Touch screen monitor is reversed
up vote
0
down vote
favorite
I have a DGM L-1935WD touch screen monitor I purchased second hand to use, but when I touch the monitor it comes up as if I am touching somewhere else.
If I click the Windows button on my monitor I shows as if I am clicking the top right hand corner, or if I click the bottom right it shows I am clicking the top left.
I have tried to find drivers (which I haven't found any for it) and also done the tablet PC settings and clicked setup on there which has has no effect.
Does anyone have any ideas on how to sort this?
windows-7 display touchscreen
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
|
show 2 more comments
up vote
0
down vote
favorite
I have a DGM L-1935WD touch screen monitor I purchased second hand to use, but when I touch the monitor it comes up as if I am touching somewhere else.
If I click the Windows button on my monitor I shows as if I am clicking the top right hand corner, or if I click the bottom right it shows I am clicking the top left.
I have tried to find drivers (which I haven't found any for it) and also done the tablet PC settings and clicked setup on there which has has no effect.
Does anyone have any ideas on how to sort this?
windows-7 display touchscreen
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
1
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09
|
show 2 more comments
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I have a DGM L-1935WD touch screen monitor I purchased second hand to use, but when I touch the monitor it comes up as if I am touching somewhere else.
If I click the Windows button on my monitor I shows as if I am clicking the top right hand corner, or if I click the bottom right it shows I am clicking the top left.
I have tried to find drivers (which I haven't found any for it) and also done the tablet PC settings and clicked setup on there which has has no effect.
Does anyone have any ideas on how to sort this?
windows-7 display touchscreen
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
I have a DGM L-1935WD touch screen monitor I purchased second hand to use, but when I touch the monitor it comes up as if I am touching somewhere else.
If I click the Windows button on my monitor I shows as if I am clicking the top right hand corner, or if I click the bottom right it shows I am clicking the top left.
I have tried to find drivers (which I haven't found any for it) and also done the tablet PC settings and clicked setup on there which has has no effect.
Does anyone have any ideas on how to sort this?
windows-7 display touchscreen
windows-7 display touchscreen
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
edited Feb 21 '16 at 13:38
DavidPostill♦
103k25222256
103k25222256
asked Feb 21 '16 at 12:13
Craig Matchett
111
asked Feb 21 '16 at 12:13
Craig Matchett
111
asked Feb 21 '16 at 12:13
Craig Matchett
111
111
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
1
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09
|
show 2 more comments
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
1
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
1
1
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09
|
show 2 more comments
2 Answers
2
active
oldest
votes
up vote
0
down vote
Looking at the manual for your monitor here - there is no mention at all of a touch screen function, USB, or anything else. As such, I'm suspicious there is a third party overlay on your monitor controlling the touch interface.
Without being able to physically inspect the device, it's hard to say for certain what is providing it. It's possible, looking at your video, that the overlay is fitted upside down, as the input you're describing would make sense if the touch screen was rotated 180o.
It's also possible the touch screen is fitted correctly and has an accompanying driver and software package allowing the input to be rotated. Without knowing the exact device, it's not possible for me to say what this may be, but you could do the following steps to try and work it out:
- Go to Device Manager (Win + X -> Device Manager)
- Find your touch device in the list - It may be under
Human Interface DevicesorMice and other input devicesif it's not in an obvious location. - Right click the device and click
Properties, go toDetailsand clickHardware Idsin the drop down box. - In here you should see a
VIDandPIDID, which you can search online to find out what the device actually is and what driver it takes. For example, my mouse usesVID_0461 PID_4D17, so I would search this to find a relevant driver, should I need it.
Alternatively, you could see if the touch overlay can be removed easily and fitted rotated the other way up - although if the previous owner had it this way it's more likely there is a software way this can be resolved.
Edit- Looking around a little more, a couple more suggestions are:
- Try using the calibration tool (See here for more info,
- There's a Q/A here where one user has created a tool to flip the X and Y axis of a mouse, although this is likely to disrupt your normal mouse usage as well.
edited Mar 20 '17 at 10:04
Community♦
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
|
show 2 more comments
up vote
0
down vote
MAFMouse is a low level filter driver to rotate or invert mouse movements and some touch screens. Please contact me (I'm the author) for a demo version.
answered Dec 22 '16 at 12:30
maf-soft
1585
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1043603%2ftouch-screen-monitor-is-reversed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Looking at the manual for your monitor here - there is no mention at all of a touch screen function, USB, or anything else. As such, I'm suspicious there is a third party overlay on your monitor controlling the touch interface.
