kept the monitor assignments, and increased the resolution of the remote screen to match the local resolution. I'm guessing the apps will be all over the place when I get back and log in from the lock screen.
YMMV, but it's another lever to yank.
answered Feb 2 at 3:19
Ben GBen G
111
I found a similar way to manipulate RDP. I decreased the resolution on one of my local monitors so that RDP would change which host monitor was assigned to which local monitor. Then after it assigned the monitors the way I wanted them, I changed the resolution of my local monitor back up. RDP kept the monitor assignments, and increased the resolution of the remote screen to match the local resolution. I'm guessing the apps will be all over the place when I get back and log in from the lock screen.
YMMV, but it's another lever to yank.
answered Feb 2 at 3:19
Ben GBen G
111
answered Feb 2 at 3:19
Ben GBen G
111
answered Feb 2 at 3:19
Ben GBen G
111
answered Feb 2 at 3:19
Ben GBen G
111
111
add a comment |
add a comment |
I had a similar issue, connecting to a Windows 10 machine from a Mac using RDP. The monitors displayed in RDP were reversed compared to when I sit in front of the PC.
I realised that the the main monitor on my Mac (the one with the menu bar in Display settings) was on the left, but the main monitor on the PC was set on the right. When RDP connects it connects main monitor to main monitor, so in the RDP session the screens on the remote session were reversed from when I log into it directly.
My solution was to open the Mac Display/Arrangement setting. Leave the monitor arrangement unchanged but drag the menu bar to the other (RH in my case) monitor. Close
Hey Presto! When I RDP into the Windows 10 PC the monitor displays are the right way round!
Hope this helps someone.
answered Feb 11 '18 at 12:30
MikeMike
1
add a comment |
I had a similar issue, connecting to a Windows 10 machine from a Mac using RDP. The monitors displayed in RDP were reversed compared to when I sit in front of the PC.
I realised that the the main monitor on my Mac (the one with the menu bar in Display settings) was on the left, but the main monitor on the PC was set on the right. When RDP connects it connects main monitor to main monitor, so in the RDP session the screens on the remote session were reversed from when I log into it directly.
My solution was to open the Mac Display/Arrangement setting. Leave the monitor arrangement unchanged but drag the menu bar to the other (RH in my case) monitor. Close
Hey Presto! When I RDP into the Windows 10 PC the monitor displays are the right way round!
Hope this helps someone.
answered Feb 11 '18 at 12:30
MikeMike
1
add a comment |
I had a similar issue, connecting to a Windows 10 machine from a Mac using RDP. The monitors displayed in RDP were reversed compared to when I sit in front of the PC.
I realised that the the main monitor on my Mac (the one with the menu bar in Display settings) was on the left, but the main monitor on the PC was set on the right. When RDP connects it connects main monitor to main monitor, so in the RDP session the screens on the remote session were reversed from when I log into it directly.
My solution was to open the Mac Display/Arrangement setting. Leave the monitor arrangement unchanged but drag the menu bar to the other (RH in my case) monitor. Close
Hey Presto! When I RDP into the Windows 10 PC the monitor displays are the right way round!
Hope this helps someone.
answered Feb 11 '18 at 12:30
MikeMike
1
I had a similar issue, connecting to a Windows 10 machine from a Mac using RDP. The monitors displayed in RDP were reversed compared to when I sit in front of the PC.
I realised that the the main monitor on my Mac (the one with the menu bar in Display settings) was on the left, but the main monitor on the PC was set on the right. When RDP connects it connects main monitor to main monitor, so in the RDP session the screens on the remote session were reversed from when I log into it directly.
My solution was to open the Mac Display/Arrangement setting. Leave the monitor arrangement unchanged but drag the menu bar to the other (RH in my case) monitor. Close
Hey Presto! When I RDP into the Windows 10 PC the monitor displays are the right way round!
Hope this helps someone.
answered Feb 11 '18 at 12:30
MikeMike
1
answered Feb 11 '18 at 12:30
MikeMike
1
answered Feb 11 '18 at 12:30
MikeMike
1
answered Feb 11 '18 at 12:30
MikeMike
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1136614%2fhow-can-i-swap-primary-and-secondary-display-during-an-rdp-session%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
The monitor order is correct on the RDP office desktop, but then becomes reversed ont he RDP to the guest?
– Yorik
Oct 19 '16 at 13:55
@Yorik that's right; the office desktop is the reverse of the screenshot above - 1 on the left, 2 on the right.
– jon_two
Oct 19 '16 at 14:22