Does copper wire need to say it's copper?












3















I just saw this picture of wire.



enter image description here



Pirelli Cable-X - 500 MCM Type THHN or THWN-2 600V Gasoline & Oil Resistant II AWM (UL)



Wait a minute.



It's routine common THHN, like you might use in a 250A service or something. But despite all this detail it seems to have forgotten to state whether it is copper or aluminum. And tell you the truth, I've never stopped to notice if any of my other THHN also fail to mention.



If no wire material is stated... is there a default?










share|improve this question



























    3















    I just saw this picture of wire.



    enter image description here



    Pirelli Cable-X - 500 MCM Type THHN or THWN-2 600V Gasoline & Oil Resistant II AWM (UL)



    Wait a minute.



    It's routine common THHN, like you might use in a 250A service or something. But despite all this detail it seems to have forgotten to state whether it is copper or aluminum. And tell you the truth, I've never stopped to notice if any of my other THHN also fail to mention.



    If no wire material is stated... is there a default?










    share|improve this question

























      3












      3








      3








      I just saw this picture of wire.



      enter image description here



      Pirelli Cable-X - 500 MCM Type THHN or THWN-2 600V Gasoline & Oil Resistant II AWM (UL)



      Wait a minute.



      It's routine common THHN, like you might use in a 250A service or something. But despite all this detail it seems to have forgotten to state whether it is copper or aluminum. And tell you the truth, I've never stopped to notice if any of my other THHN also fail to mention.



      If no wire material is stated... is there a default?










      share|improve this question














      I just saw this picture of wire.



      enter image description here



      Pirelli Cable-X - 500 MCM Type THHN or THWN-2 600V Gasoline & Oil Resistant II AWM (UL)



      Wait a minute.



      It's routine common THHN, like you might use in a 250A service or something. But despite all this detail it seems to have forgotten to state whether it is copper or aluminum. And tell you the truth, I've never stopped to notice if any of my other THHN also fail to mention.



      If no wire material is stated... is there a default?







      wiring wire






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Feb 24 at 13:05









      HarperHarper

      74.7k448149




      74.7k448149






















          1 Answer
          1






          active

          oldest

          votes


















          6














          The UL publishes a guide on wire and cable markings:



          UL Marking and Application Guide
          https://www.ul.com/wp-content/uploads/2014/04/WC_MG.pdf




          Conductor Material



          Compact stranded copper conductors are identified by “compact” or “cmpct,” otherwise wire and
          cable with bare or coated copper conductor material is not marked with stranding identification.



          If the conductor material is either aluminum or copper-clad aluminum, the product, tag or carton
          markings (depending on the product category) identify the conductor material. These markings
          will appear as “AL,” “ALUMINUM,” “AL (CUCLAD),” “ALUMINUM (COPPER-CLAD),” “CU-CLAD
          AL” or “COPPER-CLAD ALUMINUM.”
          For some wire and cable, other metals may be used as conductor material. The associated
          markings for that wire and cable are explained under the heading “OTHER.”




          The "default" is indeed copper.



          However, the AWM in the marking would lead me to believe this may be something other than building wire per NEC:




          This guide does not address wire and cable evaluated only for suitability as factory-installed
          component wiring in other Listed equipment. Those products are Recognized by UL under the
          Component-Appliance Wiring Material (AWM) and Component-Nonshielded cable categories and
          are not identified with an NEC® wire Type designation.







          share|improve this answer


























          • Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

            – davidmneedham
            Mar 19 at 15:45












          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "73"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          noCode: true, onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f158436%2fdoes-copper-wire-need-to-say-its-copper%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          6














          The UL publishes a guide on wire and cable markings:



          UL Marking and Application Guide
          https://www.ul.com/wp-content/uploads/2014/04/WC_MG.pdf




          Conductor Material



          Compact stranded copper conductors are identified by “compact” or “cmpct,” otherwise wire and
          cable with bare or coated copper conductor material is not marked with stranding identification.



          If the conductor material is either aluminum or copper-clad aluminum, the product, tag or carton
          markings (depending on the product category) identify the conductor material. These markings
          will appear as “AL,” “ALUMINUM,” “AL (CUCLAD),” “ALUMINUM (COPPER-CLAD),” “CU-CLAD
          AL” or “COPPER-CLAD ALUMINUM.”
          For some wire and cable, other metals may be used as conductor material. The associated
          markings for that wire and cable are explained under the heading “OTHER.”




          The "default" is indeed copper.



