How is the keyboard connected in Dell Latitude E7440?












0














I’d like to learn which cable is used for sending keypresses to the notebook, since the following documentation, combined with knowledge about older models, makes it unclear.



From the “Removing the Keyboard” section of the “Dell Latitude E7440 Owner’s Manual”:




Perform the following steps as shown in the illustration:




  1. Lift the keyboard-backlight cable latch [1].

  2. Remove the cable from the system board [2].

  3. Lift the trackstick cable latch [3].

  4. Remove the cable from the system board [4].

  5. Lift the keyboard cable latch [5].

  6. Remove the cable from the system board [6].

  7. Lift the touchpad cable latch [7].

  8. Remove the cable from the system board [8].


An illustration for the above points




(Emphasis mine.) There you can see that the keyboard cable (I guess that’s the one to send key events with) is disconnected in steps 5–6 which correspond to numbers 5 and 6 on the illustration. But on that illustration, there’s a cable identified by steps 3–4 that much better resembles the cables that were used to send key events in older Latitude notebooks. Which one is right?



FIXME: the above image is downloaded from topics-cdn.dell.com, one day it may be updated or deleted…










share|improve this question



























    0














    I’d like to learn which cable is used for sending keypresses to the notebook, since the following documentation, combined with knowledge about older models, makes it unclear.



    From the “Removing the Keyboard” section of the “Dell Latitude E7440 Owner’s Manual”:




    Perform the following steps as shown in the illustration:




    1. Lift the keyboard-backlight cable latch [1].

    2. Remove the cable from the system board [2].

    3. Lift the trackstick cable latch [3].

    4. Remove the cable from the system board [4].

    5. Lift the keyboard cable latch [5].

    6. Remove the cable from the system board [6].

    7. Lift the touchpad cable latch [7].

    8. Remove the cable from the system board [8].


    An illustration for the above points




    (Emphasis mine.) There you can see that the keyboard cable (I guess that’s the one to send key events with) is disconnected in steps 5–6 which correspond to numbers 5 and 6 on the illustration. But on that illustration, there’s a cable identified by steps 3–4 that much better resembles the cables that were used to send key events in older Latitude notebooks. Which one is right?



    FIXME: the above image is downloaded from topics-cdn.dell.com, one day it may be updated or deleted…










    share|improve this question

























      0












      0








      0







      I’d like to learn which cable is used for sending keypresses to the notebook, since the following documentation, combined with knowledge about older models, makes it unclear.



      From the “Removing the Keyboard” section of the “Dell Latitude E7440 Owner’s Manual”:




      Perform the following steps as shown in the illustration:




      1. Lift the keyboard-backlight cable latch [1].

      2. Remove the cable from the system board [2].

      3. Lift the trackstick cable latch [3].

      4. Remove the cable from the system board [4].

      5. Lift the keyboard cable latch [5].

      6. Remove the cable from the system board [6].

      7. Lift the touchpad cable latch [7].

      8. Remove the cable from the system board [8].


      An illustration for the above points




      (Emphasis mine.) There you can see that the keyboard cable (I guess that’s the one to send key events with) is disconnected in steps 5–6 which correspond to numbers 5 and 6 on the illustration. But on that illustration, there’s a cable identified by steps 3–4 that much better resembles the cables that were used to send key events in older Latitude notebooks. Which one is right?



      FIXME: the above image is downloaded from topics-cdn.dell.com, one day it may be updated or deleted…










      share|improve this question













      I’d like to learn which cable is used for sending keypresses to the notebook, since the following documentation, combined with knowledge about older models, makes it unclear.



      From the “Removing the Keyboard” section of the “Dell Latitude E7440 Owner’s Manual”:




      Perform the following steps as shown in the illustration:




      1. Lift the keyboard-backlight cable latch [1].

      2. Remove the cable from the system board [2].

      3. Lift the trackstick cable latch [3].

      4. Remove the cable from the system board [4].

      5. Lift the keyboard cable latch [5].

      6. Remove the cable from the system board [6].

      7. Lift the touchpad cable latch [7].

      8. Remove the cable from the system board [8].


      An illustration for the above points




      (Emphasis mine.) There you can see that the keyboard cable (I guess that’s the one to send key events with) is disconnected in steps 5–6 which correspond to numbers 5 and 6 on the illustration. But on that illustration, there’s a cable identified by steps 3–4 that much better resembles the cables that were used to send key events in older Latitude notebooks. Which one is right?



      FIXME: the above image is downloaded from topics-cdn.dell.com, one day it may be updated or deleted…







      laptop keyboard dell-latitude connector






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Dec 19 '18 at 19:57









      gsc

      1033




      1033






















          1 Answer
          1






          active

          oldest

          votes


















          0














          steps 3–4
          The cable you refer to in English is called Flat Ribbon cable (or Multi-wire planar). It is a flat cable with several connectors and is not usually repaired, because it is quite hard and is usually integrated into the keyboard itself. Most likely you have to replace the keyboard if the cable is broken






          share|improve this answer





















          • Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
            – gsc
            Dec 20 '18 at 15:54











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "3"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1386024%2fhow-is-the-keyboard-connected-in-dell-latitude-e7440%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          0














          steps 3–4
          The cable you refer to in English is called Flat Ribbon cable (or Multi-wire planar). It is a flat cable with several connectors and is not usually repaired, because it is quite hard and is usually integrated into the keyboard itself. Most likely you have to replace the keyboard if the cable is broken






          share|improve this answer





















          • Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
            – gsc
            Dec 20 '18 at 15:54
















          0














          steps 3–4
          The cable you refer to in English is called Flat Ribbon cable (or Multi-wire planar). It is a flat cable with several connectors and is not usually repaired, because it is quite hard and is usually integrated into the keyboard itself. Most likely you have to replace the keyboard if the cable is broken






          share|improve this answer





















          • Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
            – gsc
            Dec 20 '18 at 15:54














          0












          0








          0






          steps 3–4
          The cable you refer to in English is called Flat Ribbon cable (or Multi-wire planar). It is a flat cable with several connectors and is not usually repaired, because it is quite hard and is usually integrated into the keyboard itself. Most likely you have to replace the keyboard if the cable is broken






          share|improve this answer












          steps 3–4
          The cable you refer to in English is called Flat Ribbon cable (or Multi-wire planar). It is a flat cable with several connectors and is not usually repaired, because it is quite hard and is usually integrated into the keyboard itself. Most likely you have to replace the keyboard if the cable is broken







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Dec 19 '18 at 21:09









          Gabriel Mendez

          111




          111












          • Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
            – gsc
            Dec 20 '18 at 15:54


















          • Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
            – gsc
            Dec 20 '18 at 15:54
















          Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
          – gsc
          Dec 20 '18 at 15:54




          Hi, thanks for your answer. I don’t own such keyboard, so fortunately there’s nothing to repair. I asked the above question in order to learn which of 3–4 and 5–6 cables is used for transmitting key presses (not trackpoint movements, not touchpad events and not backlight power; I assume there’s a separate cable for each of these purposes). The docs say that 3–4 is used by the trackpoint and that 5–6 by the keyboard, but am not that sure, as for example D630’s cables and connectors suggest it’s arranged the other way around. As said, I cannot test it, since I don’t currently have such keyboard.
          – gsc
          Dec 20 '18 at 15:54


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Super User!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.





          Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


          Please pay close attention to the following guidance:


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1386024%2fhow-is-the-keyboard-connected-in-dell-latitude-e7440%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          Index of /

          Tribalistas

          Listed building