How to set VPN connection to local network only?





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}







0















I am connecting to my workplace's network through a vpn. All I need is the local network there (offline servers, local computers and data stores). After I connected to the VPN, all of my packets go through the vpn and slows down everything for me and generates an unnecessary load on my office's internet connection (once windows started to update on my computer and it started to use most of the office's internet connection, because they only have 30/10 MBit/s internet connection).



Is it possible to set the vpn in a way, where it only allows access to the local resources?



enter image description here



Edit 1:



Can't I just set the default gateway off to the vpn?



enter image description here










share|improve this question

























  • It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

    – Run CMD
    Dec 10 '15 at 12:28











  • Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

    – pokemarine
    Dec 10 '15 at 12:41











  • Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

    – Run CMD
    Dec 10 '15 at 12:48











  • A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

    – Hennes
    Dec 10 '15 at 13:11




















0















I am connecting to my workplace's network through a vpn. All I need is the local network there (offline servers, local computers and data stores). After I connected to the VPN, all of my packets go through the vpn and slows down everything for me and generates an unnecessary load on my office's internet connection (once windows started to update on my computer and it started to use most of the office's internet connection, because they only have 30/10 MBit/s internet connection).



Is it possible to set the vpn in a way, where it only allows access to the local resources?



enter image description here



Edit 1:



Can't I just set the default gateway off to the vpn?



enter image description here










share|improve this question

























  • It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

    – Run CMD
    Dec 10 '15 at 12:28











  • Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

    – pokemarine
    Dec 10 '15 at 12:41











  • Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

    – Run CMD
    Dec 10 '15 at 12:48











  • A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

    – Hennes
    Dec 10 '15 at 13:11
















0












0








0


1






I am connecting to my workplace's network through a vpn. All I need is the local network there (offline servers, local computers and data stores). After I connected to the VPN, all of my packets go through the vpn and slows down everything for me and generates an unnecessary load on my office's internet connection (once windows started to update on my computer and it started to use most of the office's internet connection, because they only have 30/10 MBit/s internet connection).



Is it possible to set the vpn in a way, where it only allows access to the local resources?



enter image description here



Edit 1:



Can't I just set the default gateway off to the vpn?



enter image description here










share|improve this question
















I am connecting to my workplace's network through a vpn. All I need is the local network there (offline servers, local computers and data stores). After I connected to the VPN, all of my packets go through the vpn and slows down everything for me and generates an unnecessary load on my office's internet connection (once windows started to update on my computer and it started to use most of the office's internet connection, because they only have 30/10 MBit/s internet connection).



Is it possible to set the vpn in a way, where it only allows access to the local resources?



enter image description here



Edit 1:



Can't I just set the default gateway off to the vpn?



enter image description here







networking vpn






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Dec 10 '15 at 12:58







pokemarine

















asked Dec 10 '15 at 12:09









pokemarinepokemarine

1035




1035













  • It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

    – Run CMD
    Dec 10 '15 at 12:28











  • Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

    – pokemarine
    Dec 10 '15 at 12:41











  • Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

    – Run CMD
    Dec 10 '15 at 12:48











  • A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

    – Hennes
    Dec 10 '15 at 13:11





















  • It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

    – Run CMD
    Dec 10 '15 at 12:28











  • Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

    – pokemarine
    Dec 10 '15 at 12:41











  • Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

    – Run CMD
    Dec 10 '15 at 12:48











  • A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

    – Hennes
    Dec 10 '15 at 13:11



















It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

– Run CMD
Dec 10 '15 at 12:28





It's the purpose of the VPN to integrate a remote machine into a LAN. From that, it should be obvious that you want to think in different directions. It all starts with QoS settings in the company's router and regarding updates, IT will have to find the right compromise between leaving your computer as a security risk or providing the required bandwidth. You can't expect professional behaviour from an amateur setup.

– Run CMD
Dec 10 '15 at 12:28













Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

– pokemarine
Dec 10 '15 at 12:41





Things happen slow there, can I do anything while they fix this issue? Right now I need to connect and disconnect every time I need something, it is quite tiring. Shame I can't tell my programs which network to use.

– pokemarine
Dec 10 '15 at 12:41













Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

– Run CMD
Dec 10 '15 at 12:48





Turns out I probably misunderstood your question. Either way, there may be ways to bypass the VPN, e.g. for Windows updates, see here.

– Run CMD
Dec 10 '15 at 12:48













A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

– Hennes
Dec 10 '15 at 13:11







A useful term to know is split tunneling. See en.wikipedia.org/wiki/Split_tunneling

– Hennes
Dec 10 '15 at 13:11












1 Answer
1






active

oldest

votes


















0














I had the same problem some days ago and finally got it solved by modifying the priority windows assigns to each interface. You can do this by:




  1. on a command window, run "route PRINT" and annotate the priority of the vpn and non-vpn routes.

  2. go to the properties of the non-vpn interface, to the properties of tcp/ipv4 or tpc/ipv6 and click on "advanced". There you can uncheck the "automatic metric" and set another higher for that interface.
    By doing this when a connection can be established either by the vpn or the non-vpn, the one with the higher priority will be used.