          However, the AWM in the marking would lead me to believe this may be something other than building wire per NEC:




          This guide does not address wire and cable evaluated only for suitability as factory-installed
          component wiring in other Listed equipment. Those products are Recognized by UL under the
          Component-Appliance Wiring Material (AWM) and Component-Nonshielded cable categories and
          are not identified with an NEC® wire Type designation.







          share|improve this answer


























          • Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

            – davidmneedham
            Mar 19 at 15:45
















          6














          The UL publishes a guide on wire and cable markings:



          UL Marking and Application Guide
          https://www.ul.com/wp-content/uploads/2014/04/WC_MG.pdf




          Conductor Material



          Compact stranded copper conductors are identified by “compact” or “cmpct,” otherwise wire and
          cable with bare or coated copper conductor material is not marked with stranding identification.



          If the conductor material is either aluminum or copper-clad aluminum, the product, tag or carton
          markings (depending on the product category) identify the conductor material. These markings
          will appear as “AL,” “ALUMINUM,” “AL (CUCLAD),” “ALUMINUM (COPPER-CLAD),” “CU-CLAD
          AL” or “COPPER-CLAD ALUMINUM.”
          For some wire and cable, other metals may be used as conductor material. The associated
          markings for that wire and cable are explained under the heading “OTHER.”




          The "default" is indeed copper.



          However, the AWM in the marking would lead me to believe this may be something other than building wire per NEC:




          This guide does not address wire and cable evaluated only for suitability as factory-installed
          component wiring in other Listed equipment. Those products are Recognized by UL under the
          Component-Appliance Wiring Material (AWM) and Component-Nonshielded cable categories and
          are not identified with an NEC® wire Type designation.







          share|improve this answer


























          • Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

            – davidmneedham
            Mar 19 at 15:45














          6












          6








          6







          The UL publishes a guide on wire and cable markings:



          UL Marking and Application Guide
          https://www.ul.com/wp-content/uploads/2014/04/WC_MG.pdf




          Conductor Material



          Compact stranded copper conductors are identified by “compact” or “cmpct,” otherwise wire and
          cable with bare or coated copper conductor material is not marked with stranding identification.



          If the conductor material is either aluminum or copper-clad aluminum, the product, tag or carton
          markings (depending on the product category) identify the conductor material. These markings
          will appear as “AL,” “ALUMINUM,” “AL (CUCLAD),” “ALUMINUM (COPPER-CLAD),” “CU-CLAD
          AL” or “COPPER-CLAD ALUMINUM.”
          For some wire and cable, other metals may be used as conductor material. The associated
          markings for that wire and cable are explained under the heading “OTHER.”




          The "default" is indeed copper.



          However, the AWM in the marking would lead me to believe this may be something other than building wire per NEC:




          This guide does not address wire and cable evaluated only for suitability as factory-installed
          component wiring in other Listed equipment. Those products are Recognized by UL under the
          Component-Appliance Wiring Material (AWM) and Component-Nonshielded cable categories and
          are not identified with an NEC® wire Type designation.







          share|improve this answer















          The UL publishes a guide on wire and cable markings:



          UL Marking and Application Guide
          https://www.ul.com/wp-content/uploads/2014/04/WC_MG.pdf




          Conductor Material



          Compact stranded copper conductors are identified by “compact” or “cmpct,” otherwise wire and
          cable with bare or coated copper conductor material is not marked with stranding identification.



          If the conductor material is either aluminum or copper-clad aluminum, the product, tag or carton
          markings (depending on the product category) identify the conductor material. These markings
          will appear as “AL,” “ALUMINUM,” “AL (CUCLAD),” “ALUMINUM (COPPER-CLAD),” “CU-CLAD
          AL” or “COPPER-CLAD ALUMINUM.”
          For some wire and cable, other metals may be used as conductor material. The associated
          markings for that wire and cable are explained under the heading “OTHER.”




          The "default" is indeed copper.



          However, the AWM in the marking would lead me to believe this may be something other than building wire per NEC:




          This guide does not address wire and cable evaluated only for suitability as factory-installed
          component wiring in other Listed equipment. Those products are Recognized by UL under the
          Component-Appliance Wiring Material (AWM) and Component-Nonshielded cable categories and
          are not identified with an NEC® wire Type designation.








          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited Feb 24 at 14:21

























          answered Feb 24 at 14:08









          batsplatstersonbatsplatsterson

          13.6k11742




          13.6k11742













          • Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

            – davidmneedham
            Mar 19 at 15:45



















          • Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

            – davidmneedham
            Mar 19 at 15:45

















          Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

          – davidmneedham
          Mar 19 at 15:45





          Material can be UL listed and a UL Recognized Component. That is true in this case. It is UL Listed Type THHN UL Recognized AWM (appliance wiring material). Since it is Type THHN, it can be used as building wire in accordance with Article 300 of the NEC. The same material could also be used as a component within a UL-listed assembly.

          – davidmneedham
          Mar 19 at 15:45


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Home Improvement Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f158436%2fdoes-copper-wire-need-to-say-its-copper%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          Probability when a professor distributes a quiz and homework assignment to a class of n students.

          Aardman Animations

          Are they similar matrix