Can anyone help me identify this computer?
up vote
5
down vote
favorite
In my loft there is a computer with no branding that needs a new CMOS battery, and one that has the branding 'Tri Data' which I can't find anywhere on the internet.
It just shows a white screen as well and the keyboard doesn't want to work.
(The motherboard says HM386SX Rev 1.1)
identify-this-computer
asked Dec 2 at 18:00
Alex Maurer Briggs
264
add a comment |
up vote
5
down vote
favorite
In my loft there is a computer with no branding that needs a new CMOS battery, and one that has the branding 'Tri Data' which I can't find anywhere on the internet.
It just shows a white screen as well and the keyboard doesn't want to work.
(The motherboard says HM386SX Rev 1.1)
identify-this-computer
asked Dec 2 at 18:00
Alex Maurer Briggs
264
1
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00
add a comment |
up vote
5
down vote
favorite
up vote
5
down vote
favorite
In my loft there is a computer with no branding that needs a new CMOS battery, and one that has the branding 'Tri Data' which I can't find anywhere on the internet.
It just shows a white screen as well and the keyboard doesn't want to work.
(The motherboard says HM386SX Rev 1.1)
identify-this-computer
asked Dec 2 at 18:00
Alex Maurer Briggs
264
In my loft there is a computer with no branding that needs a new CMOS battery, and one that has the branding 'Tri Data' which I can't find anywhere on the internet.
It just shows a white screen as well and the keyboard doesn't want to work.
(The motherboard says HM386SX Rev 1.1)
identify-this-computer
identify-this-computer
asked Dec 2 at 18:00
Alex Maurer Briggs
264
asked Dec 2 at 18:00
Alex Maurer Briggs
264
edited Dec 2 at 19:28
asked Dec 2 at 18:00
Alex Maurer Briggs
264
asked Dec 2 at 18:00
Alex Maurer Briggs
264
asked Dec 2 at 18:00
Alex Maurer Briggs
264
264
1
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00
add a comment |
1
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00
1
1
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00
add a comment |
2 Answers
2
active
oldest
votes
up vote
8
down vote
This is one of dozens (hundreds?) of luggable designs that came out of Taiwan and other far east nations in the late 80s/early 90s before everything reverted back to the AT case style. The case was generic and you could put in any compatibly sized mobo, which were also widely available. The "Tri Data" might be a local company or computer shop, anyone could build these and put their label on them. Around 1989 I was selling something similar, but without the knobs at the bottom. IIRC I was called "Compall", and was not related to the modern Compal.
answered Dec 2 at 19:32
Maury Markowitz
2,074422
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
add a comment |
up vote
3
down vote
This looks like a generic, Compaq style schlepable build fron standard components with the Elitegroup HM386SX as a typical generic Heatland 386SX chipset based motherboard. I would dateit as early to mid 1990s. BIOS should be an AMI one.
TriData is eventually name and label the involved PC confectioner did slap on after fiting the components ... usually dreaming to be on par with DELL - and outgrowing them soon :))
answered Dec 2 at 19:55
Raffzahn
44k5100177
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
8
down vote
This is one of dozens (hundreds?) of luggable designs that came out of Taiwan and other far east nations in the late 80s/early 90s before everything reverted back to the AT case style. The case was generic and you could put in any compatibly sized mobo, which were also widely available. The "Tri Data" might be a local company or computer shop, anyone could build these and put their label on them. Around 1989 I was selling something similar, but without the knobs at the bottom. IIRC I was called "Compall", and was not related to the modern Compal.
answered Dec 2 at 19:32
Maury Markowitz
2,074422
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
add a comment |
up vote
8
down vote
This is one of dozens (hundreds?) of luggable designs that came out of Taiwan and other far east nations in the late 80s/early 90s before everything reverted back to the AT case style. The case was generic and you could put in any compatibly sized mobo, which were also widely available. The "Tri Data" might be a local company or computer shop, anyone could build these and put their label on them. Around 1989 I was selling something similar, but without the knobs at the bottom. IIRC I was called "Compall", and was not related to the modern Compal.
answered Dec 2 at 19:32
Maury Markowitz
2,074422
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
add a comment |
up vote
8
down vote
up vote
8
down vote
This is one of dozens (hundreds?) of luggable designs that came out of Taiwan and other far east nations in the late 80s/early 90s before everything reverted back to the AT case style. The case was generic and you could put in any compatibly sized mobo, which were also widely available. The "Tri Data" might be a local company or computer shop, anyone could build these and put their label on them. Around 1989 I was selling something similar, but without the knobs at the bottom. IIRC I was called "Compall", and was not related to the modern Compal.