However, there is a drawback: some VPNs automatically set the priority to the highest when they boot. So, before starting the VPN you should set again the metric to automatic, start the VPN, and reset the metric to whatever number you want.






share|improve this answer
























  • I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

    – pokemarine
    Dec 10 '15 at 12:59











  • probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

    – flix
    Dec 10 '15 at 13:05













  • I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

    – pokemarine
    Dec 10 '15 at 13:21












Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1011589%2fhow-to-set-vpn-connection-to-local-network-only%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









0














I had the same problem some days ago and finally got it solved by modifying the priority windows assigns to each interface. You can do this by:




  1. on a command window, run "route PRINT" and annotate the priority of the vpn and non-vpn routes.

  2. go to the properties of the non-vpn interface, to the properties of tcp/ipv4 or tpc/ipv6 and click on "advanced". There you can uncheck the "automatic metric" and set another higher for that interface.
    By doing this when a connection can be established either by the vpn or the non-vpn, the one with the higher priority will be used.


However, there is a drawback: some VPNs automatically set the priority to the highest when they boot. So, before starting the VPN you should set again the metric to automatic, start the VPN, and reset the metric to whatever number you want.






share|improve this answer
























  • I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

    – pokemarine
    Dec 10 '15 at 12:59











  • probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

    – flix
    Dec 10 '15 at 13:05













  • I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

    – pokemarine
    Dec 10 '15 at 13:21
















0














I had the same problem some days ago and finally got it solved by modifying the priority windows assigns to each interface. You can do this by:




  1. on a command window, run "route PRINT" and annotate the priority of the vpn and non-vpn routes.

  2. go to the properties of the non-vpn interface, to the properties of tcp/ipv4 or tpc/ipv6 and click on "advanced". There you can uncheck the "automatic metric" and set another higher for that interface.
    By doing this when a connection can be established either by the vpn or the non-vpn, the one with the higher priority will be used.


However, there is a drawback: some VPNs automatically set the priority to the highest when they boot. So, before starting the VPN you should set again the metric to automatic, start the VPN, and reset the metric to whatever number you want.






share|improve this answer
























  • I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

    – pokemarine
    Dec 10 '15 at 12:59











  • probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

    – flix
    Dec 10 '15 at 13:05













  • I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

    – pokemarine
    Dec 10 '15 at 13:21














0












0








0







I had the same problem some days ago and finally got it solved by modifying the priority windows assigns to each interface. You can do this by:




  1. on a command window, run "route PRINT" and annotate the priority of the vpn and non-vpn routes.

  2. go to the properties of the non-vpn interface, to the properties of tcp/ipv4 or tpc/ipv6 and click on "advanced". There you can uncheck the "automatic metric" and set another higher for that interface.
    By doing this when a connection can be established either by the vpn or the non-vpn, the one with the higher priority will be used.


However, there is a drawback: some VPNs automatically set the priority to the highest when they boot. So, before starting the VPN you should set again the metric to automatic, start the VPN, and reset the metric to whatever number you want.






share|improve this answer













I had the same problem some days ago and finally got it solved by modifying the priority windows assigns to each interface. You can do this by:




  1. on a command window, run "route PRINT" and annotate the priority of the vpn and non-vpn routes.

  2. go to the properties of the non-vpn interface, to the properties of tcp/ipv4 or tpc/ipv6 and click on "advanced". There you can uncheck the "automatic metric" and set another higher for that interface.
    By doing this when a connection can be established either by the vpn or the non-vpn, the one with the higher priority will be used.


However, there is a drawback: some VPNs automatically set the priority to the highest when they boot. So, before starting the VPN you should set again the metric to automatic, start the VPN, and reset the metric to whatever number you want.







share|improve this answer












share|improve this answer



share|improve this answer










answered Dec 10 '15 at 12:51









flixflix

84




84













  • I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

    – pokemarine
    Dec 10 '15 at 12:59











  • probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

    – flix
    Dec 10 '15 at 13:05













  • I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

    – pokemarine
    Dec 10 '15 at 13:21



















  • I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

    – pokemarine
    Dec 10 '15 at 12:59











  • probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

    – flix
    Dec 10 '15 at 13:05













  • I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

    – pokemarine
    Dec 10 '15 at 13:21

















I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

– pokemarine
Dec 10 '15 at 12:59





I added a picture to the question. What If I set the default gateway to off on the VPN's advanced tcp/ip settings.

– pokemarine
Dec 10 '15 at 12:59













probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

– flix
Dec 10 '15 at 13:05







probably should do the trick. If it does, tell us! :) However, I can not modify the VPN settings, only the actual interface's ones.

– flix
Dec 10 '15 at 13:05















I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

– pokemarine
Dec 10 '15 at 13:21





I tried to turn it off, but I cannot reach the remote network that way. I should look into the stuff the others linked (vpn bypass and split tunneling)

– pokemarine
Dec 10 '15 at 13:21


















draft saved

draft discarded




















































Thanks for contributing an answer to Super User!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1011589%2fhow-to-set-vpn-connection-to-local-network-only%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

Probability when a professor distributes a quiz and homework assignment to a class of n students.

Aardman Animations

Are they similar matrix