Without being able to physically inspect the device, it's hard to say for certain what is providing it. It's possible, looking at your video, that the overlay is fitted upside down, as the input you're describing would make sense if the touch screen was rotated 180o.
It's also possible the touch screen is fitted correctly and has an accompanying driver and software package allowing the input to be rotated. Without knowing the exact device, it's not possible for me to say what this may be, but you could do the following steps to try and work it out:
- Go to Device Manager (Win + X -> Device Manager)
- Find your touch device in the list - It may be under
Human Interface DevicesorMice and other input devicesif it's not in an obvious location. - Right click the device and click
Properties, go toDetailsand clickHardware Idsin the drop down box. - In here you should see a
VIDandPIDID, which you can search online to find out what the device actually is and what driver it takes. For example, my mouse usesVID_0461 PID_4D17, so I would search this to find a relevant driver, should I need it.
Alternatively, you could see if the touch overlay can be removed easily and fitted rotated the other way up - although if the previous owner had it this way it's more likely there is a software way this can be resolved.
Edit- Looking around a little more, a couple more suggestions are:
- Try using the calibration tool (See here for more info,
- There's a Q/A here where one user has created a tool to flip the X and Y axis of a mouse, although this is likely to disrupt your normal mouse usage as well.
edited Mar 20 '17 at 10:04
Community♦
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
|
show 2 more comments
up vote
0
down vote
Looking at the manual for your monitor here - there is no mention at all of a touch screen function, USB, or anything else. As such, I'm suspicious there is a third party overlay on your monitor controlling the touch interface.
Without being able to physically inspect the device, it's hard to say for certain what is providing it. It's possible, looking at your video, that the overlay is fitted upside down, as the input you're describing would make sense if the touch screen was rotated 180o.
It's also possible the touch screen is fitted correctly and has an accompanying driver and software package allowing the input to be rotated. Without knowing the exact device, it's not possible for me to say what this may be, but you could do the following steps to try and work it out:
- Go to Device Manager (Win + X -> Device Manager)
- Find your touch device in the list - It may be under
Human Interface DevicesorMice and other input devicesif it's not in an obvious location. - Right click the device and click
Properties, go toDetailsand clickHardware Idsin the drop down box. - In here you should see a
VIDandPIDID, which you can search online to find out what the device actually is and what driver it takes. For example, my mouse usesVID_0461 PID_4D17, so I would search this to find a relevant driver, should I need it.
Alternatively, you could see if the touch overlay can be removed easily and fitted rotated the other way up - although if the previous owner had it this way it's more likely there is a software way this can be resolved.
Edit- Looking around a little more, a couple more suggestions are:
- Try using the calibration tool (See here for more info,
- There's a Q/A here where one user has created a tool to flip the X and Y axis of a mouse, although this is likely to disrupt your normal mouse usage as well.
edited Mar 20 '17 at 10:04
Community♦
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
|
show 2 more comments
up vote
0
down vote
up vote
0
down vote
Looking at the manual for your monitor here - there is no mention at all of a touch screen function, USB, or anything else. As such, I'm suspicious there is a third party overlay on your monitor controlling the touch interface.
Without being able to physically inspect the device, it's hard to say for certain what is providing it. It's possible, looking at your video, that the overlay is fitted upside down, as the input you're describing would make sense if the touch screen was rotated 180o.
It's also possible the touch screen is fitted correctly and has an accompanying driver and software package allowing the input to be rotated. Without knowing the exact device, it's not possible for me to say what this may be, but you could do the following steps to try and work it out:
- Go to Device Manager (Win + X -> Device Manager)
- Find your touch device in the list - It may be under
Human Interface DevicesorMice and other input devicesif it's not in an obvious location. - Right click the device and click
Properties, go toDetailsand clickHardware Idsin the drop down box. - In here you should see a
VIDandPIDID, which you can search online to find out what the device actually is and what driver it takes. For example, my mouse usesVID_0461 PID_4D17, so I would search this to find a relevant driver, should I need it.
Alternatively, you could see if the touch overlay can be removed easily and fitted rotated the other way up - although if the previous owner had it this way it's more likely there is a software way this can be resolved.
Edit- Looking around a little more, a couple more suggestions are:
- Try using the calibration tool (See here for more info,
- There's a Q/A here where one user has created a tool to flip the X and Y axis of a mouse, although this is likely to disrupt your normal mouse usage as well.
edited Mar 20 '17 at 10:04
Community♦
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
Looking at the manual for your monitor here - there is no mention at all of a touch screen function, USB, or anything else. As such, I'm suspicious there is a third party overlay on your monitor controlling the touch interface.