answered Dec 2 at 19:32
Maury Markowitz
2,074422
This is one of dozens (hundreds?) of luggable designs that came out of Taiwan and other far east nations in the late 80s/early 90s before everything reverted back to the AT case style. The case was generic and you could put in any compatibly sized mobo, which were also widely available. The "Tri Data" might be a local company or computer shop, anyone could build these and put their label on them. Around 1989 I was selling something similar, but without the knobs at the bottom. IIRC I was called "Compall", and was not related to the modern Compal.
answered Dec 2 at 19:32
Maury Markowitz
2,074422
answered Dec 2 at 19:32
Maury Markowitz
2,074422
answered Dec 2 at 19:32
Maury Markowitz
2,074422
answered Dec 2 at 19:32
Maury Markowitz
2,074422
2,074422
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
add a comment |
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
Was this for a Baby AT? I remember the Baby AT mobo's becoming dominant about the same time, but I paired them with the generic Taiwanese PC cases that were as tall but much narrower than a standard PC/AT case.
– Brian H
Dec 3 at 2:55
add a comment |
up vote
3
down vote
This looks like a generic, Compaq style schlepable build fron standard components with the Elitegroup HM386SX as a typical generic Heatland 386SX chipset based motherboard. I would dateit as early to mid 1990s. BIOS should be an AMI one.
TriData is eventually name and label the involved PC confectioner did slap on after fiting the components ... usually dreaming to be on par with DELL - and outgrowing them soon :))
answered Dec 2 at 19:55
Raffzahn
44k5100177
add a comment |
up vote
3
down vote
This looks like a generic, Compaq style schlepable build fron standard components with the Elitegroup HM386SX as a typical generic Heatland 386SX chipset based motherboard. I would dateit as early to mid 1990s. BIOS should be an AMI one.
TriData is eventually name and label the involved PC confectioner did slap on after fiting the components ... usually dreaming to be on par with DELL - and outgrowing them soon :))
answered Dec 2 at 19:55
Raffzahn
44k5100177
add a comment |
up vote
3
down vote
up vote
3
down vote
This looks like a generic, Compaq style schlepable build fron standard components with the Elitegroup HM386SX as a typical generic Heatland 386SX chipset based motherboard. I would dateit as early to mid 1990s. BIOS should be an AMI one.
TriData is eventually name and label the involved PC confectioner did slap on after fiting the components ... usually dreaming to be on par with DELL - and outgrowing them soon :))
answered Dec 2 at 19:55
Raffzahn
44k5100177
This looks like a generic, Compaq style schlepable build fron standard components with the Elitegroup HM386SX as a typical generic Heatland 386SX chipset based motherboard. I would dateit as early to mid 1990s. BIOS should be an AMI one.
TriData is eventually name and label the involved PC confectioner did slap on after fiting the components ... usually dreaming to be on par with DELL - and outgrowing them soon :))
answered Dec 2 at 19:55
Raffzahn
44k5100177
edited Dec 2 at 21:08
answered Dec 2 at 19:55
Raffzahn
44k5100177
answered Dec 2 at 19:55
Raffzahn
44k5100177
answered Dec 2 at 19:55
Raffzahn
44k5100177
44k5100177
add a comment |
add a comment |
Thanks for contributing an answer to Retrocomputing Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fretrocomputing.stackexchange.com%2fquestions%2f8439%2fcan-anyone-help-me-identify-this-computer%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Could it be a customized Compaq Portable II en.m.wikipedia.org/wiki/Compaq_Portable_II ? The size and layout seems to fit, but the panels differ, and the Compaq Portable II was 286 based.
– UncleBod
Dec 2 at 19:12
I thought it could be. It is definitely modified as there is a Mono-RGB switch on the side that isn't soldered to anything.
– Alex Maurer Briggs
Dec 2 at 19:30
If you are asking because you need to find a replacement battery, then a photo of the battery might help. Lots of motherboards have been using CR 2032 for the battery, but I have no idea if CR 2032 batteries have been produced with a brand label rather than the text CR 2032.
– kasperd
Dec 2 at 22:35
@kasperd well its 386SX ... so there is high possibility there is no CR2032 ... back in the days there where either 60mAh Accumulator pack (small cylinder cca ~2.0 cm, long and ~1.5cm in diameter soldered to board with 2 pins each on one base of the cylinder) or old style accupacks (black box cca ~1x1x4 cm with 2 wire cable ... usually glued to board) so no standard battery like we are used to today.
– Spektre
Dec 3 at 9:00