Without being able to physically inspect the device, it's hard to say for certain what is providing it. It's possible, looking at your video, that the overlay is fitted upside down, as the input you're describing would make sense if the touch screen was rotated 180o.
It's also possible the touch screen is fitted correctly and has an accompanying driver and software package allowing the input to be rotated. Without knowing the exact device, it's not possible for me to say what this may be, but you could do the following steps to try and work it out:
- Go to Device Manager (Win + X -> Device Manager)
- Find your touch device in the list - It may be under
Human Interface DevicesorMice and other input devicesif it's not in an obvious location. - Right click the device and click
Properties, go toDetailsand clickHardware Idsin the drop down box. - In here you should see a
VIDandPIDID, which you can search online to find out what the device actually is and what driver it takes. For example, my mouse usesVID_0461 PID_4D17, so I would search this to find a relevant driver, should I need it.
Alternatively, you could see if the touch overlay can be removed easily and fitted rotated the other way up - although if the previous owner had it this way it's more likely there is a software way this can be resolved.
Edit- Looking around a little more, a couple more suggestions are:
- Try using the calibration tool (See here for more info,
- There's a Q/A here where one user has created a tool to flip the X and Y axis of a mouse, although this is likely to disrupt your normal mouse usage as well.
edited Mar 20 '17 at 10:04
Community♦
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
edited Mar 20 '17 at 10:04
Community♦
1
edited Mar 20 '17 at 10:04
Community♦
1
edited Mar 20 '17 at 10:04
Community♦
1
1
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
answered Feb 21 '16 at 16:54
Jonno
17.6k44462
17.6k44462
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
|
show 2 more comments
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
do you have a link for where i can search for these drivers? i am assuming its VID_0664 and PID_0309 going of this picture? i248.photobucket.com/albums/gg195/craig2d/Capture.png
– Craig Matchett
Feb 21 '16 at 17:15
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
@CraigMatchett I don't know if there even are any, if you can get the VID and PID I can attempt to help.
– Jonno
Feb 21 '16 at 17:16
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
VID_0664 and PID_0309
– Craig Matchett
Feb 21 '16 at 17:40
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
@CraigMatchett Unfortunately that's just a generic driver as well, I can't see any obvious replacement. I've just updated my answer with some other suggestions for you, but I'm afraid I'm out of ideas beyond physically trying to rotate the panel overlay.
– Jonno
Feb 21 '16 at 17:52
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
i tried that mouse reverse program and it just flipped my mouse, it had no effect on my touch screen :( i also tried the calibration tool and that didnt work either. thanks for you help and suggestions anyway, i'll have to keep looking i guess
– Craig Matchett
Feb 21 '16 at 17:55
|
show 2 more comments
up vote
0
down vote
MAFMouse is a low level filter driver to rotate or invert mouse movements and some touch screens. Please contact me (I'm the author) for a demo version.
answered Dec 22 '16 at 12:30
maf-soft
1585
add a comment |
up vote
0
down vote
MAFMouse is a low level filter driver to rotate or invert mouse movements and some touch screens. Please contact me (I'm the author) for a demo version.
answered Dec 22 '16 at 12:30
maf-soft
1585
add a comment |
up vote
0
down vote
up vote
0
down vote
MAFMouse is a low level filter driver to rotate or invert mouse movements and some touch screens. Please contact me (I'm the author) for a demo version.
answered Dec 22 '16 at 12:30
maf-soft
1585
MAFMouse is a low level filter driver to rotate or invert mouse movements and some touch screens. Please contact me (I'm the author) for a demo version.
answered Dec 22 '16 at 12:30
maf-soft
1585
answered Dec 22 '16 at 12:30
maf-soft
1585
answered Dec 22 '16 at 12:30
maf-soft
1585
answered Dec 22 '16 at 12:30
maf-soft
1585
1585
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1043603%2ftouch-screen-monitor-is-reversed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
it has a VGA cable and usb cable which are both plugged in and im running windows 7 professional 64bit
– Craig Matchett
Feb 21 '16 at 12:15
1
Are you sure this monitor is a touch screen monitor as standard, and the touch screen isn't a third party add on, upside down/back to front? I've looked it up and can't find any evidence of a touch screen model?
– Jonno
Feb 21 '16 at 12:35
im not 100% sure as i bought it second hand but it has a usb cable that is hard wired into the side of it
– Craig Matchett
Feb 21 '16 at 15:59
Could you post a photo perhaps?
– Jonno
Feb 21 '16 at 16:01
here is a link to a picture of where the USB cable goes into the side of the monitor [link] (s248.photobucket.com/user/craig2d/library/Others)
– Craig Matchett
Feb 21 '16 at 16:09